ScI75.

Subramaniam N., and Ramamurthy K. (2020). “Effect of mode of delivery and background noise on speech characteristics of talkers in a classroom environment.“ Building Acoustics, 27(2), 113-135

ScI74.

Shriram S., and Ramamurthy K. (2019). “Assessment of CO2-based demand controlled ventilation requirement for a flexible work environment with ductless split air conditioners.“ Science and Technology for the Built Environment, 25(7), 805-818

ScI73.

Priyadharshini P., Ramamurthy K., and Robinson R.G. (2019). “Influence of Temperature and Duration of Thermal Treatment on Properties of Excavated Soil as Fine Aggregate in Cement Mortar.“ Journal of Materials in Civil Engineering, 31(8), 4

ScI72.

Shriram S., Ramamurthy K., and Ramakrishnan S. (2019). “Effect of occupant-induced indoor CO2 concentration and bioeffluents on human physiology using a spirometric test.“ Building and Environment, 149, 58-67

ScI71.

Priyadharshini P., Ramamurthy K., and Robinson R.G. (2018). “Reuse potential of stabilized excavation soil as fine aggregate in cement mortar.“ Construction and Building Materials, 192, 141-152

ScI70.

Priyadharshini P., Ramamurthy K., and Robinson R.G. (2018). “Sustainable reuse of excavation soil in cementitious composites.“ Journal of Cleaner Production, 176, 999-1011

ScI69.

Muthu Kumar E., and Ramamurthy K. (2017). “Influence of production on the strength, density and water absorption of aerated geopolymer paste and mortar using Class F fly ash.“ Construction and Building Materials, 156, 1137-1149

ScI68.

Priyadharshini P., Ramamurthy K., and Robinson R.G. (2017). “Excavated soil waste as fine aggregate in fly ash based geopolymer mortar.“ Applied Clay Science, 146, 81-91

ScI67.

Siva M., Ramamurthy K., and Dhamodharan R. (2017). “Development of a green foaming agent and its performance evaluation.“ Cement and Concrete Composites, 80, 245-257

ScI66.

Nair M.G., Ramamurthy K., and Ganesan A.R. (2016). “Design of an anidolic concentrator and evaluation of daylight enhancement under an overcast sky.“ Lighting Research and Technology, 48(8), 917-929

ScI65.

Anju T.R., Ramamurthy K., and Dhamodharan R. (2016). “Surface modified microcrystalline cellulose from cotton as a potential mineral admixture in cement mortar composite.“ Cement and Concrete Composites, 74, 147-153

ScI64.

Muthu Kumar E., and Ramamurthy K. (2015). “Effect of fineness and dosage of aluminium powder on the properties of moist-cured aerated concrete.“ Construction and Building Materials, 95, 6937, 486-496

ScI63.

Nair M.G., Ganesan A.R., and Ramamurthy K. (2015). “Daylight enhancement using laser cut panels integrated with a profiled Fresnel collector.“ Lighting Research and Technology, 47(8), 1017-1028

ScI62.

Nair M.G., Ganesan A.R., and Ramamurthy K. (2015). “Conceptual design and assessment of a profiled Fresnel lens daylight collector.“ Lighting Research and Technology, 47(5), 533-547

ScI61.

Siva M., Ramamurthy K., and Dhamodharan R. (2015). “Sodium salt admixtures for enhancing the foaming characteristics of sodium lauryl sulphate.“ Cement and Concrete Composites, 57, 133-141

ScI60.

Vasugi V., and Ramamurthy K. (2014). “Identification of admixture for pelletization and strength enhancement of sintered coal pond ash aggregate through statistically designed experiments.“ Materials and Design, 60, 563-575

ScI59.

Vasugi V., and Ramamurthy K. (2014). “Identification of design parameters influencing manufacture and properties of cold-bonded pond ash aggregate.“ Materials and Design, 54, 264-278

ScI58.

Nair M.G., Ramamurthy K., and Ganesan A.R. (2014). “Classification of indoor daylight enhancement systems.“ Lighting Research and Technology, 46(3), 245-267

ScI57.

Geetha S., and Ramamurthy K. (2013). “Properties of geopolymerised low-calcium bottom ash aggregate cured at ambient temperature.“ Cement and Concrete Composites, 43, 20-30

ScI56.

Sathya Narayanan J., and Ramamurthy K. (2013). “Development of solid, foam concrete interlocking blocks and studies on short masonry specimens.“ Masonry International, 26(1), 7-16

ScI55.

Sathya Narayanan J., and Ramamurthy K. (2012). “Identification of set-accelerator for enhancing the productivity of foam concrete block manufacture.“ Construction and Building Materials, 37, 144-152

ScI54.

Indu Siva Ranjani G., and Ramamurthy K. (2012). “Behaviour of foam concrete under sulphate environments.“ Cement and Concrete Composites, 34(7), 825-834

ScI53.

Manikandan R., and Ramamurthy K. (2012). “Physical characteristics of sintered fly ash aggregate containing clay binders.“ Journal of Material Cycles and Waste Management, 14(2), 120-131

ScI52.

Joseph G., and Ramamurthy K. (2011). “Autogenous curing of cold-bonded fly-ash-aggregate concrete.“ Journal of Materials in Civil Engineering, 23(4), 393-401

ScI51.

Geetha S., and Ramamurthy K. (2011). “Properties of sintered low calcium bottom ash aggregate with clay binders.“ Construction and Building Materials, 25(4), 2002-2013

ScI50.

Ranjani I.S., and Ramamurthy K. (2010). “Relative assessment of density and stability of foam produced with four synthetic surfactants.“ Materials and Structures/Materiaux et Constructions, 43(10), 1317-1325

ScI49.

Geetha S., and Ramamurthy K. (2010). “Reuse potential of low-calcium bottom ash as aggregate through pelletization.“ Waste Management, 30, 1528-1535

ScI48.

Nair H.K., and Ramamurthy K. (2010). “Behaviour of concrete with sintered fly ash aggregate.“ Indian Concrete Journal, 84(6), 33-38

ScI47.

Geetha S., and Ramamurthy K. (2010). “Environmental friendly technology of cold-bonded bottom ash aggregate manufacture through chemical activation.“ Journal of Cleaner Production, 18(15), 1563-1569

ScI46.

Nambiar E.K., and Ramamurthy K. (2009). “Shrinkage behavior of foam concrete.“ Journal of Materials in Civil Engineering, 21(11), 631-636

ScI45.

Manikandan R., and Ramamurthy K. (2009). “Swelling characteristic of bentonite on pelletization and properties of fly ash aggregates.“ Journal of Materials in Civil Engineering, 21(10), 578-586

ScI44.

Ramamurthy K., Kunhanandan Nambiar E.K., and Indu Siva Ranjani G. (2009). “A classification of studies on properties of foam concrete.“ Cement and Concrete Composites, 31(6), 388-396

ScI43.

Joseph G., and Ramamurthy K. (2009). “Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete.“ Construction and Building Materials, 23(5), 1862-1870

ScI42.

Padmini A.K., Ramamurthy K., and Mathews M.S. (2009). “Influence of parent concrete on the properties of recycled aggregate concrete.“ Construction and Building Materials, 23(2), 829-836

ScI41.

Joseph G., and Ramamurthy K. (2008). “Effect of cold-bonded flyash aggregate on workability and mechanical properties, of concrete.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 89, 33-38

ScI40.

Manikandan R., and Ramamurthy K. (2008). “Effect of curing method on characteristics of cold bonded fly ash aggregates.“ Cement and Concrete Composites, 30(9), 848-853

ScI39.

Nambiar E.K.K., and Ramamurthy K. (2008). “Models for strength prediction of foam concrete.“ Materials and Structures/Materiaux et Constructions, 41(2), 247-254

ScI38.

Kunhanandan Nambiar E.K., and Ramamurthy K. (2008). “Fresh state characteristics of foam concrete.“ Journal of Materials in Civil Engineering, 20(2), 111-117

ScI37.

Nambiar E.K.K., and Ramamurthy K. (2007). “Sorption characteristics of foam concrete.“ Cement and Concrete Research, 37(9), 1341-1347

ScI36.

Manikandan R., and Ramamurthy K. (2007). “Influence of fineness of fly ash on the aggregate pelletization process.“ Cement and Concrete Composites, 29(6), 456-464

ScI35.

Mashood P.K., Krishnamoorthy C.S., and Ramamurthy K. (2007). “KB-GA-based hybrid system for layout planning of multistory buildings.“ Journal of Computing in Civil Engineering, 21(4), 229-237

ScI34.

Nambiar E.K.K., and Ramamurthy K. (2007). “Air-void characterisation of foam concrete.“ Cement and Concrete Research, 37(2), 221-230

ScI33.

Nambiar E.K.K., and Ramamurthy K. (2006). “Models relating mixture composition to the density and strength of foam concrete using response surface methodology.“ Cement and Concrete Composites, 28(9), 752-760

ScI32.

Harikrishnan K.I., and Ramamurthy K. (2006). “Influence of pelletization process on the properties of fly ash aggregates.“ Waste Management, 26(8), 846-852

ScI31.

Nambiar E.K.K., and Ramamurthy K. (2006). “Influence of filler type on the properties of foam concrete.“ Cement and Concrete Composites, 28(5), 475-480

ScI30.

Ramamurthy K., and Harikrishnan K.I. (2006). “Influence of binders on properties of sintered fly ash aggregate.“ Cement and Concrete Composites, 28(1), 33-38

ScI29.

Acharya S., Menon D., and Ramamurthy K. (2005). “Experimental evaluation of radial stresses in singly curved PSC shell elements.“ Journal of Structural Engineering (Madras), 32(4), 283-290

ScI28.

Harikrishnan K.I., and Ramamurthy K. (2004). “Study of parameters influencing the properties of sintered fly ash aggregates.“ Journal of Solid Waste Technology and Management, 30(3), 136-142

ScI27.

Anand K.B., and Ramamurthy K. (2003). “Laboratory-based productivity study on alternative masonry systems.“ Journal of Construction Engineering and Management, 129(3), 237-242

ScI26.

Anand K.B., Vasudevan V., and Ramamurthy K. (2003). “Water permeability assessment of alternative masonry systems.“ Building and Environment, 38(7), 947-957

ScI25.

Padmini A.K., Ramamurthy K., and Mathews M.S. (2002). “Relative moisture movement through recycled aggregate concrete.“ Magazine of Concrete Research, 54(5), 377-384

ScI24.

Rajagopalan N., Ragunath S.S., and Ramamurthy K. (2001). “2-D finite element analysis of singly curved prestressed concrete shells.“ Journal of Structural Engineering (Madras), 28(3), 141-146

ScI23.

Anand K.B., and Ramamurthy K. (2001). “Influence of construction method on water permeation of interlocking block masonry.“ Journal of Architectural Engineering, 7(2), 52-56

ScI22.

Ramamurthy K., and Anand K.B. (2001). “Influence of construction method on the behaviour of interlocking block masonry.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 81(4), 167-173

ScI21.

Narayanan N., and Ramamurthy K. (2001). “Reply to the discussion by H. Vaupel and I. Odler of the paper .“ Cement and Concrete Research, 31(1), 155

ScI20.

Padmini A.K., Ramamurthy K., and Mathews M.S. (2001). “Behaviour of concrete with low-strength bricks as lightweight coarse aggregate.“ Magazine of Concrete Research, 53(6), 367-375

ScI19.

Narayanan N., and Ramamurthy K. (2000). “Prediction relations for compressive strength of aerated concrete.“ ACI Structural Journal, 97(3), 367-373

ScI18.

Narayanan N., and Ramamurthy K. (2000). “Structure and properties of aerated concrete: A review.“ Cement and Concrete Composites, 22(5), 321-329

ScI17.

Ramamurthy K., and Narayanan N. (2000). “Influence of composition and curing on drying shrinkage of aerated concrete.“ Materials and Structures/Materiaux et Constructions, 33(4), 243-250

ScI16.

Ramamurthy K., and Narayanan N. (2000). “Factors influencing the density and compressive strength of aerated concrete.“ Magazine of Concrete Research, 52(3), 163-168

ScI15.

Narayanan N., and Ramamurthy K. (2000). “Microstructural investigations on aerated concrete.“ Cement and Concrete Research, 30(3), 457-464

ScI14.

Anand K.B., and Ramamurthy K. (2000). “Development and performance evaluation of interlocking-block masonry.“ Journal of Architectural Engineering, 6(2), 45-50

ScI13.

Ramamurthy K., Sathish V., and Ambalavanan R. (2000). “Compressive strength prediction of hollow concrete block masonry prisms.“ ACI Structural Journal, 97(1), 61-67

ScI12.

Narayanan N., Ramamurthy K., and Ambalavanan R. (2000). “Cost effectiveness analysis of two-way filler slab with Mangalore pattern tiles.“ Indian Concrete Journal, 74(3), 145-149

ScI11.

Anand K.B., and Ramamurthy K. (1999). “Techniques for accelerating masonry construction.“ International Journal for Housing Science and Its Applications, 23(4), 233-241

ScI10.

Ambalavanan R., Narayanan N., and Ramamurthy K. (1999). “Cost-effectiveness analysis of alternate one-way floor/roof systems.“ Indian Concrete Journal, 73(3), 171-177

ScI9.

Ramamurthy K., and Gumaste K.S. (1998). “Properties of recycled aggregate concrete.“ Indian Concrete Journal, 72(1), 49-53

ScI8.

Krishnan G., and Ramamurthy K. (1997). “Basic compressive stresses for concrete hollow block masonry.“ Indian Concrete Journal, 71(4), 209-213

ScI7.

Ramamurthy K., and Radhakrishnan R. (1996). “Analysis of cost-effectiveness of concrete hollow block masonry.“ Indian Concrete Journal, 70(8), 443-447

ScI6.

Ramamurthy K., and Rajasekhar G. (1996). “Flexural Strength of Concrete Hollow Block Masonry.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 77, 29-33

ScI5.

Arumugam R.A., and Ramamurthy K. (1996). “Study of compressive strength characteristics of coral aggregate concrete.“ Magazine of Concrete Research, 48(3), 141-148

ScI4.

Ramamurthy K. (1995). “Behaviour of grouted concrete hollow block masonry prisms.“ Magazine of Concrete Research, 47(173), 345-354

ScI3.

Ramamurthy K., and Ganesan T.P. (1993). “Analysis of concrete hollow block masonry prisms under eccentric compression.“ Magazine of Concrete Research, 45(163), 147-153

ScI2.

Ganesan T.P., and Ramamurthy K. (1992). “Behavior of concrete hollow-block masonry prisms under axial compression.“ Journal of Structural Engineering (United States), 118(7), 1751-1769

ScI1.

Ganesan T.P., Radhakrishnan R., Achyutha H., and Ramamurthy K. (1989). “Model study of the assembly hall building in the Kerala State Legislature Complex, Trivandrum.“ Journal of Structural Engineering (Madras), 16(3), 79-84

ScC3.

Subramaniam N., and Ramamurthy K. (2019). “Influence of classroom acoustics on student presentations.“ INTER-NOISE 2019 MADRID - 48th International Congress and Exhibition on Noise Control Engineering

ScC2.

Ramamurthy K., and Nair M.G. (2019). “Development of location specific profiled fresnel collector for light pipes for harnessing daylight.“ Recent Advances in Materials, Mechanics and Management - Proceedings of the 3rd International Conference on Materials, Mechanics and Management, IMMM 2017

ScC1.

Joseph G., and Ramamurthy K. (2009). “Workability and strength behaviour of concrete with cold-bonded fly ash aggregate.“ Materials and Structures/Materiaux et Constructions