ScJ35.

Murugan K., and Sengupta A.K. (2020). “Seismic performance of strengthened reinforced concrete columns.“ Structures, 27

ScJ34.

Murugan K., and Sengupta A.K. (2020). “Performance of high-strength concrete as jacket material in strengthening applications.“ Indian Concrete Journal, 94

ScJ33.

Mohandoss P., Pillai R.G., and Sengupta A.K. (2020). “Effect of compressive strength of concrete on transmission length of pre-tensioned concrete systems.“ Structures, 23

ScJ32.

Mohandoss P., Sengupta A.K., and Pillai R.G. (2019). “Transmission length of pretensioned concrete systems-comparison of codes and test data.“ Magazine of Concrete Research, 71

ScJ31.

Biswal A., Prasad A.M., and Sengupta A.K. (2019). “Study of shear behavior of grouted vertical joints between precast concrete wall panels under direct shear loading.“ Structural Concrete, 20

ScJ30.

Aranha C.A., Menon A., and Sengupta A.K. (2019). “Determination of the causative mechanism of structural distress in the presidential palace of India.“ Engineering Failure Analysis, 95

ScJ29.

Murugan K., and Sengupta A.K. (2018). “An investigation on shear strength of reinforced concrete columns strengthened by concrete jacketing.“ Journal of Structural Engineering (India), 45

ScJ28.

Murugan K., and Sengupta A.K. (2018). “Investigation of the behaviour of shear-critical reinforced concrete columns.“ Indian Concrete Journal, 92

ScJ27.

Sengupta A.K., and Sarkar S. (2016). “Evaluation of seismic vulnerability of multi-storeyed buildings having columns of different heights in a storey using pushover analysis.“ Journal of Structural Engineering (India), 43

ScJ26.

Teja B.S., and Sengupta A.K. (2016). “Modelling of framed shear walls for non-linear analyses of reinforced concrete buildings.“ Indian Concrete Journal, 90

ScJ25.

Mahajan M.A., Rao G.A., and Sengupta A.K. (2015). “Assessment of effective joint width for exterior eccentric reinforced concrete beam-column joints.“ Journal of Structural Engineering (India), 42

ScJ24.

Firodiya P.K., Sengupta A.K., and Pillai R.G. (2015). “Evaluation of corrosion rates of reinforcing bars for probabilistic assessment of existing road bridge girders.“ Journal of Performance of Constructed Facilities, 29

ScJ23.

Biswal A., Meher Prasad A., and Sengupta A.K. (2015). “Investigation of shear behaviour of vertical joints between precast concrete wall panels.“ Indian Concrete Journal, 89

ScJ22.

Kaliyaperumal G., and Sengupta A.K. (2014). “Seismic behaviour of concrete jacketed columns in buildings.“ Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167

ScJ21.

Geevar I., and Sengupta A.K. (2014). “Modelling of framed shear walls for pushover analysis of reinforced concrete buildings.“ Indian Concrete Journal, 88

ScJ20.

Farheen S., Munda B.S., and Sengupta A.K. (2014). “Seismic forces in members supporting floating columns in a typical reinforced concrete multi-storeyed building.“ Indian Concrete Journal, 88

ScJ19.

Adukadukam A., and Sengupta A.K. (2013). “Equivalent Strut Method for the Modelling of Masonry Infill Walls in the Nonlinear Static Analysis of Buildings.“ Journal of The Institution of Engineers (India): Series A, 94

ScJ18.

Bavukkatt R., Sengupta A.K., and Belarbi A. (2013). “A modified approach to incorporate the poisson's effect in the softened membrane model.“ Journal of Structural Engineering (India), 39

ScJ17.

Kaliyaperumal G., and Sengupta A.K. (2012). “Modelling of the behaviour of reinforced concrete columns retrofitted for flexure using concrete jackets.“ Journal of Structural Engineering (India), 39

ScJ16.

Dharanidaran S., and Sengupta A.K. (2012). “Modelling of tall shear walls for nonlinear analysis of RC buildings under cyclic lateral loading.“ Indian Concrete Journal, 86

ScJ15.

Banerjee S., and Sengupta A.K. (2012). “A computational analysis of the time-variant structural response of the deck of a reinforced concrete road bridge due to corrosion of reinforcing steel.“ Journal of Structural Engineering (India), 39

ScJ14.

Badari Narayanan V.T., Sengupta A.K., and Satish Kumar S.R. (2012). “Seismic retrofit of beams in buildings for flexure using concrete jacket.“ ISET Journal of Earthquake Technology, 49

ScJ13.

Deepak Krishnan M.A., and Sengupta A.K. (2011). “Investigation on behaviour of simply supported unbonded post-tensioned beams.“ Journal of Structural Engineering (Madras), 38

ScJ12.

Chattopadhyaya S., and Sengupta A.K. (2011). “Modelling of tall shear walls for pushover analysis of reinforced concrete buildings.“ Indian Concrete Journal, 85

ScJ11.

Rudra Srinivasa Reddy C., and Sengupta A.K. (2010). “Validation of indices for assessing seismic vulnerability of multi-storeyed buildings with typical vertical irregularities using push-over analysis.“ Journal of Structural Engineering (Madras), 37

ScJ10.

Kaliyaperumal G., and Sengupta A.K. (2009). “Seismic retrofit of columns in buildings for flexure using concrete jacket.“ ISET Journal of Earthquake Technology, 46

ScJ9.

Mamatha S., and Sengupta A.K. (2009). “Investigating the effect of site on seismic forces in buildings.“ Indian Concrete Journal, 83

ScJ8.

Sengupta A.K., and Rao P R.M. (2009). “Quantification of poisson's effect in reinforced concrete panels under in-plane biaxial tension-compression.“ Indian Concrete Journal, 83

ScJ7.

Sengupta A.K., and Menon D. (2008). “Seismic retrofit strategies of buildings.“ Journal of Structural Engineering (Madras), 35

ScJ6.

Sengupta A.K., and Goyal H. (2008). “Indices for assessing seismic vulnerability of buildings based on linear and non-linear static analyses.“ Journal of Structural Engineering (Madras), 35

ScJ5.

Sengupta A.K., and Asokan A. (2008). “Modelling of masonry infill walls for nonlinear static analysis of buildings.“ Indian Concrete Journal, 82

ScJ4.

Gajalakshmi P., and Sengupta A.K. (2006). “Modelling of low-rise shear walls for push-over analysis of buildings.“ Indian Concrete Journal, 80

ScJ3.

Sengupta A.K., Rama Mohana Rao P., and Jacob B. (2005). “Testing RC panels under in-plane biaxial loads.“ Indian Concrete Journal, 79

ScJ2.

Sengupta A.K. (2003). “Constitutive models for plain and reinforced concrete - An overview.“ Indian Concrete Journal, 77

ScJ1.

Sengupta A.K., and Belarbi A. (2001). “Modeling effect of biaxial stresses on average stress-strain relationship of reinforcing bar in reinforced concrete panels.“ ACI Structural Journal, 98

ScC14.

Murugan, K., and Sengupta, A. K. (2018). “A Study on Shear Behaviour of Short Jacketed Columns with Different Interfaces.“ Proceedings, Volume 3, 3rd R. N. Raikar Memorial International Conference and Gettu– Kodur International Symposium, organised by India Chapter of American Concrete Institute, Mumbai, December 14 to 15, 2018, pp. 113 – 119.

ScC13.

Aranha, C.A., Menon, A, and Sengupta, A. K. (2018). “Analysis of the Dome of India's Presidential Residence.“ Proceedings, Paper Number 146, International Conference on Structural Analysis of Historical Constructions, organised by Pontifical Catholic University of Peru, Cusco, Peru, September 11 to 13, 2018.

ScC12.

Joseline, D., Haridasan, H, Rathnarajan, S., Rani, D, Raja, T., Pillai, R. G., Sengupta, A. K., and Menon, A. (2018). “Restoration of Reinforced Lime Concrete Sunshades of a Century Old Heritage Building in New Delhi, India.“ Proceedings, Paper Number 284, International Conference on Structural Analysis of Historical Constructions, organised by Pontifical Catholic University of Peru, Cusco, Peru, September 11 to 13, 2018

ScC11.

Mohandoss, P., Pillai, R. G., and Sengupta, A. K. (2018). “Effect of Compressive Strength of Concrete on the Transmission Length of Pre-tensioned Concrete Systems.“ ACI 123 Concrete Research Poster Session, ACI Spring 2018 Convention, organised by American Concrete Institute, Salt Lake City, USA, March 25 to 29, 2018

ScC10.

Mohandoss, P., Pillai, R. G., Gettu, R, and Sengupta, A. K. (2018). “Factors affecting the Bond Strength of PreTensioned Concrete (PTC) Systems.“ Poster presented at ACI Spring 2018 Convention, organised by American Concrete Institute, Salt Lake City, USA, March 25 to 29, 2018

ScC9.

Giriraju, R., Sengupta, A. K., and Pillai, R. G. (2017). “A Study on Deterioration of Flexural Behaviour of Corroded Pre-Tensioned Beams.“ International Conference on Advances in Construction Materials and Systems, in conjunction with 71st RILEM Annual Week, organised by Indian Institute of Technology Madras in association with RILEM, The international Union of Testing and Research Laboratories for Materials and Structures, Chennai, September 3 to 8, 2017

ScC8.

Kosuru, R., Biswal, A., Prasad, A. M., and Sengupta, A. K. (2017). “Studies on the Behaviour of Concrete Shear Walls.“ Poster presented at International Conference on Advances in Construction Materials and Systems, in conjunction with 71st RILEM Annual Week, organised by Indian Institute of Technology Madras in association with RILEM, The international Union of Testing and Research Laboratories for Materials and Structures, Chennai, September 3 to 8, 2017

ScC7.

Biswal, A., Prasad, A. M, and Sengupta, A. K. (2017). “An Experimental Investigation and Modelling of Shear Behaviour of Vertical Joints between Precast Panels.“ Proceedings (in USB drive), Paper Number 3599, 16th World Conference on Earthquake Engineering, Chilean Association of Seismology and Earthquake Engineering and International Association on Earthquake Engineering, Santiago, Chile, January 9 to 13, 2017

ScC6.

Biswal, A., Prasad, A. M., and Sengupta, A. K. (2015). “Experimental Investigation and Prediction of Shear Behaviour of Vertical Joints between Precast Concrete Wall Panels”, .“ Proceedings, 4th Asian Conference on Ecstasy in Concrete, Indian Concrete Institute, Kolkata, October 8 – 10, 2015, Vol. 1, pp. 91 – 102.

ScC5.

Mohandoss, P., Pillai, R. G., and Sengupta, A. K. (2015). “Comparison of Prediction Models for Transmission Length, Development Length and Shear Capacity of Pre-tensioned Concrete Systems.“ Proceedings, 4th Asian Conference on Ecstasy in Concrete, Indian Concrete Institute, Kolkata, October 8 – 10, 2015, Vol. 2, pp. 183 – 193

ScC4.

Murugan, K. , and Sengupta A. K (2015). “Investigation of Shear Strength and Interface of Columns Strengthened by Concrete Jacketing.“ 5th Annual International Conference on Civil Engineering, Structural Engineering and Mechanics, The Athens Institute for Education and Research, Athens, Greece, May 25 to 28, 2015

ScC3.

Firodiya, P., Pillai, R. G., Sengupta A. K., and Menon, D. (2013). “Corrosion Rates of Plain Mild Steel and ColdTwisted Deformed Steel reinforcement.“ Paper No. 334, Proceedings, UK‒India Education and Research Initiative (UKIERI) Concrete Congress, National Institute of Technology Jalandhar, Punjab, March 5 to 8, 2013.

ScC2.

Badari Narayanan, V. T., Sengupta, A. K., and Satish Kumar, S. R. (2012). “Seismic Retrofit of Beams in Buildings for Flexure using Concrete Jacketing.“ Proceedings (in CD-ROM), Paper Number 20, 15th World Conference on Earthquake Engineering,, Portugese Society of Earthquake Engineering and International Association on Earthquake Engineering, Lisbon, Portugal, September 24 to 28, 2012.

ScC1.

Belarbi Abdeldjelil, and Sengupta A. K. (1996). “Average stress-strain relationships of rebars in RC panels.“ Proceedings of Engineering Mechanics