ScJ24.

Saravanan, M, Goswami, R, and Palani, G (2022). “Design of a Fuse Link Beam-to-Column Connection for Earthquake Resistant Moment Frames.“ Journal of Constructional Steel Research, , 192, 107253

ScJ23.

Vijayanarayanan, A.R, Goswami, R, and Murty (2022). “A Method for Seismic Design of RC Frame Buildings using Fundamental Mode and Plastic Rotation Capacity.“ The Bulletin, NZSEE,, 55(2), 112-128

ScJ21.

Joju, J, and Goswami, R (2021). “Simplified design approaches for panel zones in steel special moment frame buildings.“ Proceedings of the Institution of Civil Engineers – Structures and Buildings, 176(9), 677–693

ScJ21.

Palissery, S, Goswami, R, and Murty, C.V.R (2021). “Design of RC moment frame buildings consistent with earthquake resistant design philosophy.“ Earthquakes and Structures, 20(6)

ScJ20.

Saravanan, M., Goswami, R., and Palani, G.S. (2021). “Energy dissipative beam-column connection for earthquake resistant moment frames.“ Journal of Constructional Steel Research, 176,106428

ScJ19.

Zeneeb, A.M., Goswami, R., and Murty, C.V.R. (2020). “Lateral shear strength of rectangular RC columns subjected to combined P-V-M monotonic loading.“ Bulletin of the New Zealand Society for Earthquake Engineering, 53(4), pp. 227-241

ScJ18.

Pitchai P., Saravanan U., and Goswami R. (2019). “Mechanics-based algorithms to determine the current state of a bridge using quasi-static loading and strain measurement.“ Structural Health Monitoring, 18

ScJ17.

Saravanan M., Goswami R., and Palani G.S. (2018). “Replaceable Fuses in Earthquake Resistant Steel Structures: A Review.“ International Journal of Steel Structures, 18

ScJ16.

Deshmukh A.B., and Goswami R. (2018). “Use of walls in controlling detrimental effects of stiffness irregularity in RC buildings on hill slopes.“ Indian Concrete Journal, 92

ScJ15.

Kasar A.A., Bharti S.D., Shrimali M.K., and Goswami R. (2017). “Mechanics based force-deformation curve of steel beam to column moment joints.“ Steel and Composite Structures, 25

ScJ14.

Vijayanarayanan A.R., Goswami R., and Murty C.V.R. (2017). “Identifying stiffness irregularity in buildings using fundamental lateral mode shape.“ Earthquake and Structures, 12

ScJ13.

Sunitha P., Goswami R., and Murty C.V.R. (2016). “Idealised bilinear moment-curvature curves of RC sections for pushover analysis of RC frame buildings.“ Indian Concrete Journal, 90

ScJ12.

Sunitha P., Goswami R., and Murty C.V.R. (2016). “Seismic behaviour of RC moment resisting frame buildings designed and detailed as per first revision of IS 13920 draft provisions.“ Indian Concrete Journal, 90

ScJ11.

Majeed A.Z., Goswami R., and Murty C.V.R. (2015). “Mechanics-driven hand calculation approach for obtaining design P-M interaction curves of RC sections.“ Indian Concrete Journal, 89

ScJ10.

Balasubramanian S.R., Maheswari D., Cynthia A., Balaji Rao K., Prasad A.M., Goswami R., and Sivakumar P. (2015). “Experimental determination of statistical parameters associated with uniaxial compression behaviour of brick masonry.“ Current Science, 109

ScJ9.

Balasubramanian S.R., Balaji Rao K., Meher Prasad A., Goswami R., and Anoop M.B. (2014). “A methodology for development of seismic fragility curves for URBM buildings.“ Earthquake and Structures, 6

ScJ8.

Dasgupta K., Goswami R., and Murty C.V.R. (2010). “Seismic shear design of deep RC vertical members: Recommended provisions for Indian codes.“ Indian Concrete Journal, 84

ScJ7.

Dasgupta K., Goswami R., and Murty C.V.R. (2010). “Seismic shear design of deep RC vertical members: A review of codal provisions.“ Indian Concrete Journal, 84

ScJ6.

Goswami R., and Murty C.V.R. (2010). “Externally reinforced welded i-beam-to-box-column seismic connection.“ Journal of Engineering Mechanics, 136

ScJ5.

Goswami R., and Murty C.V.R. (2009). “Suitability of tapered flange I-sections in seismic moment resisting frames.“ Advanced Steel Construction, 5

ScJ4.

Goswami R., Arlekar J.N., and Murty C.V.R. (2005). “Concerns on seismic moment-shear connections using available Indian hot-rolled I-sections.“ Journal of Structural Engineering (Madras), 32

ScJ3.

Goswami R., Arlekar J.N., and Murty C.V.R. (2005). “Limitations of available Indian hot-rolled I-sections for use in seismic steel moment resisting frames.“ Journal of Structural Engineering (Madras), 32

ScJ2.

Goswami R., and Murty C.V.R. (2003). “Seismic shear design of RC bridge piers - Part II: Numerical investigation of IRC provisions.“ Indian Concrete Journal, 77

ScJ1.

Goswami R., and Murty C.V.R. (2003). “Seismic shear design of RC bridge piers - Part I: Review of code provisions.“ Indian Concrete Journal, 77

ScC4.

Deviprasad, G.M., Goswami, R., and Sunitha, P. (2022). “Effect of Stiffness and Strength of URM Infill Walls on Seismic Demand and Response of RC Buildings with Open Ground Storey.“ Proceedings of the 17th Symposium on Earthquake Engineering (17SEE, 14-17 November 2022, Roorkee, India, LNCE, 329, 111-124

ScC3.

Bansode, P. , and Goswami, R. (2022). “Seismic Design of Periphery RC Beams in Buildings with Large Plan Aspect Ratio,.“ Proceedings of the 17th Symposium on Earthquake Engineering (17SEE), 14-17 November 2022, Roorkee, India, LNCE, 331, 127-140

ScC2.

Saravanan, M, Goswami, R., and Palani, G.S. (2022). “Studies on moment-resisting fuse link beam-to-column connection for earthquake resilient steel moment frame buildings.“ Proceedings of the 10th International Conference on the Behaviour of Steel Structures In Seismic Areas (STESSA 2022), 25-27 May 2022, Timisoara, Romania, Paper ID 275, LNCE, 262, 828 – 836

ScC1.

Sunitha P., Murty C.V.R., and Goswami R. (2014). “Quantifying parameters that ensure large deformability of earthquake resistant RC buildings in high seismic regions.“ NCEE 2014 - 10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering