ScJ17.

Anirudhan, I.V., Maji, and V.B. (2019). “Preface.“ Lecture Notes in Civil Engineering, 13

ScJ16.

Chatra A.S., Dodagoudar G.R., and Maji V.B. (2019). “Numerical modelling of rainfall effects on the stability of soil slopes.“ International Journal of Geotechnical Engineering, 13

ScJ15.

Varma M., Maji V.B., and Boominathan A. (2019). “Numerical modeling of a tunnel in jointed rocks subjected to seismic loading.“ Underground Space (China), 4

ScJ14.

Sivakumar G., and Maji V.B. (2018). “A Study on Crack Initiation and Propagation in Rock with Pre-existing Flaw Under Uniaxial Compression.“ Indian Geotechnical Journal, 48

ScJ13.

Senthilkumar V., Chandrasekaran S.S., and Maji V.B. (2018). “Rainfall-induced landslides: Case study of the Marappalam landslide, Nilgiris district, Tamil Nadu, India.“ International Journal of Geomechanics, 18

ScJ12.

Maji V.B. (2018). “Numerical analysis of Shiobara hydropower cavern using practical equivalent approach.“ Journal of Rock Mechanics and Geotechnical Engineering, 10

ScJ11.

Hanumanthappa M., and Maji V.B. (2017). “Empirical and Numerical Analyses of Tunnel Closure in Squeezing Rock.“ International Journal of Geosynthetics and Ground Engineering, 3

ScJ10.

Senthilkumar V., Chandrasekaran S.S., and Maji V.B. (2017). “Geotechnical characterization and analysis of rainfall—induced 2009 landslide at Marappalam area of Nilgiris district, Tamil Nadu state, India.“ Landslides, 14

ScJ9.

Maji V.B., and Theja G.V. (2017). “A New Performance Prediction Model for Rock TBMs.“ Indian Geotechnical Journal, 47

ScJ8.

Maji V.B. (2017). “An insight into slope stability using strength reduction technique.“ Journal of the Geological Society of India, 89

ScJ7.

Maji V.B., Sowmiyaa V.S., and Robinson R.G. (2016). “A Simple Analysis of Reinforced Soil Using Equivalent Approach.“ International Journal of Geosynthetics and Ground Engineering, 2

ScJ6.

Ravichandran V., Maji V.B., and Gandhi S.R. (2015). “Field Testing of Suction Anchors for Mooring Applications.“ Indian Geotechnical Journal, 45

ScJ5.

Maji V.B., and Sitharam T.G. (2012). “Testing and evaluation of strength and deformation behaviour of jointed rocks.“ Geomechanics and Geoengineering, 7

ScJ4.

Karthiga Devi S.G., Dodagoudar G.R., and Maji V.B. (2012). “Control of SDOF system using magnetorheological damper and fuzzy logic.“ Journal of Structural Engineering (Madras), 38

ScJ3.

Sitharam T.G., Ramulu M., and Maji V.B. (2010). “Static and dynamic elastic modulus of jointed rock mass: Influence of joint frequency, joint inclination and joint factor.“ International Journal of Geotechnical Earthquake Engineering, 1

ScJ2.

Maji V.B., and Sitharam T.G. (2008). “Prediction of elastic modulus of jointed rock mass using artificial neural networks.“ Geotechnical and Geological Engineering, 26

ScJ2.

Varma, M., Maji, V.B., Boominathan, and A. (2019). “Numerical modeling of a tunnel in jointed rocks subjected to seismic loading.“ Underground Space (China), 4

ScJ1.

Sitharam T.G., Maji V.B., and Verma A.K. (2007). “Practical equivalent continuum model for simulation of jointed rock mass using FLAC3D.“ International Journal of Geomechanics, 7

ScJ1.

Chatra, A.S., Dodagoudar, G.R., Maji, and V.B. (2019). “Numerical modelling of rainfall effects on the stability of soil slopes.“ International Journal of Geotechnical Engineering, 13

ScC9.

Rai R., Singh V.K., Singh S., and Maji V.B. (2020). “Failure investigation of internal dragline dump slope - A case study.“ 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019

ScC8.

Varma M., Maji V.B., and Boominathan A. (2018). “Effect of joint stiffness in rock tunnels under dynamic loading.“ ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018

ScC7.

Maji V.B., Dharani Raj S.V., and Partha Sai M. (2018). “Post peak behavior of rocks and its numerical simulation considering softening.“ ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018

ScC6.

Varma M., Maji V.B., and Boominathan A. (2017). “A study on ultrasonic wave propagation across fractures in jointed rocks.“ 51st US Rock Mechanics / Geomechanics Symposium 2017

ScC5.

Maji V.B., and Theja G.V. (2015). “Performance prediction of rock tbms considering uncertainties in the geotechnical parameters.“ 13th ISRM International Congress of Rock Mechanics

ScC4.

Sivakumar G., and Maji V.B. (2014). “Finite element simulation of crack initiation and propagation in rocks.“ Rock Engineering and Rock Mechanics: Structures in and on Rock Masses - Proceedings of EUROCK 2014, ISRM European Regional Symposium

ScC3.

Maji V.B. (2012). “Understanding failure mode in uniaxial and triaxial compression for a hard brittle rock.“ Harmonising Rock Engineering and the Environment - Proceedings of the 12th ISRM International Congress on Rock Mechanics

ScC2.

Maji V.B., and Sitharam T.G. (2010). “Stability of slope based on shear strain criterion and its dependency on shear strength.“ Rock Mechanics in Civil and Environmental Engineering - Proceedings of the European Rock Mechanics Symposium, EUROCK 2010

ScC2.

Varma, M., Maji, V.B., Boominathan, and A. (2018). “Effect of joint stiffness in rock tunnels under dynamic loading.“ ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018

ScC1.

Rai, R., Singh, V.K., Singh, S., Maji, and V.B. (2020). “Failure investigation of internal dragline dump slope - A case study.“ 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2019

ScC1.

Maji V.B., and Sitharam T.G. (2009). “Practical approach to modelling of jointed rocks as Equivalent Continuum.“ ISRM International Symposium on Rock Mechanics, SINOROCK 2009

ScC.

Maji, V.B., Dharani Raj, S.V., Partha Sai, and M. (2018). “Post peak behavior of rocks and its numerical simulation considering softening.“ ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018

ScC.

Varma, M., Maji, V.B., Boominathan, and A. (2017). “A study on ultrasonic wave propagation across fractures in jointed rocks.“ 51st US Rock Mechanics / Geomechanics Symposium 2017

ScC.

Maji, V.B., Theja, and G.V. (2015). “Performance prediction of rock tbms considering uncertainties in the geotechnical parameters.“ 13th ISRM International Congress of Rock Mechanics

ScC.

Sivakumar, G., Maji, and V.B. (2014). “Finite element simulation of crack initiation and propagation in rocks.“ Rock Engineering and Rock Mechanics: Structures in and on Rock Masses - Proceedings of EUROCK 2014, ISRM European Regional Symposium

ScC.

Maji, and V.B. (2012). “Understanding failure mode in uniaxial and triaxial compression for a hard brittle rock.“ Harmonising Rock Engineering and the Environment - Proceedings of the 12th ISRM International Congress on Rock Mechanics

ScC.

Maji, V.B., Sitharam, and T.G. (2010). “Stability of slope based on shear strain criterion and its dependency on shear strength.“ Rock Mechanics in Civil and Environmental Engineering - Proceedings of the European Rock Mechanics Symposium, EUROCK 2010

ScC.

Maji, V.B., Sitharam, and T.G. (2009). “Practical approach to modelling of jointed rocks as Equivalent Continuum.“ ISRM International Symposium on Rock Mechanics, SINOROCK 2009