ScJ119.

Mohan MK, Pillai RG, Santhanam M, and Gettu R (2021). “High performance cementitious grout with fly ash for corrosion protection of post-tensioned concrete structures.“ Construction and Building Materials, 281: 122612

ScJ118.

Y. Dhandapani, M. Santhanam, G. Kaladharan, and S. Ramanathan (2021). “Towards ternary binders involving limestone additions � a review.“ Cement and Concrete Research, 143: 106396

ScJ117.

Pratik Gujar, Aleena Alex, Manu Santhanam, and Pijush Ghosh (2021). “Evaluation of interfacial strength between hydrating cement paste and epoxy coating.“ Construction and Building Materials, 279: 122511

ScJ116.

Pratik Gujar, Manu Santhanam, Ratnakumar Annabatula, and Pijush Ghosh (2020). “Interfacial fracture behavior between cement paste and epoxy coating - An experimental and phase-field approach.“ RILEM Technical Letters, 5: 186 - 193

ScJ115.

S Divya Rani, A V Rahul, and Manu Santhanam (2021). “A multi-analytical approach for pore structure assessment in historic lime mortars.“ Construction and Building Materials, 272, 121905

ScJ114.

Swathy Manohar, and Manu Santhanam (2020). “Correlation between Physical-mineralogical Properties and Weathering Resistance Using Characterisation Case Studies in Historic Indian Bricks.“ International Journal of Architectural Heritage

ScJ113.

M Fathima Suma, Manu Santhanam, and A V Rahul (2020). “The effect of specimen size on deterioration due to external sodium sulphate attack in full immersion studies.“ Cement and Concrete Composites, 114, 103806

ScJ112.

Nair N., Mohammed Haneefa K., Santhanam M., and Gettu R. (2020). “A study on fresh properties of limestone calcined clay blended cementitious systems.“ Construction and Building Materials, 254, 119326

ScJ111.

Nair S.A.O., Panda S., Santhanam M., Sant G., and Neithalath N. (2020). “A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders.“ Cement and Concrete Composites, 112, 103671

ScJ110.

Rahul A.V., Atul Narayan S.P., Neithalath N., and Santhanam M. (2020). “A thermodynamic framework for modelling thixotropic yield stress fluids: Application to cement pastes.“ Journal of Non-Newtonian Fluid Mechanics, 281, 104318

ScJ109.

Rahul A.V., and Santhanam M. (2020). “Evaluating the printability of concretes containing lightweight coarse aggregates.“ Cement and Concrete Composites, 109, 103570

ScJ108.

Athira G., Bahurudeen A., Sahu P.K., Santhanam M., Nanthagopalan P., and Lalu S. (2020). “Effective utilization of sugar industry waste in Indian construction sector: A geospatial approach.“ Journal of Material Cycles and Waste Management, 22(3), 724-736

ScJ107.

Manohar S., Bala K., Santhanam M., and Menon A. (2020). “Characteristics and deterioration mechanisms in coral stones used in a historical monument in a saline environment.“ Construction and Building Materials, 241, 118102

ScJ106.

Rahul A.V., Sharma A., and Santhanam M. (2020). “A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials.“ Cement and Concrete Composites, 108, 103546

ScJ105.

Yang P., Dhandapani Y., Santhanam M., and Neithalath N. (2020). “Simulation of chloride diffusion in fly ash and limestone-calcined clay cement (LC3) concretes and the influence of damage on service-life.“ Cement and Concrete Research, 130, 106010

ScJ104.

Dhandapani Y., and Santhanam M. (2020). “Investigation on the microstructure-related characteristics to elucidate performance of composite cement with limestone-calcined clay combination.“ Cement and Concrete Research, 129, 105959

ScJ103.

Dhandapani Y., Santhanam M., Gettu R., and Pillai R.G. (2020). “Perspectives on blended cementitious systems with calcined clay-limestone combination for sustainable low carbon cement transition.“ Indian Concrete Journal, 94(2), 31-45

ScJ102.

Rahul A.V., Santhanam M., Meena H., and Ghani Z. (2019). “Mechanical characterization of 3D printable concrete.“ Construction and Building Materials, 227, 116710

ScJ101.

Manohar S., Santhanam M., and Chockalingam N. (2019). “Performance and microstructure of bricks with protective coatings subjected to salt weathering.“ Construction and Building Materials, 226, 94-105

ScJ100.

Mohammed Haneefa K., Divya Rani S., Ramasamy R., and Santhanam M. (2019). “Microstructure and geochemistry of lime plaster mortar from a heritage structure.“ Construction and Building Materials, 225, 538-554

ScJ99.

Gettu R., Pillai R.G., Santhanam M., Basavaraj A.S., Rathnarajan S., and Dhanya B.S. (2019). “Correction to: Sustainability-based decision support framework for choosing concrete mixture proportions (Materials and Structures, (2018), 51, 6, (165), 10.1617/s11527-018-1291-z).“ Materials and Structures/Materiaux et Constructions, 52(6), 122

ScJ98.

Divya Rani S., Santhanam M., and Bais S. (2019). “Historic incised plasterwork of India – Characteristics and microstructure.“ Construction and Building Materials, 221, 253-262

ScJ97.

Muthu M., Chandrasekharapuram Ramakrishnan K., Santhanam M., Rangarajan M., and Kumar M. (2019). “Heavy Metal Removal and Leaching from Pervious Concrete Filter: Influence of Operating Water Head and Reduced Graphene Oxide Addition.“ Journal of Environmental Engineering (United States), 145(9), 4019049

ScJ96.

Huy Vu Q., Pham G., Chonier A., Brouard E., Rathnarajan S., Pillai R., Gettu R., Santhanam M., Aguayo F., Folliard K.J., Thomas M.D., Moffat T., Shi C., and Sarnot A. (2019). “Impact of different climates on the resistance of concrete to natural carbonation.“ Construction and Building Materials, 216, 450-467

ScJ95.

Dhanya B.S., Rathnarajan, S., Santhanam M., Pillai R.G., and Gettu R. (2019). “Carbonation and its effect on microstructure of concrete with fly ASH and ground granulated blast furnace slag.“ Indian Concrete Journal, 93(4), 10-21

ScJ94.

Pillai R.G., Gettu R., Santhanam M., Rengaraju S., Dhandapani Y., Rathnarajan S., and Basavaraj A.S. (2019). “Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (LC3).“ Cement and Concrete Research, 118, 111-119

ScJ93.

Rahul A.V., Santhanam M., Meena H., and Ghani Z. (2019). “3D printable concrete: Mixture design and test methods.“ Cement and Concrete Composites, 97, 13-23

ScJ92.

Chopperla S.T., Yamuna V., Bahurudeen A., Santhanam M., and Gopinath A. (2019). “Durability of concrete with agro-waste: A local approach to sustainability.“ Green Materials, 7(2), 84-96

ScJ91.

Hemalatha M.S., and Santhanam M. (2018). “Characterizing supplementary cementing materials in blended mortars.“ Construction and Building Materials, 191, 440-459

ScJ90.

Gettu R., Pillai R.G., Santhanam M., Basavaraj A.S., Rathnarajan S., and Dhanya B.S. (2018). “Sustainability-based decision support framework for choosing concrete mixture proportions.“ Materials and Structures/Materiaux et Constructions, 51(6), 165

ScJ89.

Snellings R., Chwast J., Cizer Ö., De Belie N., Dhandapani Y., Durdzinski P., Elsen J., Haufe J., Hooton D., Patapy C., Santhanam M., Scrivener K., Snoeck D., Steger L., Tongbo S., Vollpracht A., Winnefeld F., and Lothenbach B. (2018). “RILEM TC-238 SCM recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages.“ Materials and Structures/Materiaux et Constructions, 51(6), 172

ScJ88.

Li X., Snellings R., Antoni M., Alderete N.M., Ben Haha M., Bishnoi S., Cizer Ö., Cyr M., De Weerdt K., Dhandapani Y., Duchesne J., Haufe J., Hooton D., Juenger M., Kamali-Bernard S., Kramar S., Marroccoli M., Joseph A.M., Parashar A., Patapy C., Provis J.L., Sabio S., Santhanam M., Steger L., Sui T., Telesca A., Vollpracht A., Vargas F., Walkley B., Winnefeld F., Ye G., Zajac M., Zhang S., and Scrivener K.L. (2018). “Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1.“ Materials and Structures/Materiaux et Constructions, 51(6), 151

ScJ87.

Dhanya B.S., Santhanam M., Gettu R., and Pillai R.G. (2018). “Performance evaluation of concretes having different supplementary cementitious material dosages belonging to different strength ranges.“ Construction and Building Materials, 187, 984-995

ScJ86.

Kamalakannan S., Thirunavukkarasu R., Pillai R.G., and Santhanam M. (2018). “Factors affecting the performance characteristics of cementitious grouts for post-tensioning applications.“ Construction and Building Materials, 180, 681-691

ScJ85.

Muthu M., and Santhanam M. (2018). “Effect of reduced graphene oxide, alumina and silica nanoparticles on the deterioration characteristics of Portland cement paste exposed to acidic environment.“ Cement and Concrete Composites, 91, 118-137

ScJ84.

Snellings R., Chwast J., Cizer Ö., De Belie N., Dhandapani Y., Durdzinski P., Elsen J., Haufe J., Hooton D., Patapy C., Santhanam M., Scrivener K., Snoeck D., Steger L., Tongbo S., Vollpracht A., Winnefeld F., and Lothenbach B. (2018). “Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements—results of a round robin test.“ Materials and Structures/Materiaux et Constructions, 51(4), 111

ScJ83.

Muthu M., Santhanam M., and Kumar M. (2018). “Pb removal in pervious concrete filter: Effects of accelerated carbonation and hydraulic retention time.“ Construction and Building Materials, 174, 224-232

ScJ82.

Dhandapani Y., Sakthivel T., Santhanam M., Gettu R., and Pillai R.G. (2018). “Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3).“ Cement and Concrete Research, 107, 136-151

ScJ81.

Ramaswamy K.P., and Santhanam M. (2018). “A study of deterioration of cement paste due to acid attack using X-ray computed micro-tomography.“ Advances in Cement Research, 30(3), 123-128

ScJ80.

Dhandapani Y., and Santhanam M. (2017). “Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance.“ Cement and Concrete Composites, 84, 36-47

ScJ79.

Deepika S., Anand G., Bahurudeen A., and Santhanam M. (2017). “Construction products with sugarcane bagasse ash binder.“ Journal of Materials in Civil Engineering, 29(10), 4017189

ScJ78.

Surana S., Pillai R.G., and Santhanam M. (2017). “Performance evaluation of curing compounds using durability parameters.“ Construction and Building Materials, 148, 538-547

ScJ77.

Surana S., Pillai R.G., and Santhanam M. (2017). “Performance evaluation of field curing methods using durability index tests.“ Indian Concrete Journal, 91(7), 37-50

ScJ76.

Dhanya B.S., Santhanam M., Kulkarni V., Nanthagopalan P., Bishnoi S., Singh S.P., Ranjani G.I.S., Dinakar P., and Bhaskar S. (2017). “Round robin testing of durability parameters - Towards identification of suitable durability tests for concrete.“ Indian Concrete Journal, 91(7), 11-22

ScJ75.

Ramu Y.K., Akhtar I., Santhanam M., Kwan A.K.H., and Ng P.L. (2017). “Discussion: Use of adiabatic calorimetry for performance assessment of concretes.“ Advances in Cement Research, 29(3), 135-136

ScJ74.

Dhanya B.S., and Santhanam M. (2017). “Performance evaluation of rapid chloride permeability test in concretes with supplementary cementitious materials.“ Materials and Structures/Materiaux et Constructions, 50(1), 67

ScJ73.

Dhandapani Y., and Santhanam M. (2017). “Phases assemblage of the hydration products of trial blends of OPC, limestone and calcined clay cement.“ Cement International, 15(5), 66-69

ScJ72.

Chokkalingam R.B., and Santhanam M. (2017). “Durability characteristics of high early strength concrete.“ Current Science, 113(8), 1568-1577

ScJ71.

Ramu Y.K., Akhtar I., and Santhanam M. (2016). “Use of adiabatic calorimetry for performance assessment of concretes.“ Advances in Cement Research, 28(8), 485-493

ScJ70.

Liu M.Y.J., Alengaram U.J., Santhanam M., Jumaat M.Z., and Mo K.H. (2016). “Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete.“ Construction and Building Materials, 120, 112-122

ScJ69.

Murugan M., Santhanam M., Sen Gupta S., Pradeep T., and Shah S.P. (2016). “Influence of 2D rGO nanosheets on the properties of OPC paste.“ Cement and Concrete Composites, 70, 48-59

ScJ68.

Shajil N., Srinivasan S.M., and Santhanam M. (2016). “An experimental study on self-centering and ductility of pseudo-elastic shape memory alloy (PESMA) fiber reinforced beam and beam-column joint specimens.“ Materials and Structures/Materiaux et Constructions, 49(3), 783-793

ScJ67.

Bahurudeen A., Wani K., Basit M.A., and Santhanam M. (2016). “Assesment of pozzolanic performance of sugarcane bagasse ash.“ Journal of Materials in Civil Engineering, 28(2), 4015095

ScJ66.

Nilsson L.-O., Kamali-Bernard S., and Santhanam M. (2016). “Durability of reinforced concrete structures and penetrability.“ RILEM State-of-the-Art Reports, 18, 9-17

ScJ65.

Bahurudeen A., Hemalatha M.S., and Santhanam M. (2016). “Need of an efficient procedure for the evaluation of pozzolanic performance of supplementary cementitious materials.“ Indian Concrete Journal, 90(1), 80-92

ScJ64.

Bahurudeen A., Kanraj D., Gokul Dev V., and Santhanam M. (2015). “Performance evaluation of sugarcane bagasse ash blended cement in concrete.“ Cement and Concrete Composites, 59, 77-88

ScJ63.

Santhanam M. (2015). “Editorial.“ Advances in Cement Research, 27(9), 495-496

ScJ62.

Yuvaraj D., and Santhanam M. (2015). “Experimental study on evolution of pore structure of cementitious pastes using different techniques.“ RILEM Bookseries, ,10, 487-489

ScJ61.

Suma F., and Santhanam M. (2015). “Investigation of sulphate attack on limestone-calcined clay cement mortars.“ RILEM Bookseries, 10, 587

ScJ60.

Bahurudeen A., and Santhanam M. (2015). “Influence of different processing methods on the pozzolanic performance of sugarcane bagasse ash.“ Cement and Concrete Composites, 56, 32-45

ScJ59.

Siva V.H.R., Achyuthan H., and Santhanam M. (2015). “Pozzolanic characteristics of Young Toba Tuff.“ Current Science, 109(10), 1869-1874

ScJ58.

Bahurudeen A., Vaisakh K.S., and Santhanam M. (2015). “Availability of sugarcane bagasse ash and potential for use as a supplementary cementitious material in concrete.“ Indian Concrete Journal, 89(6), 41-50

ScJ57.

Bahurudeen A., Marckson A.V., Kishore A., and Santhanam M. (2014). “Development of sugarcane bagasse ash based Portland pozzolana cement and evaluation of compatibility with superplasticizers.“ Construction and Building Materials, 68, 465-475

ScJ56.

Sanish K.B., and Santhanam M. (2014). “Ultrasonic monitoring of strength development of concrete.“ Indian Concrete Journal, 88(11), 66-74

ScJ55.

Mohammed Haneefa K., Santhanam M., and Parida F.C. (2014). “Deterioration of limestone aggregate mortars by liquid sodium in fast breeder reactor environment.“ Nuclear Engineering and Design, 275, 287-299

ScJ54.

Cheriyan S.G., Dhanya B.S., and Santhanam M. (2014). “Durability indices for concretes with different dosages of mineral admixtures.“ Indian Concrete Journal, 88(3), 60-68

ScJ53.

Haneefa K.M., Santhanam M., and Parida F.C. (2013). “Thermal performance of limestone mortars for use in sodium cooled fast breeder reactors.“ Indian Concrete Journal, 87(12), 25-41

ScJ52.

Haneefa K.M., Santhanam M., and Parida F.C. (2013). “Performance characterization of geopolymer composites for hot sodium exposed sacrificial layer in fast breeder reactors.“ Nuclear Engineering and Design, 265, 542-553

ScJ51.

Haneefa K.M., Santhanam M., Ramasamy R., and Parida F.C. (2013). “Hot sodium-triggered thermo-chemical degradation of concrete aggregates in the sodium resistant sacrificial layers of fast breeder reactors.“ Nuclear Engineering and Design, 265, 654-667

ScJ50.

Sanish K.B., Neithalath N., and Santhanam M. (2013). “Monitoring the evolution of material structure in cement pastes and concretes using electrical property measurements.“ Construction and Building Materials, 49, 288-297

ScJ49.

Dhanya B.S., and Santhanam M. (2013). “Performance specifications for concrete construction in India: Are we ready?.“ Indian Concrete Journal, 87(9), 36-43

ScJ48.

Cheriyan S.G., and Santhanam M. (2013). “Demystifying durability testing for Indian concrete construction industry.“ Indian Concrete Journal, 87(7), 18-30

ScJ47.

Prasath G., and Santhanam M. (2013). “Experimental investigations on heat evolution during hydration of cementitious materials in concrete using adiabatic calorimetry.“ Indian Concrete Journal, 87(5), 19-28

ScJ46.

Shajil N., Srinivasan S.M., and Santhanam M. (2013). “Self-centering of shape memory alloy fiber reinforced cement mortar members subjected to strong cyclic loading.“ Materials and Structures/Materiaux et Constructions, 46(4), 651-661

ScJ45.

Mohammed Haneefa K., Santhanam M., and Parida F.C. (2013). “Review of concrete performance at elevated temperature and hot sodium exposure applications in nuclear industry.“ Nuclear Engineering and Design, 258, 76-88

ScJ44.

Divya Rani S., Santhanam M., Venkatachalapathy V., and Sivathanu Pillai C. (2013). “Permissible temperature in Fast Breeder Reactor vault concrete.“ Indian Concrete Journal, 87(2), 11-20

ScJ43.

Santhanam M. (2013). “Test methods for magnesium attack.“ RILEM State-of-the-Art Reports, 10, 345-354

ScJ42.

Santhanam M. (2013). “Magnesium attack of cementitious materials in marine environments.“ RILEM State-of-the-Art Reports, 10, 75-90

ScJ41.

Yuan Q., and Santhanam M. (2013). “Test methods for chloride transport in concrete.“ RILEM State-of-the-Art Reports, 10, 319-343

ScJ40.

Divya Rani S., and Santhanam M. (2012). “Influence of moderately elevated temperatures on engineering properties of concrete used for nuclear reactor vaults.“ Cement and Concrete Composites, 34(8), 917-923

ScJ39.

Nanthagopalan P., and Santhanam M. (2012). “An empirical approach for the optimisation of aggregate combinations for self-compacting concrete.“ Materials and Structures/Materiaux et Constructions, 45(8), 1167-1179

ScJ38.

Ramalingam S., and Santhanam M. (2012). “Environmental exposure classifications for concrete construction - A relook.“ Indian Concrete Journal, 86(5), 18-28

ScJ37.

Jayasree C., Santhanam M., and Gettu R. (2011). “Cement-superplasticiser compatibility - Issues and challenges.“ Indian Concrete Journal, 85(7), 48-60

ScJ36.

Nanthagopalan P., and Santhanam M. (2011). “Fresh and hardened properties of self-compacting concrete produced with manufactured sand.“ Cement and Concrete Composites, 33(3), 353-358

ScJ35.

Santhanam M. (2011). “Effect of solution concentration on the attack of concrete by combined sulphate and chloride solutions.“ European Journal of Environmental and Civil Engineering, 15(7), 1003-1015

ScJ34.

Santhanam M. (2010). “Effect of solution concentration on the attack of concrete by combined sulphate and chloride solutions.“ European Journal of Environmental and Civil Engineering, 15(7), 1003-1015

ScJ33.

Santhanam M., Venkatachalapathy V., Sivathanupillai C., and Gettu R. (2010). “Mechanical properties of high density concrete used in fast reactors for structural and shielding purposes.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 91, 15-22

ScJ32.

Chockalingam R.B., Santhanam M., Ballim Y., and Graham P.C. (2010). “A comparative assessment of selected Indian and South African cement clinkers.“ Indian Concrete Journal, 84(6), 9-16

ScJ31.

Nanthagopalan P., and Santhanam M. (2010). “A new empirical test method for the optimisation of viscosity modifying agent dosage in self-compacting concrete.“ Materials and Structures/Materiaux et Constructions, 43, 203-212

ScJ30.

Nanthagopalan P., and Santhanam M. (2009). “Experimental investigations on the influence of paste composition and content on the properties of Self-Compacting Concrete.“ Construction and Building Materials, 23(11), 3443-3449

ScJ29.

Sengupta A., and Santhanam M. (2009). “Influence of aggregate characteristics on uniformity of SCC.“ Indian Concrete Journal, 83(6), 50-60

ScJ28.

Kumar S.A., and Santhanam M. (2009). “Damage of concrete in uniaxial compression - An evaluation using ultrasonic method and optical microscopy.“ Journal of Structural Engineering (Madras), 36(1), 22-28

ScJ27.

Kasthurba A.K., Santhanam M., and Achyuthan H. (2008). “Investigation of laterite stones for building purpose from Malabar region, Kerala, SW India - Chemical analysis and microstructure studies.“ Construction and Building Materials, 22(12), 2400-2408

ScJ26.

Nanthagopalan P., and Santhanam M. (2008). “A new approach to optimisation of paste composition in self-compacting concrete.“ Indian Concrete Journal, 82(11), 11-18

ScJ25.

Nanthagopalan P., Haist M., Santhanam M., and Müller H.S. (2008). “Investigation on the influence of granular packing on the flow properties of cementitious suspensions.“ Cement and Concrete Composites, 30(9), 763-768

ScJ24.

Sivakumar A., and Santhanam M. (2008). “Evaluation of drying shrinkage and residual stresses of a high strength concrete using restrained ring test.“ Indian Concrete Journal, 82(6), 49-57

ScJ23.

Srinath B., and Santhanam M. (2008). “Electrical monitoring of early age behaviour of cement mortars.“ Indian Concrete Journal, 82(4), 37-43

ScJ22.

Sivakumar A., and Santhanam M. (2007). “Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres.“ Cement and Concrete Composites, 29(7), 603-608

ScJ21.

Sivakumar A., and Santhanam M. (2007). “A quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete.“ Cement and Concrete Composites, 29(7), 575-581

ScJ20.

Kasthurba A.K., Santhanam M., and Mathews M.S. (2007). “Investigation of laterite stones for building purpose from Malabar region, Kerala state, SW India - Part 1: Field studies and profile characterisation.“ Construction and Building Materials, 21(1), 73-82

ScJ19.

Santhanam M., Cohen M., and Olek J. (2006). “Differentiating seawater and groundwater sulfate attack in Portland cement mortars.“ Cement and Concrete Research, 36(12), 2132-2137

ScJ18.

Kasthurba A.K., and Santhanam M. (2006). “Laterite as a prime masonry material for housing construction in Malabar region of western India.“ International Journal for Housing Science and Its Applications, 30(3), 183-193

ScJ17.

Alexander M., Ballim Y., and Santhanam M. (2005). “Performance specifications for concrete using the durability index approach.“ Indian Concrete Journal, 79(12), 41-46

ScJ16.

Rajasekaran I., and Santhanam M. (2005). “Application of particle packing to produce roller compacted concrete.“ Indian Concrete Journal, 79(10), 23-28

ScJ15.

Kasthurba A.K., and Santhanam M. (2005). “A re-look into the code specifications for the strength evaluation of laterite stone blocks for masonry purposes.“ Journal of the Institution of Engineers (India): Architectural Engineering Division, 86, 1-6

ScJ14.

Senthil Kumar V., and Santhanam M. (2004). “Use of a particle packing model to produce HPC at optimum cement content.“ Indian Concrete Journal, 78(12), 22-28

ScJ13.

Mahesh Y.V.S.S.U., and Santhanam M. (2004). “Simple test methods to characterise the rheology of self-compacting concrete.“ Indian Concrete Journal, 78(6), 39-43

ScJ12.

Santhanam M., and Subramanian S. (2004). “Current developments in self-compacting concrete.“ Indian Concrete Journal, 78(6), 11-22

ScJ11.

Dili A.S., and Santhanam M. (2004). “Investigations on reactive powder concrete: A developing ultra high-strength technology.“ Indian Concrete Journal, 78(4), 4-33

ScJ10.

Kumar S.V., and Santhanam M. (2003). “Particle packing theories and their application in concrete mixture proportioning: A review.“ Indian Concrete Journal, 77(9), 1324-1331

ScJ9.

Santhanam M., Cohen M.D., and Olek J. (2003). “Effects of gypsum formation on the performance of cement mortars during external sulfate attack.“ Cement and Concrete Research, 33(3), 325-332

ScJ8.

Jallad K.N., Santhanam M., and Cohen M.D. (2003). “Stability and reactivity of thaumasite at different pH levels.“ Cement and Concrete Research, 33(3), 433-437

ScJ7.

Santhanam M., Cohen M.D., and Olek J. (2003). “Mechanism of sulfate attack: A fresh look - Part 2. Proposed mechanisms.“ Cement and Concrete Research, 33(3), 341-346

ScJ6.

Hime W.G., Santhanam M., Cohen M.D., and Olek J. (2002). “Film model for coated cement concrete.“ Cement and Concrete Research, 32(12), 1931-1936

ScJ5.

Santhanam M., Cohen M.D., and Olek J. (2002). “Mechanism of sulfate attack: A fresh look - Part 1; Summary of experimental results.“ Cement and Concrete Research, 32(6), 915-921

ScJ4.

Santhanam M., Cohen M.D., and Olek J. (2002). “Modeling the effects of solution temperature and concentration during sulfate attack on cement mortars.“ Cement and Concrete Research, 32(4), 585-592

ScJ3.

Bensted J., Santhanam M., Cohen M.D., and Olek J. (2002). “A discussion of the review paper quot;sulphate attack research - Whither now?.“ Cement and Concrete Research, ,32(6), 995-1000

ScJ2.

Santhanam M., Cohen M.D., and Olek J. (2001). “Sulfate attack research - Whither now?.“ Cement and Concrete Research, 31(6), 845-851

ScJ1.

Jallad K.N., Santhanam M., Cohen M.D., and Ben-Amotz D. (2001). “Chemical mapping of thaumasite formed in sulfate-attacked cement mortar using near-infrared Raman imaging microscopy.“ Cement and Concrete Research, 31(6), 953-958