ScJ55.

Chakkoth U., Krishna K.R., Ramkumar M., Hussain S.A., Rao P.V.C., Choudary N.V., Sriganesh G., and Krishnan J.M. (2020). “Component blending for bitumen production for Indian refineries.“ Sadhana - Academy Proceedings in Engineering Sciences, 45

ScJ54.

Nivitha M.R., and Murali Krishnan J. (2020). “Rheological characterisation of unmodified and modified bitumen in the 90–200°C temperature regime.“ Road Materials and Pavement Design, 21

ScJ53.

Dokku B., Savio D., Nivitha M.R., Krishnan J.M., and Prof. (2020). “Development of Rutting Model for Indian Highways Based on Rut Depth Simulations from AASHTOWare Pavement ME Design Software.“ Journal of Transportation Engineering Part B: Pavements, 146

ScJ52.

Nivitha M.R., Krishnan J.M., and Rajagopal K.R. (2020). “Viscoelastic transitions exhibited by modified and unmodified bitumen.“ International Journal of Pavement Engineering, 21

ScJ51.

Savio D., Nivitha M.R., and Krishnan J.M. (2019). “Influence of climate and traffic on the HMA rut-depth for India.“ International Journal of Pavement Research and Technology, 12

ScJ50.

Ayyar P., Lakshmi S., Padmarekha A., and Krishnan J.M. (2019). “Influence of Rest Period on the Fatigue Response of Bituminous Mixture at Low Temperature.“ International Journal of Pavement Research and Technology, 12

ScJ49.

Kumar T.A., Sandeep I.J.S., Nivitha M.R., Chowdary V., and Krishnan J.M. (2019). “Quantification of Aging Compounds in Evotherm-Modified Warm-Mix Asphalt Binder Using Fourier Transform Infrared Spectroscopy.“ Arabian Journal for Science and Engineering, 44

ScJ48.

Deepa S., Saravanan U., and Murali Krishnan J. (2019). “On measurement of dynamic modulus for bituminous mixtures.“ International Journal of Pavement Engineering, 20

ScJ47.

Padmarekha A., Divya P.S., and Murali Krishnan J. (2019). “Discussion of .“ Journal of Materials in Civil Engineering, 31

ScJ46.

Roja K.L., Padmarekha A., and Krishnan J.M. (2019). “Influence of warm mix additive and loading rate on rutting of warm mix asphalt pavement.“ International Journal of Pavement Engineering, 20

ScJ45.

Nivitha M.R., Prasad E., and Krishnan J.M. (2019). “Transitions in unmodified and modified bitumen using FTIR spectroscopy.“ Materials and Structures/Materiaux et Constructions, 52

ScJ44.

Raj A., and Krishnan J.M. (2018). “Influence of gauge length on the measurement of resilient modulus of bituminous mixtures.“ International Journal of Engineering and Advanced Technology, 8

ScJ43.

Nagula S.S., Robinson R.G., and Krishnan J.M. (2018). “Mechanical characterization of pavement granular materials using hardening soil model.“ International Journal of Geomechanics, 18

ScJ42.

Nivitha M.R., Narayan S.P.A., and Krishnan J.M. (2018). “Non-linear viscoelastic model based ranking of modified binders for their rutting performance.“ Materials and Structures/Materiaux et Constructions, 51

ScJ41.

Lakshmi Roja K., Padmarekha A., and Krishnan J.M. (2018). “Rheological investigations on warm mix asphalt binders at high and intermediate temperature ranges.“ Journal of Materials in Civil Engineering, 30

ScJ40.

Nivedya M.K., Veeraragavan A., Ravindran P., and Krishnan J.M. (2018). “Investigation on the influence of air voids and active filler on the mechanical response of bitumen stabilized material.“ Journal of Materials in Civil Engineering, 30

ScJ39.

Atul Narayan S.P., Murali Krishnan J., Little D.N., and Rajagopal K.R. (2017). “Mechanical behaviour of asphalt binders at high temperatures and specification for rutting.“ International Journal of Pavement Engineering, 18

ScJ38.

Varma R.K., Padmarekha A., Ravindran P., Bahia H.U., and Krishnan J.M. (2017). “Evolution of energy dissipation during four-point bending of bituminous mixtures.“ Road Materials and Pavement Design, 18

ScJ37.

Nivedya M.K., Murru P.T., Veeraragavan A., and Krishnan J.M. (2017). “Estimation of dynamic modulus of Bitumen Stabilized Mixes.“ Construction and Building Materials, 136

ScJ36.

Lakshmi Roja K., Roy N., and Krishnan J.M. (2016). “Influence of aging on the rheological behavior of warm mix asphalt binders.“ RILEM Bookseries, 11

ScJ35.

Nivitha M.R., Prasad E., and Krishnan J.M. (2016). “Ageing in modified bitumen using FTIR spectroscopy.“ International Journal of Pavement Engineering, 17

ScJ34.

Nivedya M.K., Ravindran P., and Murali Krishnan J. (2016). “Experimental investigations and constitutive modeling of bitumen stabilized mixtures.“ International Journal of Engineering Science, 102

ScJ33.

Roy N., Veeraragavan A., and Krishnan J.M. (2016). “Influence of confinement pressure and air voids on the repeated creep and recovery of asphalt concrete mixtures.“ International Journal of Pavement Engineering, 17

ScJ32.

Roy N., Veeraragavan A., and Murali Krishnan J. (2015). “Interpretation of flow number test data for asphalt mixtures.“ Proceedings of the Institution of Civil Engineers: Transport, 168

ScJ31.

Nivitha M.R., and Krishnan J.M. (2014). “Development of Pavement Temperature Contours for India.“ Journal of The Institution of Engineers (India): Series A, 95

ScJ30.

Kumar S.A., Sarvanan U., Krishnan J.M., and Veeraragavan A. (2014). “Rheological characterisation of modified binders at mixing and compaction temperature.“ International Journal of Pavement Engineering, 15

ScJ29.

Padmarekha A., and Krishnan J.M. (2013). “Viscoelastic transition of unaged and aged asphalt.“ Journal of Materials in Civil Engineering, 25

ScJ28.

Roy N., Veeraragavan A., Jain P.K., and Murali Krishnan J. (2013). “A Re-look at the asphalt mixture performance test protocols and computational algorithms.“ Journal of Testing and Evaluation, 41

ScJ27.

Divya P.S., Gideon C.S., and Murali Krishnan J. (2013). “Influence of the type of binder and crumb rubber on the creep and recovery of crumb rubber modified bitumen.“ Journal of Materials in Civil Engineering, 25

ScJ26.

Padmarekha A., Chockalingam K., Saravanan U., Deshpande A.P., and Krishnan J.M. (2013). “Large amplitude oscillatory shear of unmodified and modified bitumen.“ Road Materials and Pavement Design, 14

ScJ25.

Reddy K.S., Umakanthan S., and Krishnan J.M. (2012). “Constant strain rate experiments and constitutive modeling for a class of bitumen.“ Mechanics of Time-Dependent Materials, 16

ScJ24.

Atul Narayan S.P., Venkata Nag K.A., Murali Krishnan J., Deshpande A.P., and Rajagopal K. (2012). “Nonlinear viscoelastic response of asphalt binders in transient tests.“ Road Materials and Pavement Design, 13

ScJ23.

Narayan S.P.A., Krishnan J.M., Deshpande A.P., and Rajagopal K.R. (2012). “Nonlinear viscoelastic response of asphalt binders: An experimental study of the relaxation of torque and normal force in torsion.“ Mechanics Research Communications, 43

ScJ22.

Gideon C.S., and Murali Krishnan J. (2012). “Influence of horizontal traction on top-down cracking in asphalt pavements.“ RILEM Bookseries, 4

ScJ21.

Padma Rekha A., and Murali Krishnan J. (2011). “Experimental investigations on high temperature transition of asphalt.“ Construction and Building Materials, 25

ScJ20.

Jayasree C., Krishnan J.M., and Gettu R. (2011). “Influence of superplasticizer on the non-Newtonian characteristics of cement paste.“ Materials and Structures/Materiaux et Constructions, 44

ScJ19.

Chockalingam K., Saravanan U., and Murali Krishnan J. (2010). “Characterization of petroleum pitch using steady shear experiments.“ International Journal of Engineering Science, 48

ScJ18.

Chowdary V., and Murali Krishnan J. (2010). “A thermodynamic framework for modelling healing of asphalt mixtures.“ International Journal of Pavement Research and Technology, 3

ScJ17.

Rajan N.K., Selvavathi V., Sairam B., and Krishnan J.M. (2010). “Influence of asphaltenes on the rheological properties of blended paving asphalts.“ Petroleum Science and Technology, 28

ScJ16.

Ravindran P., Krishnan J.M., Masad E., and Rajagopal K.R. (2009). “Modelling sand-asphalt mixtures within a thermodynamic framework: Theory and application to torsion experiments.“ International Journal of Pavement Engineering, 10

ScJ15.

Rajan N.K., Selvavathi V., Sairam B., and Krishnan J.M. (2008). “Rheological characterization of blended paving asphalt.“ Road Materials and Pavement Design, 9

ScJ14.

Rajan N.K., Krishnan J.M., Selvavathi V., and Sairam B. (2008). “Rheological characterization of blended paving asphalt.“ Road Materials and Pavement Design, 9

ScJ13.

Ravindran P., Murali Krishnan J., and Rajagopal K.R. (2007). “Characterization of the non-linear response of asphalt mixtures using a torsional rheometer.“ Mechanics Research Communications, 34

ScJ12.

Ravindran P., Rajagopal K.R., Krishnan J.M., and Little D.N. (2007). “An experimental investigation into the influence of fillers on the development of normal stresses and stress relaxation in asphalt mixtures due to torsion.“ Particulate Science and Technology, 25

ScJ11.

Krishnan J.M., Rajagopal K.R., and Little D.N. (2006). “Rate-type model for bituminous mixtures and its application to sand asphalt.“ Journal of Engineering Mechanics, 132

ScJ10.

Krishnan J.M., Rajagopal K.R., Masad E., and Little D.N. (2006). “Thermomechanical framework for the constitutive modeling of asphalt concrete.“ International Journal of Geomechanics, 6

ScJ9.

Pradeep H., Murali Krishnan J., Rajagopal K.R., Little D.N., and Masad E. (2005). “Modelling constant displacement rate experiments of asphalt concrete using a thermodynamic framework.“ International Journal of Pavement Engineering, 6

ScJ8.

Krishnan J.M., and Rajagopal K.R. (2005). “On the mechanical behavior of asphalt.“ Mechanics of Materials, 37

ScJ7.

Kasula L.R., Murali Krishnan J., Rajagopal K.R., and Little D.N. (2005). “Normal stress and stress relaxation data for sand asphalt undergoing torsional flow.“ Mechanics Research Communications, 32

ScJ6.

Ravindran P., Krishnan J.M., and Rajagopal K.R. (2004). “A note on the flow of a Burgers' fluid in an orthogonal rheometer.“ International Journal of Engineering Science, 42

ScJ5.

Krishnan J.M., and Rajagopal K.R. (2004). “Triaxial testing and stress relaxation of asphalt concrete.“ Mechanics of Materials, 36

ScJ4.

Murali Krishnan J., and Rajagopal K.R. (2004). “Thermodynamic framework for the constitutive modeling of asphalt concrete: Theory and applications.“ Journal of Materials in Civil Engineering, 16

ScJ3.

Krishnan J.M., and Rajagopal K.R. (2003). “Review of the uses and modeling of bitumen from ancient to modern times.“ Applied Mechanics Reviews, 56

ScJ2.

Murali Krishnan J., and Lakshmana Rao C. (2001). “Permeability and bleeding of asphalt concrete using mixture theory.“ International Journal of Engineering Science, 39

ScJ1.

Murali Krishnan J., and Lakshmana Rao C. (2000). “Mechanics of air voids reduction of asphalt concrete using mixture theory.“ International Journal of Engineering Science, 38

ScC33.

Savio D., Kavinmathi K., Krishnan J.M., and Subramanian S.C. (2019). “Influence of truck acceleration on dynamic load transfer to pavement.“ Airfield and Highway Pavements 2019: Design, Construction, Condition Evaluation, and Management of Pavements - Selected Papers from the International Airfield and Highway Pavements Conference 2019

ScC32.

Kavinmathi K., Narayan S.P.A., Krishnan J.M., and Subramanian S.C. (2018). “Investigation of dynamic vehicle loading due to roughness of pavement—a case study.“ Advances in Materials and Pavement Performance Prediction - Proceedings of the International AM3P Conference, 2018

ScC31.

Roja K.L., Divya P.S., Dhanya N., and Krishnan J.M. (2018). “Influence of dosage of warm mix additives on the rheological behavior of asphalt binders in the mixing and compaction temperature regime.“ Advances in Materials and Pavement Performance Prediction - Proceedings of the International AM3P Conference, 2018

ScC30.

Chakkoth U., Ravindran P., and Murali Krishnan J. (2017). “Influence of Viscosities of PDA Pitch and Flux on Blended Bitumen Viscosity.“ Airfield and Highway Pavements 2017: Testing and Characterization of Bound and Unbound Pavement Materials - Proceedings of the International Conference on Highway Pavements and Airfield Technology 2017, 2017-August

ScC29.

Nivitha M.R., and Murali Krishnan J. (2016). “Viscoelastic solid-fluid transition in bitumen using rheology and FTIR spectroscopy.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC28.

Lakshmi Roja K., and Murali Krishnan J. (2016). “Use of dissipated energy to quantify fatigue life of Warm Mix Asphalt.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC27.

Dokku B., and Murali Krishnan J. (2016). “Use of mechanistic-empirical pavement design guide for bituminous pavements in India.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC26.

Savio D., Paul P., and Murali Krishnan J. (2016). “Statistical analysis of axle load data and pavement damage for a few National Highways in India.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC25.

Sparsha N., Robinson R.G., and Murali Krishnan J. (2016). “Use of repeated load CBR test to characterize pavement granular materials.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC24.

Nivedya M.K., Veeraragavan A., and Murali Krishnan J. (2016). “How to characterize the mechanical response of Bitumen Stabilized Material?.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC23.

Deepa S., Saravanan U., and Murali Krishnan J. (2016). “Issues related to measurement of dynamic modulus of bituminous mixtures.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC22.

Remya Varma K., Murali Krishnan J., and Bahia H.U. (2016). “On the use of Normalised Modulus for estimation of fatigue life of asphalt mixtures.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC21.

Savio D., Paul P., and Murali Krishnan J. (2016). “Statistical Analysis of Axle Load Distributions in India.“ International Conference on Transportation and Development 2016: Projects and Practices for Prosperity - Proceedings of the 2016 International Conference on Transportation and Development

ScC20.

Savio D., Nivitha M.R., Bindhu B.K., and Krishnan J.M. (2016). “Overloading Analysis of Bituminous Pavements in India Using M-E PDG.“ Transportation Research Procedia, 17

ScC19.

Varma K.R., Padmarekha A., Anjaneyulu M.V.L.R., and Krishnan J.M. (2016). “Influence of Post - Processing Methods for Ranking of Fatigue Life of Bituminous Mixture.“ Transportation Research Procedia, 17

ScC18.

Read J., Airey G., Krishnan J.M., Tabatabaee N., and Sousa J. (2016). “AAPT/ISAP international forum: Bitumen: Current situation and future challenges.“ Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, 85

ScC17.

Krishnan J.M. (2014). “AAPT/ISAP International forum: Recent advances in pavement engineering in India.“ Asphalt Paving Technology, AAPT, 83

ScC16.

Reashma P.S., Nivitha M.R., Veeraragavan A., and Krishnan J.M. (2014). “AAPT/ISAP international forum: Development of unmodified binder specifications for India.“ Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, 83

ScC15.

Tejaswi P., Fatima J., Padmarekha A., and Krishnan J.M. (2013). “Linear viscoelastic limits for determination of dynamic modulus of bituminous concrete mixture in AMPT.“ Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements - Proceedings of the 2013 Airfield and Highway Pavement Conference

ScC14.

Nivedya M.K., Roja K.L., Veeraragavan A., and Krishnan J.M. (2013). “Rheological investigations on foamed bitumen.“ Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements - Proceedings of the 2013 Airfield and Highway Pavement Conference

ScC13.

Nivitha M.R., Jayasree C., and Krishnan J.M. (2013). “Viscoelastic - Non-Newtonian transitory response of cement paste and superplasticizer combinations.“ Sustainable Construction Materials and Technologies, 2013-August

ScC12.

Nivitha M.R., and Krishnan J.M. (2012). “Development of binder selection strategies for asphalt pavements for India.“ 7th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, MAIREPAV 2012

ScC11.

Roy N., Krishnan J.M., and Veeraragavan A. (2012). “Effect of confinement pressure on creep and recovery response of asphalt concrete mixtures.“ 7th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, MAIREPAV 2012

ScC10.

Reashma P.S., Reddy K.S., Veeraragavan A., and Krishnan J.M. (2012). “Dynamic mechanical analysis of bitumen processed in India.“ 7th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, MAIREPAV 2012

ScC9.

Padmarekha A., and Krishnan J.M. (2011). “Study on frequency dependency of sol-gel transition of asphalt.“ T and DI Congress 2011: Integrated Transportation and Development for a Better Tomorrow - Proceedings of the 1st Congress of the Transportation and Development Institute of ASCE

ScC8.

Kumar S.A., Alagappan P., Krishnan J.M., and Veeraragavan A. (2011). “Mechanical response of modified asphalt pavements.“ T and DI Congress 2011: Integrated Transportation and Development for a Better Tomorrow - Proceedings of the 1st Congress of the Transportation and Development Institute of ASCE

ScC7.

Jeya S., and Krishnan J.M. (2008). “Stress relaxation behavior of asphalt emulsion residue.“ Efficient Transportation and Pavement Systems: Characterization, Mechanisms, Simulation, and Modeling - Proceedings of the 4th International Gulf Conference on Roads

ScC6.

Kumar S.A., Krishnan J.M., and Veeraragavan A. (2008). “Steady shear properties of a class of aged bitumens.“ Efficient Transportation and Pavement Systems: Characterization, Mechanisms, Simulation, and Modeling - Proceedings of the 4th International Gulf Conference on Roads

ScC5.

Chowdary V., Krishnan J.M., and Rengaraju V.R. (2006). “Laboratory investigation on healing of sand asphalt mixtures.“ Geotechnical Special Publication

ScC4.

Chowdary V., and Krishnan J.M. (2006). “Characterization of healing in sand Asphalt mixtures using a thermomechanical framework.“ Proceedings of the 2006 Airfield and Highway Pavement Specialty Conference, 2006

ScC3.

Murali Krishnan J., and Rajagopal K.R. (2002). “Constitutive modeling of asphalt bound granular materials - Theoretical background.“ ASME International Mechanical Engineering Congress and Exposition, Proceedings

ScC2.

Murali Krishnan J., and Rajagopal K.R. (2002). “Constitutive modeling of asphalt bound granular materials - Applications to sand asphalt.“ ASME International Mechanical Engineering Congress and Exposition, Proceedings

ScC1.

Murali Krishnan J., and Rengaraju V.R. (1999). “Air voids reduction phenomena of asphalt concrete - A continuum approach.“ International Journal of Fracture, 97