ScJ36.

Ajeesh S. S, and Arul Jayachandran S. (2021). “Spline finite strip analysis of thin-walled flexural members subjected to general loading with intermediate restraints.“ Thin walled structures

ScJ35.

Suman Kumar Mushahary, Konjengbam Darunkumar Singh, and Arul Jayachandran S. (2020). “Mechanical properties of E350 steel during heating and cooling.“ Thin walled structures, 10.1016/j.tws.2020.107171

ScJ34.

Akshay Mangal Mahar, and S. Arul Jayachandran (2020). “A Computational Study on Buckling Behaviour of Cold-Formed Steel Built-up Columns using Compound Spline Finite Strip Method.“ International Journal of Structural Stability and Dynamics

ScJ33.

Omkar Powar, and Arul Jayachandran (2020). “Learning from Facade Failures over Urban Landscape: Aftermath of Cyclone Vardah.“ Natural Hazards Review, ASCE, 10.1061/(ASCE)NH.1527-6996.0000424,Vol:22 Issue:1

ScJ32.

Omkar Powar, Suresh Kumar, and Arul Jayachandran (2020). “Wind-tunnel evaluation of pressure distribution on building envelope with corner modifications.“ Wind and Structures

ScJ31.

Sulthana U. M, and Jayachandran S. A. (2020). “Concrete Confinement Effect in Circular Concrete Sandwiched Double Steel Tubular Stub-Columns.“ International Journal of Steel Structures, 1,14

ScJ30.

Rajkannu J. S, and Jayachandran S. A. (2020). “Flexural-torsional buckling strength of thin-walled channel sections with warping restraint.“ Journal of Constructional Steel Research, 169, 106041.

ScJ29.

Ajeesh S.S, and Jayachandran S. A (2019). “Direct Strength Design of Cold-Formed Steel Members Using Constrained Spline Finite Strip Method.“ International Journal of Steel Structures, 19(6), 1801-1813

ScJ28.

Mashudha Sulthana U, Arul Jayachandran S, and Praveena M (2018). “Experimental and analytical study of concrete filled hollow steel tubular columns.“ International Journal Constructional Steel research

ScJ27.

Mini Koshy, and Arul Jayachandran S (2018). “Investigations on the wind uplift behavior of standing seam cold formed steel roofing sheets.“ Journal of Structural, Engineering, SERC

ScJ26.

Mini Koshy, and Arul Jayachandran S. (2018). “Experimental and safety evaluation of cold formed steel standing seam metal roof panels.“ Practice Periodical on Structural Design and Construction, ASCE

ScJ25.

Ajeesh S S, and Arul Jayachandran S (2017). “A constrained spline finite strip method for the mode decomposition of cold-formed steel sections using GBT principles.“  Thin-Walled Structures., 113, 83-93

ScJ24.

Mashudha Sulthana U, Arul Jayachandran S, and Praveena M (2017). “Experimental studies on long column concrete filled double skinned steel tubes under axial loading.“ Structures, Elsevier, Institution of Structural Engrs UK.

ScJ23.

Ajeesh S S, and Arul Jayachandran S (2016). “Simplified semi-analytical model for elastic distortional buckling prediction of cold-formed steel flexural members.“ Thin-Walled Structures. , 106, 420-427

ScJ22.

Ramalingam R, and Arul Jayachandran S (2016). “Computational framework for mimicking prototype failure testing of transmission line towers.“ Engineering Structures. , 123, 181-191

ScJ21.

VijayaVengadesh Kumar, and Arul Jayachandran S. (2016). “Experimental investigation and evaluation of Direct Strength Method on beam-column behavior of uprights.“ Thin-Walled Structures, 102, 165-179.

ScJ20.

Ramalingam, and Arul Jayachandran S. (2016). “A computational method for the inelastic postbuckling of steel space structures with bolt slip.“ International Journal of Structural Stability and Dynamics

ScJ19.

Ramalingam R., and Arul Jayachandran (2015). “Postbuckling behaviour of flexibly connected single layer steel domes.“ Journal of Constructional Steel Research, 114, 136-145.

ScJ18.

Prabha P, Arul Jayachandran S, Saravanan, and Marimuthu V (2011). “Prediction of the tensile capacity of cold formed angles experiencing shear lag.“ International journal of Thin Walled structures, Vol.49, pp.1348-1358.

ScJ17.

Arul Jayachandran S, Marimuthu V, Saravanan M, and Prabha P (2010). “Large deflection and postbuckling behaviour of thin plates resting on nonlinear elastic medium.“ International Journal of Structural Stability and Dynamics

ScJ16.

Lakshmikandhan K.N., Senthil R., Arul Jayachandran S., and Sivakumar P. and Ravichandran R. (2010). “A parametric study on the behaviour of steel and composite space structures.“ International Journal of Space Structures, Vol. 25, No. 3, pp. 169-183

ScJ15.

Prabha P, Marimuthu V, Saravanan M, and Arul Jayachandran S (2010). “Evaluation Of Connection Flexibility In Cold-Formed Steel Racks.“  International Journal of Constructional Steel Research, Volume 66, Issue 7, Pages 863-872

ScJ14.

Saravanan, Arul Jayachandran. S, Marimuthu. V, and Prabha. P (2009). “Advanced analysis of cyclic behaviour of plane steel frames with semi-rigid connections.“  International Journal of Steel and Composite structures, Vol.9, No.4, pp. 381-395

ScJ13.

S. Arul Jayachandran, V. Marimuthu, P. Prabha, and S. Seetharaman and N. Pandian (2009). “Investigations on the behaviour of semi-rigid endplate connections.“  International Journal of Advanced Steel construction, Vol.5, No.4, 432-451

ScJ12.

P. Prabha, V. Marimuthu, S. Arul Jayachandran, and S. Seetharaman and N. Raman (2008). “An improved polynomial model for top and seat-angle connection.“ International Journal of Steel and Composite structures, Vol.8, No.5

ScJ11.

Arul Jayachandran S., and Seetharaman S. and Susan Abraham (2008). “Simple formulation for the flexure of plates on nonlinear foundation.“ International Journal of Engineering Mechanics, ASCE, V. 134, N. 1, pp. 110-115

ScJ10.

Arul Jayachandran, and Donald W. White (2008). “Variable order secant matrix technique applied to the elastic post buckling of arches.“ International Journal of Communications in Numerical Methods in Engineering, Volume 24 Issue 8 , pp.701-710

ScJ9.

Marimuthu V, Seetharaman S, Arul Jayachandran S, Chellappan A, Bandyopadhyay TK, and Datta D (2007). “Experimental studies on composite deck slabs to determine the shear-bond characteristic (m-k) values of the embossed profiled sheet.“ International Journal of Constructional Steel Research, Vol. 63, No. 6, pp.791-803 | https://www.journals.elsevier.com/journal-of-constructional-steel-research

ScJ8.

Arul Jayachandran S, Soundararajan A, Seetharaman S, and Samuel Knight (2004). “Modulus of core reaction approach to the buckling of sandwich plates.“ International Journal of Structural Stability and Dynamics, 4(4)

ScJ7.

Arul Jayachandran S, V Kalyanaraman, and R Narayanan (2004). “A co-rotation based secant matrix techique for the postbuckling analysis of truss structures.“ International Journal of Structural Stability and Dynamics, 4(1), 1-19

ScJ6.

Arul Jayachandran S, V Kalyanaraman, and R Narayanan (2004). “Maguerre shell type secant matrices for the postbuckling analysis of thin composite shells.“ International Journal of Struct. Engg. and Mechanics, Vol.18, No.1, 2004, pp41-58.

ScJ5.

Arul Jayachandran S, S Gopalakrishnan, and R Narayanan (2003). “Improved secant matrices for the postbuckling analysis of thin composite plates.“ International Journal of Structural Stability and Dynamics, 3(3), 355-37.

ScJ4.

Alagusundaramurthy P, Arul Jayachandran S, and Sundaravadivelu P (2003). “Stability of stiffened plates.“ Journal of Engg. Mechanics, ASCE, Vol.129, No.7, pp 751-758.

ScJ3.

Arul Jayachandran S, S Gopalakrishnan, and R Narayanan (2001). “Explicit incremental matrices for the postbuckling analysis of thin plates with small initial curvature.“  International Journal of Struct. Engg. and Mechanics, 12(3), 283-295.

ScJ2.

Arul Jayachandran S, and CV Vaidyanathan (1999). “Post critical behaviour of biaxially compressed plates on elastic foundation.“ International Journal of Computers and Structures, Vol.54, No,2, pp-239-246.

ScJ1.

Vaidyanathan CV, and Arul Jayachandran S (1991). “Plates on Elastic Foundation.“ Journal of Structural Engineering, ASCE, Vol. No. 117

ScC21.

Akshay Mangal Mahar, and Arul Jayachandran (2020). “Investigations on buckling behavior of intermittently fastened cold-formed steel built-up columns using spline finite strip method.“ Annual Stability Conference Structural Stability Research Council (SSRC), Atlanta, USA

ScC20.

J Sevugan Rajkannu., and Arul Jayachandran (2020). “Investigation on the stability behaviour of cold-formed steel Beam-column members under bi-axial bending..“ Annual Stability Conference Structural Stability Research Council (SSRC), Atlanta, USA

ScC19.

Soumya Prakash, and S. Arul Jayachandran (2020). “Post lateral torsional buckling predictions of thin walled open sections.“ Cold Formed Steel Research Consortium (CFSRC), Online, USA

ScC18.

Ranjith, K., and Arul Jayachandran S. (2019). “Configuration based on crystallographic parameters and system stability of reticulated domes.“ 60th IASS (International Association for Shell and Spatial structures) Annual Symposium, Barcelona, Spain, 970-977

ScC17.

Omkar Powar, and Arul Jayachandran (2019). “Localized effects due to aerodynamic modifications in buildings: A State-of-Art Review.“ GeoMEast 2019 International Congress and Exhibition, Egypt, 98-127

ScC16.

Mashudha Sultana, and Arul Jayachandran.S (2019). “Investigations on the Global Stability of High Strength Concrete Sandwiched Square Double Steel Tubular Columns.“ 17th International symposium on tubular structures, Singapore, 231 - 238

ScC15.

Soumya Prakash, and S. Arul Jayachandran (2019). “Post lateral torsional buckling predictions of thin walled open sections.“ International Conference on Advances in Steel Structures, Egypt Steel 19 (ES 19), Cairo, Egypt

ScC14.

Arul Jayachandran.S. (2019). “Stability evaluation of cold formed steel pallet racks under seismic condition- A Numerical and shake table study.“ Annual Stability Conference Structural Stability Research Council (SSRC), St.louis, USA, 1,390-400

ScC13.

J Sevugan Rajkannu., and Arul Jayachandran (2019). “Investigation on the effect of warping on the stability behaviour of cold-formed steel Beam-column..“ Annual Stability Conference Structural Stability Research Council (SSRC), St.louis, USA, 2, 902-920

ScC12.

Mashudha Sultana, and Arul Jayachandran.S (2018). “Investigations on global buckling behaviour of concrete filled double skinned steel tubular columns.“ 12th International Conference on Advances in Steel-Concrete Composite Structures, Valencia, Spain, 419 - 424

ScC11.

Arul Jayachandran.S. (2018). “Prediction of Limit Point Buckling In Reticulated Metal Shells.“ International Conference on Advances in Steel Structures (ICASS), Hongkong, china, 543-551

ScC10.

J Sevugan Rajkannu., and Arul Jayachandran (2018). “Investigations on Design implementation of cold-formed steel beam-column members using direct strength method.“ Eighth International conference on Thin Walled Structures, Lisbon, Portugal, Paper no 159 (1-10)

ScC9.

Ajeesh, S. S., Arul Jayachandran, and S. (2018). “Elastic buckling of cold-formed steel complex cross sections using constrained spline finite strip method (cSFSM).“ International Conference on Advances in Steel Structures (ICASS), Hongkong, china, 543-551

ScC8.

Jashnav Pancheti, and Arul S Jayachandran (2018). “Implication of the end connection type of steel beams on the critical/limiting temperature equation.“ 10th International Conference on Structures in Fire, Belfast, United Kingdom,827-833

ScC7.

Omkar Powar, and Arul Jayachandran (2017). “Issues in probability based design of architectural glass in buildings.“ International Conference on Advances in Glass Sciences and Technology, India, Kolkatta

ScC6.

Ramalingam, R., Arul Jayachandran, and S. (2016). “Automatic Scheme for Inelastic Column Buckling.“ World Congress on Civil, Structural and Environmental Engineering, Prague, Czech Republic, ICSENM 122 (1-8)

ScC5.

Mashudha Sulthana, U., Arul Jayachandran, S., and Praveena, and M (2015). “Experimental studies on CFDST sections under axial loading.“ 11th Int. conference on Advances in Steel and Concrete Composite Structures, Beijing ,China,268 - 273

ScC4.

Ajeesh, S. S., Arul Jayachandran, and S (2015). “Static and buckling analysis of plates using spline finite strip method with modified amending schemes.“ World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Korea

ScC3.

Jain, Arul Jayachandran, and S. (2015). “Linear Behaviour of thin walled open sections using GBT.“ International conference on Civil, Structures and Transportation Engineering (ICCSTE), Canada

ScC2.

Ramalingam, R., Arul Jayachandran, and S. (2013). “Postbuckling Behaviour of Reticulated Shells with Connection Semi-Rigidity.“ 10th Pacific Structural Steel Conference, Singapore

ScC1.

Vijaya Vengadesh Kumar, J., Arul Jayachandran, and S (2013). “Direct Strength Method of Design for Concentrically Loaded Perforated Rack Columns.“ 10th Pacific Structural Steel Conference, Singapore, 212-217