ScJ87.

Vimala A., Kumar R.P., and Murty C.V.R. (2017). “Expended energy based damage assessment of RC bare frame using nonlinear pushover analysis.“ Indian Concrete Journal, 91

ScJ86.

Saravanan T.J., Rao G.V.R., Prakashvel J., Gopalakrishnan N., Lakshmanan N., and Murty C.V.R. (2017). “Dynamic Testing of Open Ground Story Structure and in Situ Evaluation of Displacement Demand Magnifier.“ Journal of Performance of Constructed Facilities, 31

ScJ85.

Vijayanarayanan A.R., Goswami R., and Murty C.V.R. (2017). “Identifying stiffness irregularity in buildings using fundamental lateral mode shape.“ Earthquake and Structures, 12

ScJ84.

Sunitha P., Goswami R., and Murty C.V.R. (2016). “Idealised bilinear moment-curvature curves of RC sections for pushover analysis of RC frame buildings.“ Indian Concrete Journal, 90

ScJ83.

Sunitha P., Goswami R., and Murty C.V.R. (2016). “Seismic behaviour of RC moment resisting frame buildings designed and detailed as per first revision of IS 13920 draft provisions.“ Indian Concrete Journal, 90

ScJ82.

Majeed A.Z., Goswami R., and Murty C.V.R. (2015). “Mechanics-driven hand calculation approach for obtaining design P-M interaction curves of RC sections.“ Indian Concrete Journal, 89

ScJ81.

Mondal K., Jaiswal A.K., and Murty C.V.R. (2014). “Lateral load behaviour of squat RC structural walls.“ Indian Concrete Journal, 88

ScJ80.

Dasgupta K., and Murty C.V.R. (2014). “Improved geometric design of earthquake-resistant RC slender structural walls. II: Design implications.“ Journal of Engineering Mechanics, 140

ScJ79.

Dasgupta K., and Murty C.V.R. (2014). “Improved geometric design of earthquake-resistant RC slender structural walls. I: Parametric study.“ Journal of Engineering Mechanics, 140

ScJ78.

Rai D.C., Jain S.K., Murty C.V.R., and Bansal D. (2014). “Large capacity reaction floor-wall assembly for pseudo-dynamic testing at IIT Kanpur and its load rating.“ Current Science, 106

ScJ77.

Rohit D.H.H., Jaiswal A.K., and Murty C.V.R. (2013). “Expressions for moment of resistance of RC structural walls.“ Indian Concrete Journal, 87

ScJ76.

Rohit D.H.H., Narahari P., Jaiswal A.K., and Murty C.V.R. (2012). “Superposition principle invalid in IS 13920 design of slender RC walls with boundary elements.“ Indian Concrete Journal, 86

ScJ75.

Malik J.N., Shishikura M., Echigo T., Ikeda Y., Satake K., Kayanne H., Sawai Y., Murty C.V.R., and Dikshit O. (2011). “Geologic evidence for two pre-2004 earthquakes during recent centuries near Port Blair, South Andaman Island, India.“ Geology, 39

ScJ74.

Rohit D.H.H., Narahari P., Sharma R., Jaiswal A., and Murty C.V.R. (2011). “When RC columns become RC structural walls.“ Indian Concrete Journal, 85

ScJ73.

Dasgupta K., Goswami R., and Murty C.V.R. (2010). “Seismic shear design of deep RC vertical members: Recommended provisions for Indian codes.“ Indian Concrete Journal, 84

ScJ72.

Dasgupta K., Goswami R., and Murty C.V.R. (2010). “Seismic shear design of deep RC vertical members: A review of codal provisions.“ Indian Concrete Journal, 84

ScJ71.

Sree Rama D., Murty C., and Satyanarayana C. (2010). “Experimental investigation of RC slabs with increased covers and resulting crack widths.“ Journal of Structural Engineering (Madras), 37

ScJ70.

Goswami R., and Murty C.V.R. (2010). “Externally reinforced welded i-beam-to-box-column seismic connection.“ Journal of Engineering Mechanics, 136

ScJ69.

Goswami R., and Murty C.V.R. (2009). “Suitability of tapered flange I-sections in seismic moment resisting frames.“ Advanced Steel Construction, 5

ScJ68.

Murty C.V.R. (2008). “Seismic strengthening of RC frame buildings: The formal quantitative approaches.“ Journal of Structural Engineering (Madras), 35

ScJ67.

Pradhan P.L., Murty C.V.R., Hoiseth K.V., and Aryal M.P. (2008). “Computer aided non-linear simulation of brick masonry reinforced concrete infill frame under in-plane lateral load.“ Indian Concrete Journal, 82

ScJ66.

Murty C.V.R., Dutta J., and Agrawal S.K. (2008). “Seismic strengthening of brick masonry buildings with twin steel lintel belt.“ Journal of Structural Engineering (Madras), 35

ScJ65.

Murty C.V.R., and Malik J.N. (2008). “Challenges of low-to-moderate seismicity in India.“ Electronic Journal of Structural Engineering, 8

ScJ64.

Behera B., Mishra B.K., and Murty C.V.R. (2007). “Experimental analysis of charge dynamics in tumbling mills by vibration signature technique.“ Minerals Engineering, 20

ScJ63.

Pant M., and Murty C.V.R. (2006). “Improved welded beam-to-column connections in earthquake-resistant steel structures.“ Journal of Structural Engineering (Madras), 33

ScJ62.

Malik J.N., Murty C.V.R., and Rai D.C. (2006). “Landscape changes in the Andaman and Nicobar Islands (India) after the December 2004 great Sumatra earthquake and Indian Ocean tsunami.“ Earthquake Spectra, 22

ScJ61.

Murty C.V.R., Jain S.K., Sheth A.R., Jaiswal A., and Dash S.R. (2006). “Response and recovery in India after the December 2004 Great Sumatra earthquake and Indian Ocean tsunami.“ Earthquake Spectra, 22

ScJ60.

Murty C.V.R., Rai D.C., Jain S.K., Kaushik H.B., Mondal G., and Dash S.R. (2006). “Performance of structures in the Andaman and Nicobar islands (India) during the December 2004 Great Sumatra earthquake and Indian Ocean tsunami.“ Earthquake Spectra, 22

ScJ59.

Rai D.C., Murty C.V.R., Jain S.K., Kaushik H.B., Mondal G., Dash S.R., Tang A., Yashinsky M., and Eskijian M. (2006). “The effect of the December 2004 Great Sumatra earthquake and Indian Ocean tsunami on transportation systems in India's Andaman and Nicobar islands.“ Earthquake Spectra, 22

ScJ58.

Tang A., Rai D.C., Ames D., Murty C.V.R., Jain S.K., Dash S.R., Kaushik H.B., Mondal G., Murugesh G., Plant G., McLaughlin J., Yashinsky M., Eskijian M., and Surrampalli R. (2006). “Lifeline systems in the Andaman and Nicobar islands (India) after the December 2004 Great Sumatra earthquake and Indian Ocean tsunami.“ Earthquake Spectra, 22

ScJ57.

Rai D.C., and Murty C.V.R. (2006). “Effects of the 2005 Muzaffarabad (Kashmir) earthquake on built environment.“ Current Science, 90

ScJ56.

Goswami R., Arlekar J.N., and Murty C.V.R. (2005). “Concerns on seismic moment-shear connections using available Indian hot-rolled I-sections.“ Journal of Structural Engineering (Madras), 32

ScJ55.

Rai D.C., and Murty C.V.R. (2005). “Engineering lessons not learnt from 2002 Diglipur earthquake - A review after 2004 Sumatra earthquake.“ Current Science, 89

ScJ54.

Joshi M.K., Murty C.V.R., and Jaisingh M.P. (2005). “Cyclic behaviour of precast RC connections.“ Indian Concrete Journal, 79

ScJ53.

Goswami R., Arlekar J.N., and Murty C.V.R. (2005). “Limitations of available Indian hot-rolled I-sections for use in seismic steel moment resisting frames.“ Journal of Structural Engineering (Madras), 32

ScJ52.

Arlekar J.N., and Murty C.V.R. (2005). “Future directions for capacity design of welded beam-to-column connections in steel seismic moment resisting frames.“ Structural Engineer, 83

ScJ51.

Malik J.N., and Murty C.V.R. (2005). “Landscape changes in Andaman and Nicobar Islands (India) due to Mw 9.3 tsunamigenic Sumatra earthquake of 26 December 2004.“ Current Science, 88

ScJ50.

Dasgupta K., and Murty C.V.R. (2005). “Seismic design of RC column and wall sections: Part II - Proposal for limiting strain in steel.“ Indian Concrete Journal, 79

ScJ49.

Dasgupta K., and Murty C.V.R. (2005). “Seismic design of RC columns and wall sections: Part I - Consistent limit state design philosophy.“ Indian Concrete Journal, 79

ScJ48.

Jain S.K., Murty C.V.R., Rai D.C., Malik J.N., Sheth A., and Jaiswal A. (2005). “Effects of M 9 Sumatra earthquake and tsunami of 26 December 2004.“ Current Science, 88

ScJ47.

Murty C.V.R. (2005). “Learning earthquake design and construction earthquake tip - 24 - How to reduce earthquake effects on buildings?.“ Journal of Structural Engineering (Madras), 31

ScJ46.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake Tip - 23 - Why are buildings with shear walls preferred in seismic regions?.“ Journal of Structural Engineering (Madras), 31

ScJ45.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake Tip - 21 - Why are open-ground storey buildings vulnerable in earthquakes?.“ Journal of Structural Engineering (Madras), 31

ScJ44.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake Tip - 22 - Why are short columns more damaged during earthquakes?.“ Journal of Structural Engineering (Madras), 31

ScJ43.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake Tip - 20 - How do beam-column joints in RC buildings resist earthquakes?.“ Journal of Structural Engineering (Madras), 31

ScJ42.

Das D., and Murty C.V.R. (2004). “Brick masonry infills in seismic design of RC frame buildings: Part 2 - Behaviour.“ Indian Concrete Journal, 78

ScJ41.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake tip -17 - How do earthquakes affect reinforced concrete buildings?.“ Journal of Structural Engineering (Madras), 31

ScJ40.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake tip -19 - How do columns in RC building resist earthquakes?.“ Journal of Structural Engineering (Madras), 31

ScJ39.

Murty C.V.R. (2004). “Learning earthquake design and construction: Earthquake tip -18 - How do beams in RC buildings resist earthquakes?.“ Journal of Structural Engineering (Madras), 31

ScJ38.

Das D., and Murty C.V.R. (2004). “Brick masonry infills in seismic design of RC framed buildings: Part 1 - Cost implications.“ Indian Concrete Journal, 78

ScJ37.

Murty C.V.R., Dikshit O., Tandon R., Tandon M.C., and Jain S.K. (2004). “Recreating romance of Civil Engineering: 2001 Summer Camp at Indian Institute of Technology Kanpur, India.“ Journal of Professional Issues in Engineering Education and Practice, 130

ScJ36.

Arlekar J.N., and Murty C.V.R. (2004). “Improved truss model for design of welded steel moment-resisting frame connections.“ Journal of Structural Engineering, 130

ScJ35.

Murty C.V.R., Rai D.C., Gupta A., and Jain S.K. (2004). “Introducing earthquake engineering in civil engineering curriculum.“ Indian Concrete Journal, 78

ScJ34.

Murty C.V.R., Dutta J., and Agrawal S.K. (2004). “Twin lintel belt in steel for seismic strengthening of brick masonry buildings.“ Earthquake Engineering and Engineering Vibration, 3

ScJ33.

Dasgupta M.K., Murty C.V.R., and Agrawal S.K. (2003). “Seismic shear design of RC structural walls - Part II: Proposed improvements in IS 13920: 1993 provisions.“ Indian Concrete Journal, 77

ScJ32.

Dasgupta K., Murty C.V.R., and Agrawal S.K. (2003). “Seismic shear design of RC structural walls - Part I: Review of code provisions.“ Indian Concrete Journal, 77

ScJ31.

Murty C.V.R. (2003). “Learning earthquake design and construction earthquake Tip - 14 - Why are horizontal bands necessary in masonry buildings?.“ Journal of Structural Engineering (Madras), 30

ScJ30.

Murty C.V.R. (2003). “Learning earthquake design and construction Earthquake Tip - 16 - How to make stone masonry buildings earthquake resistant?.“ Journal of Structural Engineering (Madras), 30

ScJ29.

Murty C.V.R. (2003). “Learning earthquake design and construction Earthquake Tip - 15 - Why is vertical reinforcement required in masonry buildings?.“ Journal of Structural Engineering (Madras), 30

ScJ28.

Jain S.K., and Murty C.V.R. (2003). “Some innovative education and outreach projects in India for Earthquake risk reduction.“ Seismological Research Letters, 74

ScJ27.

Goswami R., and Murty C.V.R. (2003). “Seismic shear design of RC bridge piers - Part II: Numerical investigation of IRC provisions.“ Indian Concrete Journal, 77

ScJ26.

Murty C.V.R. (2003). “How do brick masonry houses behave during earthquakes?.“ Indian Concrete Journal, 77

ScJ25.

Goswami R., and Murty C.V.R. (2003). “Seismic shear design of RC bridge piers - Part I: Review of code provisions.“ Indian Concrete Journal, 77

ScJ24.

Murty C.V.R., Rai D.C., Bajpai K.K., and Jain S.K. (2003). “Effectiveness of reinforcement details in exterior reinforced concrete beam-column joints for earthquake resistance.“ ACI Structural Journal, 100

ScJ23.

Murty C.V.R. (2002). “How buildings twist during earthquakes?.“ Indian Concrete Journal, 76

ScJ22.

Arlekar J.N., and Murty C.V.R. (2002). “P-V-M interaction curves for seismic design of steel column base connections.“ Engineering Journal, 39

ScJ21.

Murty C.V.R. (2002). “Earthquake tip.“ Indian Concrete Journal, 76

ScJ20.

Verma N.P., and Murty C.V.R. (2001). “A structural mechanics approach to estimate natural frequency of cracked RC beams.“ Indian Concrete Journal, 75

ScJ19.

Mishra B.K., and Murty C.V.R. (2001). “On the determination of contact parameters for realistic DEM simulations of ball mills.“ Powder Technology, 115

ScJ18.

Dutta S.C., Jain S.K., and Murty C.V.R. (2001). “Inelastic seismic torsional behaviour of elevated tanks.“ Journal of Sound and Vibration, 242

ScJ17.

Murty C.V.R., Rai D.C., Bajpai K.K., and Jain S.K. (2001). “Anchorage details and joint design in seismic RC frames.“ Indian Concrete Journal, 75

ScJ16.

Murty C.V.R., Dayal U., Arlekar J., Chaubey S.K., and Jain S.K. (2001). “Preliminary field report on Gujarat earthquake.“ Indian Concrete Journal, 75

ScJ15.

Murty C.V.R. (2001). “Shortcomings in structural design provisions of IS 456 : 2000.“ Indian Concrete Journal, 75

ScJ14.

Murty C.V.R. (2000). “A proposed draft for Indian code provisions on seismic design of bridges - Part II+: Commentary.“ Journal of Structural Engineering (Madras), 27

ScJ13.

Murty C.V.R. (2000). “A proposed draft for Indian code provisions on seismic design of bridges - Part I : Code.“ Journal of Structural Engineering (Madras), 26

ScJ12.

Paul S., Murty C.V.R., and Jain S.K. (2000). “Drift-based re-sizing of steel frames including joint deformations.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 81

ScJ11.

Arlekar J.N., and Murty C.V.R. (2000). “Ambient vibration survey of RC-frame buildings having brick masonry infill walls.“ Indian Concrete Journal, 74

ScJ10.

Dutta S.C., Jain S.K., and Murty C.V.R. (2000). “Assessing the seismic torsional vulnerability of elevated tanks with RC frame-type staging.“ Soil Dynamics and Earthquake Engineering, 19

ScJ9.

Dutta S.C., Jain S.K., and Murty C.V.R. (2000). “Alternate tank staging configurations with reduced torsional vulnerability.“ Soil Dynamics and Earthquake Engineering, 19

ScJ8.

Rajendran K., Rajendran C.P., Jain S.K., Murty C.V.R., and Arlekar J.N. (2000). “The Chamoli earthquake, Garhwal Himalaya: Field observations and implications for seismic hazard.“ Current Science, 78

ScJ7.

Dutta S.C., Murty C.V.R., and Jain S.K. (2000). “Seismic torsional vibration in elevated tanks.“ Structural Engineering and Mechanics, 9

ScJ6.

Rastogi V., and Murty C.V.R. (1999). “Limitations of capacity design provisions in IS:13920-1993.“ Indian Concrete Journal, 73

ScJ5.

Murty C.V.R., Rai Durgesh C., Sinha Ravi, and Jain Sudhir K. (1999). “Workshop on developing earthquake engineering industry in India: Opportunities and challenges.“ Indian Concrete Journal, 73

ScC4.

Sunitha P., Murty C.V.R., and Goswami R. (2014). “Quantifying parameters that ensure large deformability of earthquake resistant RC buildings in high seismic regions.“ NCEE 2014 - 10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering

ScC3.

Rai D.C., Jain S.K., Murty C.V.R., and Bansal D. (2014). “Construction and load rating of a large capacity reaction floor-wall assembly for lateral load testing at IIT Kanpur.“ NCEE 2014 - 10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering

ScC2.

Dasgupta K., and Murty C.V.R. (2010). “Improvement in seismic configuration of slender Reinforced Concrete wall piers on isolated footings.“ 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium

ScC1.

Mishra B.K., Patra T.N., and Murty C.V.R. (2002). “Mixing and segregation of particles in rotating drums using the discrete element method.“ Geotechnical Special Publication