Journals |
Click on plus symbols ( ) |
Scopus Indexed Journals |
ScJ126. |
Samanthula R, Gettu R, and Paul S (2025). “Experimental evaluation of size effect on the fracture response of glass textile reinforced concrete .“ Materials and Structures, 58 |
ScJ125. |
Samanthula R, Gettu R, Paul S, and Zerbino R.L (2024). “Effect of the end conditions on the response of glass textile reinforced cementitious composites under uniaxial tension .“ Materials and Structures, 57 |
ScJ124. |
Haripan V, Gettu R, and Santhanam M (2024). “Assessment of the CO2 sequestration potential of waste concrete fines .“ Materials and Structures, 57 |
ScJ123. |
Liu X, Asghari V, Lam C.-M, Hsu S.-C, Xuan D, Angulo S.C, John V.M, Basavaraj A.S, Gettu R, Xiao J, and Poon C.-S. (2024). “Discrepancies in life cycle assessment applied to concrete waste recycling: A structured review .“ Journal of Cleaner Production, 434 |
ScJ122. |
Paul S, Murugan K, Samanthula R, Basavaraj A.S, Stephen S.J, Gettu R, and Zerbino R.L (2023). “Development Of Structural Forms Using Textile Reinforced Concrete .“ Indian Concrete Journal, 97 |
ScJ121. |
Basavaraj A.S.,, Muni H, Dhandapani Y, Gettu R, and Santhanam M (2023). “Limestone-Calcined Clay (LC2) as a supplementary cementitious material for concrete .“ RILEM Technical Letters, 8 |
ScJ120. |
Rengaraju S, Pillai R.G, and Gettu R (2023). “Input parameters and nomograms for service life-based design of reinforced concrete structures exposed to chlorides .“ Structures, 56 |
ScJ119. |
Paul S, and Gettu R (2023). “Engineering the Tensile Response of Glass Textile Reinforced Concrete for Thin Elements .“ Sustainability (Switzerland), 15 |
ScJ118. |
Sharma A, Basavaraj A.S, Chaunsali P, and Gettu R (2023). “Calcium Sulfoaluminate Cement Manufacturing in India- Prospects and Prognosis of Environmental Impacts .“ ACI Structural Journal, 120 |
ScJ117. |
Prajapati R, Stephen S.J, Gettu R, and Singh S (2023). “Effect Of Thermomechanically Beneficiated Recycled Concrete Aggregates On The Mechanical And Durability Characteristics Of Concrete .“ Indian Concrete Journal, 97 |
ScJ116. |
Paul S, Gettu R, Naidu Arnepalli D, and Samanthula R (2023). “Experimental evaluation of the durability of glass Textile-Reinforced concrete .“ Construction and Building Materials, 406 |
ScJ115. |
Mohan M.K, Manohar S, Pillai R.G, Santhanam M, and Gettu R (2023). “High-performance cementitious grouts for post-tensioned concrete systems – Performance specifications and prototype testing .“ Construction and Building Materials, 368 |
ScJ114. |
Khute S, Singh S, Zerbino R, and Gettu R (2022). “Fresh-State Behavior Of Paving Concrete Reinforced With Discarded Coconut Coir Fibres .“ Indian Concrete Journal, 96 |
ScJ113. |
Basavaraj A.S, and Gettu R (2022). “Life Cycle Assessment As A Tool In Sustainability Assessment Of Concrete Systems: Why And How? .“ Indian Concrete Journal, 96 |
ScJ112. |
Gunthe S.S, and Gettu R (2022). “A new index for assessing faculty research performance in higher educational institutions of emerging economies such as India .“ Scientometrics, 127 |
ScJ111. |
Nayar S.K, Premavathy A, Santhanam M, Gettu R, and Boustingorry P (2022). “Assessment Of A Methodology For Design Of Scc Mixes By Robustness Studies .“ Indian Concrete Journal, 96 |
ScJ110. |
Rathnarajan S, Dhanya B.S, Pillai R.G, Gettu R, and Santhanam M (2022). “Carbonation model for concretes with fly ash, slag, and limestone calcined clay - using accelerated and five - year natural exposure data .“ Cement and Concrete Composites, 126 |
ScJ109. |
Prajapati R, Gettu R, Singh S, and Rathod B.J (2022). “A novel beneficiation process for producing high-quality recycled concrete aggregates using concentrated solar energy .“ Materials and Structures, 55 |
ScJ108. |
Gopinath S, Iyer N.R, and Gettu R (2021). “Non-Iterative Model for Analysis of RC Beams Strengthened with Textile Reinforced Concrete .“ Australian Journal of Structural Engineering, 22 |
ScJ107. |
Mohan M.K, Pillai R.G, Santhanam M, and Gettu R. (2021). “High-performance cementitious grout with fly ash for corrosion protection of post-tensioned concrete structures .“ Construction and Building Materials, 281 |
ScJ106. |
Rengaraju S, Pillai R.G, Gettu R, and Neelakantan L (2021). “Effect of Test Methods on Corrosion Phenomena of Steel in Highly Resistive Concrete Systems and Data Interpretations .“ Corrosion, 77 |
ScJ105. |
Sakthivel T, Gettu R, and Pillai R.G (2021). “Drying shrinkage of concrete with blended cementitious binders: experimental study and application of models .“ Indian Concrete Journal, 95 |
ScJ104. |
Mohandoss P, Pillai R.G, and Gettu R (2021). “Determining bond strength of seven-wire strands in prestressed concrete .“ Structures, 33 |
ScJ103. |
Sakthivel T, Gettu R, and Pillai R.G (2021). “Adjustment of rilem b4 model parameters for better prediction of the shrinkage response of blended cement concrete .“ Indian Concrete Journal, 95 |
ScJ102. |
Bhattacherjee S, Basavaraj A.S, Rahul A.V, Santhanam M, Gettu R, Panda B, Schlangen E, Chen Y, Copuroglu O, Ma G, Wang L, Basit Beigh M.A, and Mechtcherine V (2021). “Sustainable materials for 3D concrete printing .“ Cement and Concrete Composites, 122 |
ScJ101. |
Prajapati R, Gettu R, and Singh S (2021). “Thermomechanical beneficiation of recycled concrete aggregates (RCA) .“ Construction and Building Materials, 310 |
ScJ100. |
Stephen S.J, Zangelmi Júnior E, Gettu R, Aguado A, and Vaishnav Kumar S (2021). “Determination of the complete stress-strain response of concrete under uniaxial compression .“ Indian Concrete Journal, 95 |
ScJ99. |
Nayar S.K., and Gettu R. (2020). “Mechanistic-empirical design of fibre reinforced concrete (FRC) pavements using inelastic analysis.“ Sadhana - Academy Proceedings in Engineering Sciences, ,45(1), 19 |
ScJ98. |
Nair N., Mohammed Haneefa K., Santhanam M., and Gettu R. (2020). “A study on fresh properties of limestone calcined clay blended cementitious systems.“ Construction and Building Materials, ,254, 119326 |
ScJ97. |
Stephen S.J., and Gettu R. (2020). “Fatigue fracture of fibre reinforced concrete in flexure.“ Materials and Structures/Materiaux et Constructions, ,53(3), 56 |
ScJ96. |
Prakasan S., Palaniappan S., and Gettu R. (2020). “Study of Energy Use and CO2 Emissions in the Manufacturing of Clinker and Cement.“ Journal of The Institution of Engineers (India): Series A, ,101(1), 221-232 |
ScJ95. |
Dhandapani Y., Santhanam M., Gettu R., and Pillai R.G. (2020). “Perspectives on blended cementitious systems with calcined clay-limestone combination for sustainable low carbon cement transition.“ Indian Concrete Journal, ,94(2), 31-45 |
ScJ94. |
Gettu R., Patel A., Rathi V., Prakasan S., Basavaraj A.S., Palaniappan S., and Maity S. (2019). “Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context.“ Materials and Structures/Materiaux et Constructions, ,52(1), 10 |
ScJ93. |
Jose S., and Gettu R. (2019). “Comparison of flexural toughness parameters for fibre reinforced concrete from notched and unnotched beam tests.“ Indian Concrete Journal, ,98(2), 23-30 |
ScJ92. |
Stephen S.J., Raphael B., Gettu R., and Jose S. (2019). “Determination of the tensile constitutive relations of fiber reinforced concrete using inverse analysis.“ Construction and Building Materials, ,195, 405-414 |
ScJ91. |
Pillai R.G., Gettu R., Santhanam M., Rengaraju S., Dhandapani Y., Rathnarajan S., and Basavaraj A.S. (2019). “Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (LC3).“ Cement and Concrete Research, ,118, 111-119 |
ScJ90. |
Huy Vu Q., Pham G., Chonier A., Brouard E., Rathnarajan S., Pillai R., Gettu R., Santhanam M., Aguayo F., Folliard K.J., Thomas M.D., Moffat T., Shi C., and Sarnot A. (2019). “Impact of different climates on the resistance of concrete to natural carbonation.“ Construction and Building Materials, ,216, 450-467 |
ScJ89. |
Stephen S.J., and Gettu R. (2019). “Rate-dependence of the tensile behaviour of fibre reinforced concrete in the quasi-static regime.“ Materials and Structures/Materiaux et Constructions, ,52(5), 107 |
ScJ88. |
Sakthivel T., Gettu R., and Pillai R.G. (2019). “Compressive Strength and Elastic Modulus of Concretes with Fly Ash and Slag.“ Journal of The Institution of Engineers (India): Series A, ,100(4), 575-584 |
ScJ87. |
Dhanya B.S., Rathnarajan, S., Santhanam M., Pillai R.G., and Gettu R. (2019). “Carbonation and its effect on microstructure of concrete with fly ASH and ground granulated blast furnace slag.“ Indian Concrete Journal, ,93(4), 10-21 |
ScJ86. |
Dhandapani Y., Sakthivel T., Santhanam M., Gettu R., and Pillai R.G. (2018). “Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3).“ Cement and Concrete Research, ,107, 136-151 |
ScJ85. |
Jose S., Gettu R., and Indhuja S. (2018). “Flexural toughness characterization of steel, polymer and glass fibre reinforced concrete based on the notched beam test.“ Indian Concrete Journal, ,92(2), 35-50 |
ScJ84. |
Stephen S.J., Gettu R., Ferreira L.E.T., and Jose S. (2018). “Assessment of the toughness of fibre-reinforced concrete using the R-curve approach.“ Sadhana - Academy Proceedings in Engineering Sciences, ,43(3), 46 |
ScJ83. |
Sirajuddin M., and Gettu R. (2018). “Plastic shrinkage cracking of concrete incorporating mineral admixtures and its mitigation.“ Materials and Structures/Materiaux et Constructions, ,51(2), 48 |
ScJ82. |
Gopinath S., Gettu R., and Iyer N.R. (2018). “Influence of prestressing the textile on the tensile behaviour of textile reinforced concrete.“ Materials and Structures/Materiaux et Constructions, ,51(3), 64 |
ScJ81. |
Dhanya B.S., Santhanam M., Gettu R., and Pillai R.G. (2018). “Performance evaluation of concretes having different supplementary cementitious material dosages belonging to different strength ranges.“ Construction and Building Materials, ,187, 984-995 |
ScJ80. |
Gettu R., Pillai R.G., Santhanam M., Basavaraj A.S., Rathnarajan S., and Dhanya B.S. (2018). “Sustainability-based decision support framework for choosing concrete mixture proportions.“ Materials and Structures/Materiaux et Constructions, ,51(6), 165 |
ScJ79. |
Garcia-Ãlvarez V.O., Gettu R., and Carol I. (2017). “Determination of the energy release rate function for an eccentrically notched center-loaded beam using elastic fracture analysis.“ Journal of Structural Engineering (India), ,44(1), 88-94 |
ScJ78. |
Nayar S.K., and Gettu R. (2017). “Design methodology for fibre reinforced concrete slabs-on-grade based on inelastic analysis.“ Indian Concrete Journal, ,91(3), 26-36 |
ScJ77. |
Sangoju B., Gettu R., and Bharatkumar B.H. (2017). “Study of the parameters governing the chloride induced corrosion of reinforcement steel in cracked concrete.“ Indian Concrete Journal, ,91(3), 37-48 |
ScJ76. |
Padmanabhan V.C., and Gettu R. (2016). “Study of the efficiency of spray-on curing compounds.“ Indian Concrete Journal, ,90(2), 64-69 |
ScJ75. |
Gopinath S., Iyer N.R., and Gettu R. (2016). “Finite element analysis of RC beams strengthened with textile reinforced concrete.“ Journal of Structural Engineering (India), ,43(5), 454-460 |
ScJ74. |
Ramesh G., Gettu R., and Bharatkumar B.H. (2016). “Modified split disk test for characterization of FRP composites.“ Journal of Structural Engineering (India), ,43(5), 477-487 |
ScJ73. |
Nair P.S., and Gettu R. (2016). “Commercially available waterproofing agents in India - A review.“ Indian Concrete Journal, ,90(5), 36-53 |
ScJ72. |
Nayar S.K, and Gettu R (2016). “Benefits of using amorphous metallic fibres in concrete slabs‐on‐grade .“ RILEM Technical Letters, 1 |
ScJ71. |
Karmugil B, and Gettu R (2015). “Experimental study of the flow behaviour of superplasticized pastes with cement-calcined clay-limestone blends .“ RILEM Bookseries, 10 |
ScJ70. |
Nayar S.K., and Gettu R. (2015). “Synergy in toughness by incorporating amorphous metal and steel fibers.“ ACI Materials Journal, ,112(6), 821-827 |
ScJ69. |
Sangoju B., Pillai R.G., Gettu R., Bharatkumar B.H., and Iyer N.R. (2015). “Use of portland pozzolana cement to enhance the service life of reinforced concrete exposed to chloride attack.“ Journal of Materials in Civil Engineering, ,27(11), 4015031 |
ScJ68. |
Sangoju B., Bharatkumar B.H., Gettu R., Srinivasan P., Ramanjaneyulu K., and Iyer N.R. (2015). “Influence of PCE-SP and calcium nitrite inhibitor on mechanical and durability parameters of concrete.“ Journal of Scientific and Industrial Research, ,74(2), 82-87 |
ScJ67. |
Narasimhulu K, Gettu R, and Ganesh Babu K (2014). “Beneficiation of natural zeolite through flash calcination for its use as a mineral admixture in concrete .“ Journal of Materials in Civil Engineering, 26 |
ScJ66. |
Ponmalar V., and Gettu R. (2014). “Durability Studies on Confined Concrete using Fiber Reinforced Polymer.“ Journal of The Institution of Engineers (India): Series A, ,95(2), 91-96 |
ScJ65. |
Nayar S.K., Gettu R., and Krishnan S. (2014). “Characterisation of the toughness of fibre reinforced concrete - Revisited in the Indian context.“ Indian Concrete Journal, ,88(2), 8-23 |
ScJ64. |
John E., and Gettu R. (2014). “Effect of temperature on flow properties of superplasticized cement paste.“ ACI Materials Journal, ,111(1), 67-76 |
ScJ63. |
Ponmalar V., Ganesh Babu K., and Gettu R. (2014). “Theoretical modelling of the confinement effect on concrete with fiber reinforced polymer (FRP).“ Journal of Structural Engineering (India), ,40(6), 605-613 |
ScJ62. |
Narasimhulu K., Gettu R., and Ganesh Babu K. (2014). “Beneficiation of natural zeolite through flash calcination for its use as a mineral admixture in concrete.“ Journal of Materials in Civil Engineering, ,26(1), 24-33 |
ScJ61. |
Sivaprakasam M., Gettu R., Varghese K., and Vijaykumar T. (2013). “Study of possible productivity improvement in the fabrication of tunnel lining segments for a hydropower project.“ Indian Concrete Journal, ,87(6), 27-38 |
ScJ60. |
Bhaskar S., Gettu R., Bharatkumar B.H., and Neelamegam M. (2012). “Strength, bond and durability related properties of concretes with mineral admixtures.“ Indian Concrete Journal, ,86(2), 9-16 |
ScJ59. |
Víctor Óscar García-Álvarez, Gettu R., and Carol I. (2012). “Analysis of mixed-mode fracture in concrete using interface elements and a cohesive crack model.“ Sadhana - Academy Proceedings in Engineering Sciences, ,37(1), 187-205 |
ScJ58. |
Jayasree C, Santhanam M, and Gettu R (2011). “Cement-superplasticiser compatibility - Issues and challenges .“ Indian Concrete Journal, 85 |
ScJ57. |
Bhaskar S., Gettu R., Bharatkumar B.H., and Neelamegam M. (2011). “Studies on chloride induced corrosion of reinforcement steel in cracked concrete.“ SDHM Structural Durability and Health Monitoring, ,7(4), 231-251 |
ScJ56. |
Sangoju B., Gettu R., Bharatkumar B. H., and Neelamegam M. (2011). “Chloride-induced corrosion of steel in cracked opc and ppc concretes: Experimental study.“ Journal of Materials in Civil Engineering, ,23(7), 1057-1066 |
ScJ55. |
Jayasree C., Santhanam M., and Gettu R. (2011). “Cement-superplasticiser compatibility - Issues and challenges.“ Indian Concrete Journal, ,85(7), 48-60 |
ScJ54. |
Jayasree C., Krishnan J.M., and Gettu R. (2011). “Influence of superplasticizer on the non-Newtonian characteristics of cement paste.“ Materials and Structures/Materiaux et Constructions, ,44(5), 929-942 |
ScJ53. |
Santhanam M., Venkatachalapathy V., Sivathanupillai C., and Gettu R. (2010). “Mechanical properties of high density concrete used in fast reactors for structural and shielding purposes.“ Journal of the Institution of Engineers (India): Civil Engineering Division, ,91, 15-22 |
ScJ52. |
Bhaskar S., Bharatkumar B.H., Gettu R., and Neelamegam M. (2010). “Effect of corrosion on the bond behaviour of OPC and PPC concretes.“ Journal of Structural Engineering (Madras), ,37(1), 37-42 |
ScJ51. |
Aire C., Gettu R., Casas J.R., Marques S., and Marques D. (2010). “Concrete laterally confined with fibre-reinforced polymers (FRP): Experimental study and theoretical model [Estudio experimental y modelo teórico del hormigón confinado lateralmente con polÃmeros reforzados con fibras (FRP)].“ Materiales de Construccion, ,60(297), 19-31 |
ScJ50. |
Jayasree C., and Gettu R. (2010). “Correlating properties of paste, mortar and concrete.“ Indian Concrete Journal, ,84(7), 7-18 |
ScJ49. |
de la Cruz C.J., Turmo J., Gettu R., Barragán B, and Ramos G. (2009). “Beam Shear Test of Structural Self-Compacting Concrete [Ensayos a cortante de vigas de hormigón estructural autocompactable].“ DYNA (Colombia), ,76(159), 35-41 |
ScJ48. |
Mora-Ruacho J., Gettu R., and Aguado A. (2009). “Influence of shrinkage-reducing admixtures on the reduction of plastic shrinkage cracking in concrete.“ Cement and Concrete Research, ,39(3), 141-146 |
ScJ47. |
Gettu R., Shareef S.N., and Ernest K.J.D. (2009). “Evaluation of the robustness of SCC.“ Indian Concrete Journal, ,83(6), 13-19 |
ScJ46. |
Zerbino R., Barragán, B, Garcia T., Agulló, L, and Gettu R. (2009). “Workability tests and rheological parameters in self-compacting concrete.“ Materials and Structures/Materiaux et Constructions, ,42(7), 947-960 |
ScJ45. |
Jayasree C., and Gettu R. (2008). “Experimental study of the flow behaviour of superplasticized cement paste.“ Materials and Structures/Materiaux et Constructions, ,41(9), 1581-1593 |
ScJ44. |
Turmo J., Banthia N., Gettu R., and Barragán, B (2008). “Study of the shear behaviour of fibre reinforced concrete beams [Estudio del comportamiento a cortante de vigas de hormigón reforzado con fibras].“ Materiales de Construccion, ,58(292), 5-13 |
ScJ43. |
de Oliveira e Sousa J.L.A., and Gettu R. (2006). “Determining the tensile stress-crack opening curve of concrete by inverse analysis.“ Journal of Engineering Mechanics, ,132(2), 141-148 |
ScJ42. |
Barragán, B, Gettu R., Agulló, L, and Zerbino R. (2006). “Shear failure of steel fiber-reinforced concrete based on push-off tests.“ ACI Materials Journal, ,103(4), 251-257 |
ScJ41. |
Sena Cruz J.M., Barros J.A.O., Gettu R., and Azevedo Ã.F.M. (2006). “Bond behavior of near-surface mounted CFRP laminate strips under monotonic and cyclic loading.“ Journal of Composites for Construction, ,10(4), 295-303 |
ScJ40. |
Zerbino R.L., Giaccio G., and Gettu R. (2006). “Pseudo-ductile behaviour of steel fibre reinforced high-strength concretes.“ Indian Concrete Journal, ,80(2), 37-43 |
ScJ39. |
Gettu R., Gardner D.R., SaldÃvar H., and Barragán B (2005). “Study of the distribution and orientation of fibers in SFRC specimens.“ Materials and Structures/Materiaux et Constructions, ,38(275), 31-37 |
ScJ38. |
Bažant, Z.P, Gettu R., Jirásek, M, Barr B.I.G., Carol I., Carpinteri A., Elices M., Huet C., Mihashi H., Nemati K.M., Planas J., Ulm F.-J., Van Mier J.G.M., Van Vliet M.R.A., Burtscher S., Chiaia B., Dempsey J.P., Ferro G., Gopalaratnam V.S., Prat P., Rokugo K., Saouma V.E., Slowik V., Vitek L., and Willam K. (2004). “RILEM TC QFS Quasibrittle fracture scaling and size effect – Final report..“ Materials and Structures/Materiaux et Constructions, ,37(272), 547-568 |
ScJ37. |
Zerbino R.L., Gettu R., Fite L.A., and De Cea A.A. (2003). “Criteria and alternatives for evaluating the tenacity of steel fibre reinforced concrete [Criterios y alternativas para la evaluación de la tenacidad en hormigones con fibras de acero].“ Revista de Obras Publicas, ,150(3435), 23-30 |
ScJ36. |
Barr B.I.G., Lee M.K., Barragán B , Dupont D., Gettu R., Olesen J.F., Stang H., and Vandewalle L. (2003). “Round-robin analysis of the RILEM TC 162-TDF uni-axial tensile test: Part 2.“ Materials and Structures/Materiaux et Constructions, ,36(258), 275-280 |
ScJ35. |
Barr B.I.G., Lee M.K., Barragán, B.E, Dupont D., Gettu R., Olesen J.F., Stang H., and Vandewalle L. (2003). “Round-robin analysis of the RILEM TC 162-TDF uni-axial tensile test: Part 1.“ Materials and Structures/Materiaux et Constructions, ,36(258), 265-274 |
ScJ34. |
Vandewalle L., Nemegeer D., Balazs L., Barr B., Bartos P., Banthia N., Brandt A., Criswell M., Denarie E., Di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., Häusler V., Katsaragakis E., Kooitnan A., Kovler K., Lehtonen J., Massicotte B., Mindess S., Reinhardt H., Rossi P., Schaerlaekens S., Schnütgen B., Shah S., Skarendahl A., Stang H., Stroeven P., Swamy R., Tatnall P., Teutsch M., Walraven J., and Wubs A. (2003). “RILEM TC 162-TDF: 'Test and design methods for steel fibre reinforced concrete' σ-ε-design method .“ Materials and Structures, 36 |
ScJ33. |
Barragán B , Gettu R., Martín, M.A, and Zerbino R.L. (2003). “Uniaxial tension test for steel fibre reinforced concrete - A parametric study.“ Cement and Concrete Composites, ,25(7), 767-777 |
ScJ32. |
Roncero J., Gettu R., Agulló L, and Vázquez E. (2002). “Flow behaviour of superplasticised cement pastes: Influence of silica fume.“ Indian Concrete Journal, ,76(1), 31-35 |
ScJ31. |
Vandewalle L, Nemegeer D., Balazs L., Barr B., Barros J., Bartos P., Banthia N., Brandt A., Criswell M., Denarié F., Di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., Haüsler V., Katsaragakis F., Kooiman A., Kovler K., Lehtonen J., Massicotte B., Mindess S., Reinhardt H., Rossi P., Schaerlaekens S., Schumacher P., Schnütgen B., Shah S., Skarendahl Å., Stang H., Stroeven P., Swamy R., Tatnall P., Teutsch M., Walraven J., and Wubs A. (2002). “Design of steel fibre reinforced concrete using the σ-w method: Principles and applications .“ Materials and Structures, 35 |
ScJ30. |
Vandewalle L., Nemegeer D., Balazs L., Barr B., Barros J., Bartos P., Banthia N., Criswell M., Denarié F., Di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., Haüsler V., Kooiman A., Kovler K., Massicotte B., Mindess S., Reinhardt H., Rossi P., Schaerlaekens S., Schumacher P., Schnütgen B., Shah S., Skarendahl Å., Stang H., Stroeven P., Swamy R., Tatnall P., Teutsch M., and Walraven J. (2002). “Rilem TC 162-TDF: Test and design methods for steel fibre reinforced concrete - Bending test.“ Materials and Structures, 35 |
ScJ29. |
Roncero J, Valls S, and Gettu R (2002). “Study of the influence of superplasticizers on the hydration of cement paste using nuclear magnetic resonance and X-ray diffraction techniques .“ Cement and Concrete Research, 32 |
ScJ28. |
Roncero J., Valls S., and Gettu R. (2002). “Study of the influence of superplasticizers on the hydration of cement paste using nuclear magnetic resonance and X-ray diffraction techniques.“ Cement and Concrete Research, ,32(1), 103-108 |
ScJ27. |
Gettu R., and Mailvaganam N.P. (2002). “Effective use of chemical admixtures.“ Indian Concrete Journal, ,76, 527-528 |
ScJ26. |
Gettu R., Roncero J., and Martin M.A. (2002). “Long-term behaviour of concrete incorporating a shrinkage-reducing admixture.“ Indian Concrete Journal, ,76, 586-592 |
ScJ24. |
Bažant, Z.P, Rajapakse Y.D.S., Allen D.H., Ballarini R., Espinosa H.D., Gao H., Gettu R., Jirásek, M, Pijaudier-Cabot G., Planas J., and Ulm F.J. (2002). “Report on ONR Workshop on Fracture Scaling..“ International Journal of Fracture, ,113(4), 345-366 |
ScJ23. |
Ferreira L.E.T., Bittencourt T.N., Sousa J.L.A.O., and Gettu R. (2002). “R-curve behavior in notched beam tests of rocks.“ Engineering Fracture Mechanics, ,69(17), 1845-1852 |
ScJ23. |
Sfer D., Carol I., Gettu R., and Etse G. (2002). “Study of the behavior of concrete under triaxial compression.“ Journal of Engineering Mechanics, ,128(2), 156-163 |
ScJ22. |
Vandewalle L., Nemegeer D., Balazs G.L., Barr B., Bartos P., Banthia N., Brandt A.M., Criswell M., Denarie F., di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., Hausler V., Katsaragafis F., Kooiman A., Kovler K., Lehtonen J., Massicotte B., Mindess S., Reinhardt H., Rossi P., Schaerlaekens S., Schnutgen B., Shah S., Skarendahl A., Stang H., Stroeven P., Swamy R., Tatnall P., Teutsch M., Walraven J., and Wubs A. (2001). “Rilem TC 162-TDF: Test and design methods for steel fibre reinforced concrete: Uni-axial tension test for steel fibre reinforced concrete.“ Materials and Structures/Materiaux et Constructions, ,34(235), 3-6 |
ScJ21. |
Mora J., Martin M.A., Gettu R., and Aguado A. (2001). “Study of plastic shrinkage cracking in concrete, and the influence of fibers and a shrinkage reducing admixture [Studio della fessurazione per ritiro plastico nel calcestruzzo e influenza delle fibre e di additivi per la riduzione del ritiro].“ Industria Italiana del Cemento, ,71(11), 828-837 |
ScJ20. |
Vandewalle L., Nemegeer D., Balazs G.L., Barr B., Bartos P., Banthia N., Brandt A.M., Criswell M., Denarie F., di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., Hausler V., Katsaragafis F., Kooiman A., Kovler K., Lehtonen J., Massicotte B., Mindess S., Reinhardt H., Rossi P., Schaerlaekens S., Schnutgen B., Shah S., Skarendahl A., Stang H., Stroeven P., Swamy R., Tatnall P., Teutsch M., Walraven J., and Wubs A. (2001). “Rilem TC 162-TDF: Test and design methods for steel fibre reinforced concrete: Uni-axial tension test for steel fibre reinforced concrete .“ Materials and Structures, 34 |
ScJ19. |
Vandewalle L., Nemegeer D., Balazs L., Barr B., Bartos P., Banthia N., Brandt A., Criswell M., Denarie E., Di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., and Hausler V. (2000). “Recommendations of RILEM TC 162-TDF: σ-ε design method.“ Materials and Structures/Materiaux et Constructions, ,33(236), 75-81 |
ScJ18. |
Vandewalle L., Nemegeer D., Balazs L., Barr B., Barros J., Banos P., Banthia N., Criswell M., Denarié E., Di Prisco M., Falkner H., Gettu R., Gopalaratnam V., Groth P., Haüsler V., Kooiman A., Kovler K., Massicotte B., Mindess S., Reinhardt H.-W., Rossi P., Schaerlaekens S., Schumacher I.P., Schnütgen B., Shah S., Skarendahl Å., Stang H., Stroeven P., Swamy R., Tatnall P., Teutsch M., Walraven J., and Wubs A. (2000). “σ-ε design method .“ Materials and Structures, 33 |
ScJ17. |
Shah S.P., Van Micr J.G.M., Banthia N., Bascoul A., Berthaud Y., Bittnar Z., Buyukozturk O., Carpinteri A., Elices M., Ferrara G., Gettu R., Gylltoft K., Hassanzadeh M., Hawkins N., Horii H., Karihaloo B.L., König, G, Kotsovos M., Labuz J., Markeset G., Reinharde H.W., Schom H., Stang H., Thienel K.Ch., and Ulfkjxr J.-P. (2000). “Test method for measurement of the strain-softening behaviour of concrete under uniaxial compression.“ Materials and Structures/Materiaux et Constructions, ,33(230), 347-351 |
ScJ16. |
Agulló, L, Toralles-Carbonari B., Gettu R., and Aguado A. (1999). “Fluidity of cement pastes with mineral admixtures and superplasticizer - A study based on the Marsh cone test.“ Materials and Structures/Materiaux et Constructions, ,32(7), 479-485 |
ScJ15. |
Gettu R., Saldívar, H, and Kazemi M.T. (1998). “Implications of the size effect method for analyzing the fracture of concrete..“ International Journal of Solids and Structures, ,35, 4121-4132 |
ScJ14. |
Torrents J.M., Roncero J., and Gettu R. (1998). “Utilization of impedance spectroscopy for studying the retarding effect of a superplasticizer on the setting of cement.“ Cement and Concrete Research, ,28(9), 1325-1333 |
ScJ13. |
Gettu R., Víctor Óscar García-Álvarez, and Aguado A. (1998). “Effect of aging on the fracture characteristics and brittleness of a high-strength concrete.“ Cement and Concrete Research, ,28(3), 349-355 |
ScJ12. |
Vilardell J., Aguado A., Agullo L., and Gettu R. (1998). “Estimation of the modulus of elasticity for dam concrete.“ Cement and Concrete Research, ,28(1), 93-101 |
ScJ11. |
Gettu R, Saldívar H, and Kazemi M.T (1998). “Implications of the size effect method for analyzing the fracture of concrete .“ International Journal of Solids and Structures, 35 |
ScJ10. |
Gettu R., Aguado A., and Oliveira M.O.F. (1996). “Damage in high-strength concrete due to monotonic and cyclic compression - A study based on splitting tensile strength.“ ACI Materials Journal, ,93(6), 519-523 |
ScJ9. |
Barr B., Gettu R., Al-Oraimi S.K.A., and Bryars L.S. (1996). “Toughness measurement - The need to think again.“ Cement and Concrete Composites, ,18, 281-297 |
ScJ8. |
Gettu Ravindra, Mobasher Barzin, Carmona Sergio, and Jansen Daniel C. (1996). “Testing of concrete under closed-loop control.“ Advanced Cement Based Materials, ,3(2), 54-71 |
ScJ7. |
Shah S.P, Aguado A, and Gettu R (1995). “International RILEM Workshop on Technology Transfer of the New Trends in Concrete (Contech '94) - Barcelona, Spain, 7-9 November 1994 .“ Materials and Structures, 28 |
ScJ6. |
Gettu R., Ariiio A., and Kazemi M.T. (1995). “Fracture mechanics and size effect of concrete in tension.“ Journal of Structural Engineering (United States), ,121(1), 151-153 |
ScJ5. |
Gopalaratnam V.S., and Gettu R. (1995). “On the characterization of flexural toughness in fiber reinforced concretes.“ Cement and Concrete Composites, ,17(3), 239-254 |
ScJ4. |
Shah S.P., Aguado A., and Gettu R. (1995). “International RILEM Workshop on Technology Transfer of the New Trends in Concrete (Contech '94) - Barcelona, Spain, 7-9 November 1994.“ Materials and Structures, ,28(3), 183-185 |
ScJ3. |
Bazant Zdenek P., and Gettu Ravindra (1992). “Rate effects and load relaxation in static fracture of concrete.“ ACI Materials Journal, ,89(5),457-468 |
ScJ2. |
Bažant Z.P., Gettu R., and Kazemi M.T. (1991). “Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves.“ International Journal of Rock Mechanics and Mining Sciences and, ,28(1), 43-51 |
ScJ1. |
Gettu Ravindra, Bazant Zdenek P., and Karr Martha E. (1990). “Fracture properties and brittleness of high-strength concrete.“ ACI Materials Journal, ,87(6), 608-618 |
Conferences |
Click on plus symbols ( ) |
Scopus Indexed Conferences |
ScC40. |
Khute S, Zerbino R, Singh S, and Gettu R (2023). “Assessment of Dispersion Potential of Discarded Coconut Fibres in Concrete Pavements .“ Lecture Notes in Civil Engineering |
ScC39. |
Stephen S.J, and Gettu R (2021). “Incorporation of Rate-Dependent Fracture Properties in the Design of Precast Concrete Tunnel Segment with Hybrid Reinforcement .“ RILEM Bookseries |
ScC38. |
Menéndez E, Imamoto K.-I, Gettu R, Noguchi T, and Hairon R (2020). “Analysis of Change of Physical Properties of Organic Repair Products due to Fire Exposition .“ Current Topics and Trends on Durability of Building Materials and Components - Proceedings of the 15th International Conference on Durability of Building Materials and Components, DBMC 2020 |
ScC37. |
Murugan K, Stephen S.J, and Gettu R (2020). “Influence of Fibre Geometry on the Fracture of Steel Fibre Reinforced Concrete .“ IOP Conference Series: Materials Science and Engineering |
ScC36. |
Kurup P., and Gettu R. (2019). “Value addition to athangudi tiles.“ Recent Advances in Materials, Mechanics and Management - Proceedings of the 3rd International Conference on Materials, Mechanics and Management, IMMM 2017 |
ScC35. |
Gettu R., Pillai R.G., Santhanam M., Rathnarajan S., Basavaraj A.S., Rengaraju S., and Yuvaraj D. (2018). “Service life and life-cycle assessment of reinforced concrete with fly ash and limestone calcined clay cement.“ 6th International Conference on Durability of Concrete Structures, ICDCS 2018 |
ScC34. |
Gettu R., Pillai R.G., Meena J., Basavaraj A.S., Santhanam M., and Dhanya B.S. (2018). “Considerations of sustainability in the mixture proportioning of concrete for strength and durability.“ American Concrete Institute, ACI Special Publication |
ScC33. |
Ferrara L, Caggiano A, Di Luzio G, Etse G, Gettu R, Krelani V, Ferreira S.R, Flores M.R, Serna P, and Toledo Filho R.D (2016). “Five years of international collaborative research on self-healing capacity of cementitious composites .“ fib Symposium |
ScC32. |
Rani S.D., Deb M., Santhanam M., and Gettu R. (2016). “Evaluation of repair mortar materials for old monuments in Southern India.“ Proceedings of the 4th International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2015 |
ScC31. |
Gettu R., Patel A., Rathi V., Prakasan S., Basavaraj A.S., and Maity S. (2016). “Sustainability assessment of cements and concretes in the Indian context: Influence of supplementary cementitious materials.“ Sustainable Construction Materials and Technologies |
ScC30. |
Sirajuddin M., and Gettu R. (2015). “Effect of the incorporation of mineral admixtures and shrinkage-mitigating ingredients on the plastic shrinkage of concrete.“ CONCREEP 2015: Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures - Proceedings of the 10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures |
ScC29. |
Ferrara L., Albertini I., Gettu R., Krelani V., Moscato S., Pirritano F., Flores M.R., Ros P.S., and Theeda S.M. (2015). “Self healing of cement based materials engineered through crystalline admixtures: Experimental results from a multinational university network.“ American Concrete Institute, ACI Special Publication |
ScC28. |
Nayar S.K., and Gettu R. (2014). “A design methodology for fibre reinforced concrete pavements and slabs-on-grade.“ Proceedings of the 10th fib International PhD Symposium in Civil Engineering |
ScC27. |
Nayar S.K., and Gettu R. (2014). “A comprehensive methodology for the design of fibre-reinforced concrete pavements.“ American Concrete Institute, ACI Special Publication |
ScC26. |
Dhanya B.S., Santhanam M., Pillai R.G., and Gettu R. (2014). “Evaluation of various electrical methods used to assess chloride transport in concrete.“ 4th International fib Congress 2014: Improving Performance of Concrete Structures, FIB 2014 - Proceedings |
ScC25. |
Sangoju B., Pillai R.G., Gettu R., Bharatkumar B.H., and Iyer N.R. (2013). “Influence of portland pozzolana cement on the service life of reinforced concrete under chloride attack.“ Sustainable Construction Materials and Technologies |
ScC24. |
Krishnan A, Nair P.S, and Gettu R (2012). “Effect of weathering on polymer modified cement mortars used for the repair and waterproofing of concrete .“ Concrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012 |
ScC23. |
Krishnan A., Nair P.S., and Gettu R. (2012). “Effect of weathering on polymer modified cement mortars used for the repair and waterproofing of concrete.“ Concrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012 |
ScC22. |
Gopinath S., Iyer N.R., Gettu R., Palani G.S., and Murthy A.R. (2011). “Confinement effect of glass fabrics bonded with cementitious and organic binders.“ Procedia Engineering |
ScC21. |
De Oliveira e Sousa J.L.A., and Gettu R. (2005). “Obtaining the constitutive tensile relation of concrete through inverse analysis.“ 11th International Conference on Fracture 2005, ICF11 |
ScC20. |
Gettu R., and Roncero J. (2005). “On the long term response of concrete with a shrinkage reducing admixture.“ Proceedings of the International Conference on Admixtures - Enhancing Concrete Performance |
ScC19. |
Aire C., Gettu R., and Casas J.R. (2005). “Axially loaded concrete-filled steel tubes [Tubos de acero rellenos de hormigon cargados axialmente].“ Structural Concrete and Time - Proceedings of the fib Symposium |
ScC18. |
Josa A., Gettu R., and Aguado A. (2005). “Environmental assessment of cement based products: Life cycle assessment and the ecoconcrete software tool.“ Proceedings of the International Conference on Achieving Sustainability in Construction |
ScC17. |
Barragan B, Gettu R, De La Cruz C, Bravo M, and Zerbino R (2005). “Development and application of fibre-reinforced self-compacting concrete .“ Proceedings of the International Conference on Young Researchers' Forum |
ScC16. |
Barragán B., Zerbino R., Gettu R., De La Cruz C., and Bravo M. (2005). “Durability properties of self-compacting concrete for thin walls [Propiedades de durabilidad de muros delgados de hormigon autocompact able].“ Structural Concrete and Time - Proceedings of the fib Symposium |
ScC15. |
Gettu R., Zerbino R.L., Barragán B, Bernad C., Bravo M., and Cruz C. (2005). “Development of self compacting concrete for prefabricated street furniture.“ Proceedings of the International Conference on Achieving Sustainability in Construction |
ScC14. |
Gettu R, Gomes P.C.C, Aguila L, and Josa A (2004). “High-strength self-compacting concrete with fly ash: Development and utilization .“ American Concrete Institute, ACI Special Publication |
ScC13. |
Mora J., Aguado A., and Gettu R. (2003). “The influence of shrinkage reducing admixtures on plastic shrinkage [Influencia de los aditivos reductores de retracción sobre la retracción plástica].“ Materiales de Construccion |
ScC12. |
Etse G, Sfer D, Carol I, Gettu R, and Willam K (2002). “Dilatational response of concrete materials: Facts and fiction .“ American Concrete Institute, ACI Special Publication |
ScC11. |
Barragán B.E, Gettu R, and Zerbino R (2002). “Tensile behavior of steel fiber reinforced concrete - Evaluation of a test methodology .“ American Concrete Institute, ACI Special Publication |
ScC10. |
Víctor Óscar García-Álvarez , Gettu R., and Carol I. (2000). “Numerical analysis of mixed mode fracture in concrete using interface elements.“ European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000 |
ScC9. |
Etse G., Sfer D., Carol I., and Gettu R. (2000). “Failure analysis of concrete under multiaxial stress state.“ European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000 |
ScC8. |
Casas J.R, Gettu R, Agulló L, Toralles-Carbonari B, and (2000). “Strength of high-performance concrete in columns-factors and effect of placing method .“ American Concrete Institute, ACI Special Publication |
ScC7. |
Roncero J, Gettu R, Gomes P.C.C, and Agullo L (2000). “Study of flow behavior of superplasticized cement paste systems and its influence on properties of fresh concrete .“ American Concrete Institute, ACI Special Publication |
ScC6. |
Gettu Ravindra, Carol Ignacio, and Prat Pere C. (1996). “Some phenomenological aspects of high performance concretes, and their consequences for numerical analysis.“ Structures Congress - Proceedings |
ScC5. |
Gettu Ravindra, Ouyang Chengsheng, and Shah Surendra P. (1991). “Fracture mechanics of concrete. A review.“ |
ScC4. |
Bazant Zdenek P., and Gettu Ravindra (1991). “Size effects in the fracture of quasi-brittle materials.“ Cold Regions Engineering |
ScC3. |
Bazant Zdenek P., and Gettu Ravindra (1990). “Size effect in concrete structures and influence of loading rate.“ |
ScC2. |
Gettu Ravindra, Bazant Zdenek P., and Karr Martha E. (1990). “Brittleness of high strength concrete.“ |
ScC1. |
Bazant Z.P., Cedolin L., and Gettu R. (1988). “Stable paths and states of irreversible structural systems: Thermodynamic analysis and implications for composites.“ American Society of Mechanical Engineers, Aerospace Division (Publication) AD |