ScJ124.

P. M. Anilkumar, S. Scheffler, A. Haldar, M. Brod, B. N. Rao, E. L. Jansen, and R. Rolfes (2022). “Nonlinear dynamic modeling of bistable variable stiffness composite laminates.“ Journal of Sound and Vibration, 545

ScJ123.

K. S. Akhil, P. M. Anilkumar, A.Haldar, and B. N. Rao (2022). “Vibration Analysis of Bistable Unsymmetric Laminates with Curvilinear Fiber Paths.“ International Journal of Structural Stability and Dynamics, 2350089

ScJ122.

Kumar A.P., Anilkumar P.M., Haldar A., Scheffler S., Dorn O., Rao B.N., and Rolfes R. (2022). “Investigations on the multistability of series-connected unsymmetric laminates.“ Composites Science and Technology, 229

ScJ121.

Shereena O.A., Krishnanunni C.G., and Rao B.N. (2022). “Simultaneous State-Input-Stiffness Estimation for Nonlinear Duffing Oscillators Avoiding Jacobian Linearization .“ International Journal of Structural Stability and Dynamics, 22(13)

ScJ120.

Natraj, Rao B.N., and Reddy K.S. (2022). “Optical and structural optimization of a large aperture solar parabolic trough collector .“ Sustainable Energy Technologies and Assessments, 53

ScJ119.

Anilkumar P.M., Haldar A., Scheffler S., Jansen E.L., Rao B.N., and Rolfes R. (2022). “Morphing of bistable variable stiffness composites using distributed MFC actuators.“ Composite Structures, 289

ScJ118.

Suresh Kumar R., Rao B.N., and Velusamy K. (2022). “Asymptotic Crack Size of a Prototype Sized Pipe Bend and Comparison With A16 Master Curve.“ Journal of Pressure Vessel Technology, PVT-20-1182

ScJ117.

Kumar A.P., Anilkumar P.M., Haldar A., Scheffler S., Jansen E.L, Rao B.N., and Rolfes R. (2021). “Tailoring bistability in unsymmetrical laminates using an additional composite strip .“ Thin-Walled Structures, 168

ScJ116.

Haldar A., Anilkumar P.M., Jansen E.L., Rao B.N., and Rolfes R. (2021). “Semi-analytical investigations on bistable cross-ply laminates with MFC actuators.“ Smart Materials and Structures, 30

ScJ115.

Sai Kumar G., Krishnanunni C.G., and Rao B.N. (2021). “Indirect Damage Identification in Bridges Based on Dynamic Tyre Pressure Monitoring..“ International Journal of Structural Stability and Dynamics, 21(4)

ScJ114.

Natraj, Rao B.N., and Reddy K.S. (2021). “Wind load and structural analysis for standalone solar parabolic trough collector.“ Renewable Energy, 173

ScJ113.

Anilkumar P.M., Haldar A., Jansen E.L., Rao B.N., and Rolfes R. (2021). “Snap-through of bistable variable stiffness laminates using MFC actuators.“ Composite Structures, 266

ScJ112.

Sagadevan R., and Rao B.N. (2020). “Flexural Behavior of Reinforced Concrete Biaxial Voided Square Slabs.“ ACI Structural Journal, 117

ScJ111.

Suresh Kumar R., Rao B.N. , Velusamy K., Sasikala G., and Jalaldeen S. (2020). “Fatigue crack growth material parameters- based on prototype pipe bend test and comparison with conventional parameters.“ International Journal of Pressure Vessels and Piping, 188

ScJ110.

Phanendra Kumar A. , Anilkumar P. M., and Rao B. N. (2020). “Study on the Actuation Force of Triangular Bistable Composite Laminates.“ Material Design & Processing Communications, 3(5)

ScJ109.

Sagadevan R., and Rao B.N. (2020). “Effect of reinforcement orientation on ultimate flexural capacity of solid and biaxial voided RC slabs.“ Indian Concrete Journal, 94

ScJ108.

Sagadevan R., and Rao B.N. (2020). “Experimental and analytical investigation of structural performance of vertical concrete formworks.“ Asian Journal of Civil Engineering, 21

ScJ107.

Shereena O.A., and Rao B.N. (2020). “Combined Road Roughness and Vehicle Parameter Estimation Based on a Minimum Variance Unbiased Estimator.“ International Journal of Structural Stability and Dynamics, 20

ScJ106.

Sagadevan R., and Rao B.N. (2020). “Experimental and analytical study on structural performance of polyurethane foam-filled built-up galvanized iron members.“ Thin-Walled Structures, 146

ScJ105.

Shereena O.A., and Rao B.N. (2019). “Pavement condition assessment through jointly estimated road roughness and vehicle parameters.“ Structural Monitoring and Maintenance, 6

ScJ104.

Sagadevan R., and Rao B.N. (2019). “Effect of void former shapes on one-way flexural behaviour of biaxial hollow slabs.“ International Journal of Advanced Structural Engineering, 11

ScJ103.

Sagadevan R., and Rao B.N. (2019). “Experimental and analytical investigation of punching shear capacity of biaxial voided slabs.“ Structures, 20

ScJ102.

Suresh Kumar R., Rao B.N., and Velusamy K. (2019). “Relevance of factor of safety based on number of cycles in the prediction of fatigue crack initiation as per A16 sigma-d approach.“ International Journal of Pressure Vessels and Piping, 175

ScJ101.

Krishnanunni C.G., and Rao B.N. (2019). “Decoupled technique for dynamic response of vehicle-pavement systems.“ Engineering Structures, 191

ScJ100.

Suresh Kumar R., Rao B.N., Velusamy K., and Jalaldeen S. (2019). “Specimen level and component level simulations of fatigue crack growth behavior under cyclic bending.“ Frattura ed Integrita Strutturale, 13

ScJ99.

Anilkumar P.M., Haldar A., Jansen E., Rao B.N., and Rolfes R. (2019). “Design optimization of multistable variable-stiffness laminates.“ Mechanics of Advanced Materials and Structures, 26

ScJ98.

Sagadevan R., and Rao B.N. (2019). “Evaluation of one-way flexural behaviour of biaxial voided slab.“ Indian Concrete Journal, 98

ScJ97.

Snehasagar G., Krishnanunni C.G., and Rao B.N. (2019). “Dynamics of vehicle–pavement system based on a viscoelastic Euler–Bernoulli beam model.“ International Journal of Pavement Engineering

ScJ96.

Jayalakshmi S., Raghukanth S.T.G., and Rao B.N. (2018). “An XFEM Model for Seismic Activity in Indian Plate.“ Journal of Earthquake Engineering, 22

ScJ95.

Kuriakose B., Krishnan A., Dodagoudar G.R., and Rao B.N. (2017). “Reliability analysis of raft foundation on uniformly random soils.“ Journal of Structural Engineering (India), 43

ScJ94.

Muthulingam S., and Rao B.N. (2016). “Effects of rebar on chloride ingress in steel reinforced concrete components.“ Journal of Structural Engineering (India), 43

ScJ93.

Muthulingam S., and Rao B.N. (2016). “Chloride binding and time-dependent surface chloride content models for fly ash concrete.“ Frontiers of Structural and Civil Engineering, 10

ScJ92.

Kuriakose B., Rao B.N., Dodagoudar G.R., and Venkatachalapathy V. (2015). “Modelling of heat of hydration for thick concrete constructions - A note.“ Journal of Structural Engineering (India), 42

ScJ91.

Muthulingam S., and Rao B.N. (2015). “Consistent models for estimating chloride ingress parameters in fly ash concrete.“ Journal of Building Engineering, 3

ScJ90.

Muthulingam S., and Rao B.N. (2015). “Numerical assessment of non-uniform corrosion scenarios of rebar in concrete exposed to natural chloride environment.“ Sadhana - Academy Proceedings in Engineering Sciences, 40

ScJ89.

Muthulingam S., and Rao B.N. (2015). “Non-uniform corrosion states of rebar in concrete under chloride environment.“ Corrosion Science, 93

ScJ88.

Dodagoudar G.R., Rao B.N., and Sunitha N.V. (2015). “A meshfree method for beams on elastic foundation.“ International Journal of Geotechnical Engineering, 9

ScJ87.

Muthulingam S., and Rao B.N. (2014). “Non-uniform time-to-corrosion initiation in steel reinforced concrete under chloride environment.“ Corrosion Science, 82

ScJ86.

Balu A.S., and Rao B.N. (2014). “Efficient assessment of structural reliability in presence of random and fuzzy uncertainties.“ Journal of Mechanical Design, Transactions of the ASME, 136

ScJ85.

Narayanamurthy V., Rao C.L., and Rao B.N. (2014). “Numerical simulation of ballistic impact on armour plate with a simple plasticity model.“ Defence Science Journal, 64

ScJ84.

Kalanad A., and Rao B.N. (2013). “Edge-crack diagnosis using improved two-dimensional cracked finite element and micro genetic algorithm.“ European Journal of Computational Mechanics, 22

ScJ83.

Balu A.S., and Rao B.N. (2013). “Confidence bounds on design variables using high-dimensional model representation-based inverse reliability analysis.“ Journal of Structural Engineering (United States), 139

ScJ82.

Balu A.S., and Rao B.N. (2013). “High dimensional model representation for structural reliability bounds estimation under mixed uncertainties.“ International Journal of Structural Engineering, 4

ScJ81.

Unnikrishnan V.U., Prasad A.M., and Rao B.N. (2013). “Development of fragility curves using high-dimensional model representation.“ Earthquake Engineering and Structural Dynamics, 42

ScJ80.

Balu A.S., and Rao B.N. (2012). “Estimation of membership function of design variables using HDMR and FFT.“ Electronic Journal of Structural Engineering, 12

ScJ79.

Mukherjee D., Rao B.N., and Prasad A.M. (2012). “Cut-HDMR-based fully equivalent operational model for analysis of unreinforced masonry structures.“ Sadhana - Academy Proceedings in Engineering Sciences, 37

ScJ78.

Balu A.S., and Rao B.N. (2012). “Membership function of failure probability using multicut-high dimensional model representation.“ International Journal of Reliability, Quality and Safety Engineering, 19

ScJ77.

Balu A.S., and Rao B.N. (2012). “Multicut-High Dimensional Model Representation for Structural Reliability Bounds Estimation Under Mixed Uncertainties.“ Computer-Aided Civil and Infrastructure Engineering, 27

ScJ76.

Kalanad A., and Rao B.N. (2012). “Two-dimensional elastic-plastic cracked finite element for fracture applications.“ Indian Journal of Engineering and Materials Sciences, 19

ScJ75.

Balu A.S., and Rao B.N. (2012). “Inverse structural reliability analysis under mixed uncertainties using high dimensional model representation and fast Fourier transform.“ Engineering Structures, 37

ScJ74.

Balu A.S., and Rao B.N. (2012). “High dimensional model representation based formulations for fuzzy finite element analysis of structures.“ Finite Elements in Analysis and Design, 50

ScJ73.

Anand V., Patnaik B.S.V., and Rao B.N. (2012). “Efficient extraction of vortex structures by coupling proper orthogonal decomposition (POD) and high-dimensional model representation (HDMR) techniques.“ Numerical Heat Transfer, Part B: Fundamentals, 61

ScJ72.

Kalanad A., and Rao B.N. (2012). “Improved two-dimensional cracked finite element for crack fault diagnosis.“ Computer Assisted Methods in Engineering and Science, 19

ScJ71.

Balu A.S., and Rao B.N. (2011). “Explicit fuzzy analysis of systems with imprecise properties.“ International Journal of Mechanics and Materials in Design, 7

ScJ70.

Mandali A.K., Sujith M.S., Rao B.N., and Maganti J. (2011). “Reliability analysis of counterfort retaining walls.“ Electronic Journal of Structural Engineering, 11

ScJ69.

Balu A.S., and Rao B.N. (2011). “Efficient high dimensional model representation based method for system reliability bounds estimation for problems with mixed uncertain variables.“ Journal of Structural Engineering (Madras), 38

ScJ68.

Balu A.S., and Rao B.N. (2011). “Efficient explicit formulation for practical fuzzy structural analysis.“ Sadhana - Academy Proceedings in Engineering Sciences, 36

ScJ67.

Rao B.N. (2011). “Coupled meshfree and fractal finite element method for unbounded problems.“ Computers and Geotechnics, 38

ScJ66.

Chowdhury R., and Rao B.N. (2011). “Multicut high dimensional model representation for reliability analysis.“ Structural Engineering and Mechanics, 38

ScJ65.

Kalanad A., and Rao B.N. (2011). “Modified two-dimensional cracked finite element for crack identification.“ Journal of Structural Engineering (Madras), 38

ScJ64.

Mukherjee D., Rao B.N., and Meher Prasad A. (2011). “Global sensitivity analysis of unreinforced masonry structure using high dimensional model representation.“ Engineering Structures, 33

ScJ63.

GHOUSE M.D., RAO C.L., and RAO B.N. (2011). “Numerical modelling of failure of cement concrete using a unit cell approach.“ Sadhana - Academy Proceedings in Engineering Sciences, 36

ScJ62.

Rao B.N., and Rajesh K.N. (2010). “Mode i crack problems by coupled fractal finite element and meshfree method.“ Computer Assisted Mechanics and Engineering Sciences, 17

ScJ61.

Chowdhury R., and Rao B.N. (2010). “Probabilistic stability assessment of slopes using high dimensional model representation.“ Computers and Geotechnics, 37

ScJ60.

Rajesh K.N., and Rao B.N. (2010). “Coupled meshfree and fractal finite element method for mixed mode two-dimensional crack problems.“ International Journal for Numerical Methods in Engineering, 84

ScJ59.

Rajesh K.N., and Rao B.N. (2010). “Coupled element free Galerkin and fractal finite element method for unbounded problems.“ Journal of Structural Engineering (Madras), 37

ScJ58.

Rajesh K.N., and Rao B.N. (2010). “Two-dimensional analysis of anisotropic crack problems using coupled meshless and fractal finite element method.“ International Journal of Fracture, 164

ScJ57.

Chowdhury R., Rao B.N., and Meher Prasad A. (2010). “Hybrid high dimensional model representation for failure probability estimation.“ Journal of Structural Engineering (Madras), 37

ScJ56.

Arun C.O., Rao B.N., and Srinivasan S.M. (2010). “Stochastic meshfree method for elasto-plastic damage analysis.“ Computer Methods in Applied Mechanics and Engineering, 199

ScJ55.

Arun C.O., Rao B.N., and Srinivasan S.M. (2010). “Continuum damage growth analysis using element free Galerkin method.“ Sadhana - Academy Proceedings in Engineering Sciences, 35

ScJ54.

Rao B.N., Chowdhury R., Prasad A.M., Singh R.K., and Kushwaha H.S. (2010). “Reliability analysis of 500MWe PHWR inner containment using high-dimensional model representation.“ International Journal of Pressure Vessels and Piping, 87

ScJ53.

Rao B.N., and Rajesh K.N. (2010). “Coupling of fractal finite element and meshfree methods for mode I crack problems.“ Journal of Structural Engineering (Madras), 36

ScJ52.

Rao B.N., and Kuna M. (2010). “Interaction integrals for thermal fracture of functionally graded piezoelectric materials.“ Engineering Fracture Mechanics, 77

ScJ51.

Chowdhury R., Rao B.N., and Prasad A.M. (2009). “Stochastic sensitivity analysis using HDMR and score function.“ Sadhana - Academy Proceedings in Engineering Sciences, 34

ScJ50.

Reddy R.M., and Rao B.N. (2009). “Probabilistic fracture mechanics by fractal finite element method.“ Journal of Structural Engineering (Madras), 36

ScJ49.

Arun C.O., Rao B.N., and Sivakumar S.M. (2009). “On material discontinuity modeling in element free Galerkin method.“ Journal of Structural Engineering (Madras), 36

ScJ48.

Rao B.N., and Reddy R.M. (2009). “Fractal finite element method based shape sensitivity analysis of multiple crack system.“ Engineering Fracture Mechanics, 76

ScJ47.

Rao B.N., Chowdhury R., Prasad A.M., Singh R.K., and Kushwaha H.S. (2009). “Probabilistic characterization of AHWR Inner Containment using High Dimensional Model Representation.“ Nuclear Engineering and Design, 239

ScJ46.

Chowdhury R., Rao B.N., and Prasad A.M. (2009). “High-dimensional model representation for structural reliability analysis.“ Communications in Numerical Methods in Engineering, 25

ScJ45.

Rao B.N., and Chowdhury R. (2009). “Enhanced high-dimensional model representation for reliability analysis.“ International Journal for Numerical Methods in Engineering, 77

ScJ44.

Chowdhury R., and Rao B.N. (2009). “Hybrid High Dimensional Model Representation for reliability analysis.“ Computer Methods in Applied Mechanics and Engineering, 198

ScJ43.

Chowdhury R., and Rao B.N. (2009). “Assessment of high dimensional model representation techniques for reliability analysis.“ Probabilistic Engineering Mechanics, 24

ScJ42.

Reddy R.M., and Rao B.N. (2008). “Stochastic fracture mechanics by fractal finite element method.“ Computer Methods in Applied Mechanics and Engineering, 198

ScJ41.

Rao B.N., and Chowdhury R. (2008). “Factorized high dimensional model representation for structural reliability analysis.“ Engineering Computations (Swansea, Wales), 25

ScJ40.

Rao B.N., and Ashokkumar R. (2008). “Effect of blow-holes on reliability of cast component.“ Sadhana - Academy Proceedings in Engineering Sciences, 33

ScJ39.

Chowdhury R., and Rao B.N. (2008). “Structural failure probability estimation using HDMR and FFT.“ Electronic Journal of Structural Engineering, 8

ScJ38.

Chowdhury R., Rao B.N., and Prasad A.M. (2008). “High dimensional model representation for piece-wise continuous function approximation.“ Communications in Numerical Methods in Engineering, 24

ScJ37.

Reddy R.M., and Rao B.N. (2008). “Fractal finite element method based shape sensitivity analysis of mixed-mode fracture.“ Finite Elements in Analysis and Design, 44

ScJ36.

Rao B.N., and Chowdhury R. (2008). “Probabilistic analysis using high dimensional model representation and fast fourier transform.“ International Journal of Computational Methods in Engineering Science and Mechanics, 9

ScJ35.

Reddy R.M., and Rao B.N. (2008). “On the calculation of derivatives of stress intensity factors using fractal finite element method.“ Indian Journal of Engineering and Materials Sciences, 15

ScJ34.

Rao B.N., and Kuna M. (2008). “Interaction integrals for fracture analysis of functionally graded piezoelectric materials.“ International Journal of Solids and Structures, 45

ScJ33.

Reddy R.M., and Rao B.N. (2008). “Continuum shape sensitivity analysis of mixed-mode fracture using fractal finite element method.“ Engineering Fracture Mechanics, 75

ScJ32.

Nagapadmaja P., Kalyanaraman V., Satish Kumar S.R., and Rao B.N. (2008). “Fatigue crack propagation analysis of surface cracks in pipe elbows.“ International Journal of Fatigue, 30

ScJ31.

Chowdhury R., Rao B.N., and Meher Prasad A. (2008). “High dimensional model representation based higher order limit state function for reliability analysis.“ Journal of Structural Engineering (Madras), 34

ScJ30.

Rao B.N., and Kuna M. (2008). “Interaction integrals for fracture analysis of functionally graded magnetoelectroelastic materials.“ International Journal of Fracture, 153

ScJ29.

Sunitha N.V., Dodagoudar G.R., and Rao B.N. (2007). “Element free Galerkin method for beams on elastic foundation.“ Journal of Structural Engineering (Madras), 34

ScJ28.

Rao B.N. (2007). “An improved meshfree method for fracture analysis of cracks.“ Journal of Structural Engineering (Madras), 34

ScJ27.

Arun C., and Rao B.N. (2007). “Knowledge based decision support tool for duration and cost overrun analysis of highway construction projects.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 88

ScC38.

Anilkumar P.M., Rao B.N., Haldar A., Scheffler S., Wolniak M., Rolfes R., and Jansen E.L. (2022). “Investigations on the linear vibration characteristics of bistable unsymmetrical laminates".“ In AIAA SCITECH 2022 Forum, San Diego, CA & Virtual, 0258

ScC37.

Anilkumar P.M., Rao B.N., Scheffler S., Rolfes R., Haldar A., and Jansen E.L. (2021). “Numerical studies on the dynamic characteristics of series-connected multistable laminates.“ In Smart Materials, Adaptive Structures and Intelligent Systems, American Society of Mechanical Engineers, Online, V001T07A006

ScC36.

Suresh Kumar R., Rao B.N., and Velusamy K. (2017). “Bridging the gap in predicting the crack initiation of the real life structures by nuclear class-1 piping design philosophies and full scale testing.“ ICF 2017 - 14th International Conference on Fracture

ScC35.

Muthulingam S., and Rao B.N. (2014). “Numerical simulation of non-uniform corrosion states in rebars under natural chloride environment.“ 11th World Congress on Computational Mechanics, WCCM 2014, 5th European Conference on Computational Mechanics, ECCM 2014 and 6th European Conference on Computational Fluid Dynamics, ECFD 2014

ScC34.

Rao B.N., and Rajesh K.N. (2014). “Analysis of anisotropic crack problems using coupled meshless and fractal finite element method.“ IOP Conference Series: Materials Science and Engineering

ScC33.

Rajesh K.N., and Rao B.N. (2014). “Coupled EFGM and FFEM for unbounded problems.“ IOP Conference Series: Materials Science and Engineering

ScC32.

Balu A.S., and Rao B.N. (2014). “Reliability analysis using high dimensional model representation for mixed uncertain variables.“ IOP Conference Series: Materials Science and Engineering

ScC31.

Kalanad A., and Rao B.N. (2014). “Detection of crack location and size in structures using improved damaged finite element.“ IOP Conference Series: Materials Science and Engineering

ScC30.

Sivakumar M.V.N., Rao B.N., and Satishkumar S.R. (2012). “The effect of pressure induced hoop stress on bi-axially loaded through wall cracked cylindrical structures - A strain based method.“ Applied Mechanics and Materials

ScC29.

Unnithan V., Prasad A.M., and Rao B.N. (2010). “Fragility curves for RC buildings using High Dimensional Model Representation.“ 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium

ScC28.

Ghouse M.D., Rao C.L., and Rao B.N. (2010). “Numerical simulation of fracture process in cement concrete using unit cell approach.“ Mechanics of Advanced Materials and Structures

ScC27.

Rajesh K.N., and Rao B.N. (2010). “Coupled EFGM and F2LFEM for fracture analysis of cracks.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC26.

Kuna M., and Rao B.N. (2009). “Interaction integrals for cracks in functionally graded magnetoelectroelastic materials.“ 12th International Conference on Fracture 2009, ICF-12

ScC25.

Reddy R.M., and Rao B.N. (2009). “Fractal finite-element method for evaluating sensitivities of fracture parameters for multiple cracked systems.“ ASME International Mechanical Engineering Congress and Exposition, Proceedings

ScC24.

Rao B.N. (2008). “Interaction integrals for fracture analysis of functionally graded piezoelectric materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC23.

Rao B.N., and Chowdhury R. (2008). “Structural reliability evaluation using enhanced HDMR.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC22.

Reddy R.M., and Rao B.N. (2008). “Probabilistic fracture mechanics using fractal finite element method.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC21.

Kumar R.P., Dodagoudar G.R., and Rao B.N. (2008). “Meshfree modelling of two-dimensional contaminant transport through unsaturated porous media.“ Unsaturated Soils: Advances in Geo-Engineering - Proceedings of the 1st European Conference on Unsaturated Soils, E-UNSAT 2008

ScC20.

Arun C.O., Rao B.N., and Sivakumar S.M. (2008). “Stochastic damage growth analysis using EFGM.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC19.

Rao B.N., and Reddy R.M. (2008). “Fractal finite-element based continuum shape sensitivity analysis of cracks.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC18.

Rao B.N., and Balu A.S. (2008). “Fuzzy meshfree method for fracture analysis of cracks.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC17.

Rao B.N., Chowdhury R., and Prasad A.M. (2008). “Efficient reliability analysis using multi point response surface method.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC16.

Rao B.N., Arun C.O., and Kumar M.S.S. (2008). “Stochastic meshfree method for computational fracture mechanics.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC15.

Meenakshi T., and Rao B.N. (2006). “On comparison of various formulations for evaluation of dynamic SIFs in FGMs.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC14.

Aravinda Priyadarshini K., and Rao B.N. (2006). “Coupled finite element-moving least squares technique for stochastic structural response of cracked structures.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC13.

Nandulal B., Rao B.N., and Lakshmana Rao C. (2006). “An efficient meshfree method for fracture analysis of cracks in BI-materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC12.

Chowdhury R., Rao B.N., and Prasad A.M. (2006). “An improved meshfree method for fracture analysis of cracks.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC11.

Rao B.N., and Rahman S. (2005). “A continuum shape sensitivity method for fracture analysis of orthotropic functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC10.

Rahman S., Xu H., and Rao B.N. (2005). “Probabilistic fracture of isotropic functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC9.

Chowdhury R., Rao B.N., and Meher Prasad A. (2005). “Hysteresis model for RC structural element accounting bi-directional lateral load interaction.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC8.

Rao B.N., and Rahman S. (2004). “A continuum shape sensitivity method for fracture analysis of isotropic functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC7.

Rao B.N., and Rahman S. (2004). “Continuum shape sensitivity analysis of cracks in functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC6.

Rao B.N., and Rahman S. (2003). “A new interaction integral method for analysis of cracks in orthotropic functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC5.

Rao B.N., and Rahman S. (2003). “Continuum shape sensitivity analysis of mode-1 fracture in functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC4.

Tang J., Rao B.N., and Park Y.H. (2003). “American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP: Introduction.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC3.

Rao B.N., and Rahman S. (2002). “A new interaction integral method for mesh-free analysis of cracks in functionally graded materials.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC2.

Rao B.N., and Rahman S. (2002). “Mesh-free simulation in elastic-plastic fracture mechanics.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC1.

Rao B.N., and Rahman S. (2002). “Stochastic meshless analysis of elastic-plastic cracked structures.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP