| Journals |
| Click on plus symbols ( ) |
| Scopus Indexed Journals |
|
ScJ19. |
Nagender T., Parulekar Y.M., and Appa Rao G. (2019). “Performance evaluation and hysteretic modeling of low rise reinforced concrete shear walls.“ Earthquake and Structures, 16 |
|
ScJ18. |
Poluraju P., and Appa Rao G. (2018). “Performance of squat 3D sandwich walls with longitudinal reinforcement and boundary elements under lateral cyclic loading.“ Journal of Sandwich Structures and Materials, 20 |
|
ScJ17. |
Appa Rao G., and Nagesh H.E. (2017). “Studies on fracture behaviour of lightly reinforced concrete beams using digital image correlation.“ Journal of Structural Engineering (India), 44 |
|
ScJ16. |
Amaravel R., and Appa Rao G. (2015). “Evaluation of remaining life in years for the damaged RCC bridges-review (railway loadings).“ International Journal of Earth Sciences and Engineering, 8 |
|
ScJ15. |
Pandurangan K., Santhakumar A.R., and Appa Rao G. (2013). “Effect of fusion bonded epoxy coating and rib geometry on the bond strength of reinforced concrete.“ Indian Concrete Journal, 87 |
|
ScJ14. |
Appa Rao G., and Gangaram M. (2012). “Non-invasive protection of shear critical nonseismically detailed RC beamcolumn joints against seismic loading.“ Journal of Structural Engineering (India), 39 |
|
ScJ13. |
Appa Rao G., Prasad B.S.R.K., and Ramamohan Rao K. (2012). “Influence of beam size and distribution of horizontal reinforcement on shear strength of RC deep beams.“ Journal of Structural Engineering (India), 39 |
|
ScJ12. |
Appa Rao G., and Jacob T. (2010). “Evaluation of minimum reinforcement in flexural members based on fracture mechanics.“ Journal of Structural Engineering (Madras), 37 |
|
ScJ11. |
Appa Rao G., Sultana F., and Pandurangan K. (2009). “Bond strength and bond stress-slip response in reinforced concrete.“ Journal of Structural Engineering (Madras), 36 |
|
ScJ10. |
Sreenivasa Rao A., Appa Rao G., and Seshagiri Rao M.V. (2009). “Fracture behaviour and toughness of fiber reinforced concrete under mode II loading.“ Journal of Structural Engineering (Madras), 36 |
|
ScJ9. |
Appa Rao G., Raghu Prasad B.K., and Eligehausen R. (2008). “Characterization of concrete failure from load-CMOD curves and tension softening modulus.“ Journal of Structural Engineering (Madras), 35 |
|
ScJ8. |
Appa Rao G., Vijayanand I., and Eligehausen R. (2008). “Studies on ductility and evaluation of minimum flexural reinforcement in RC beams.“ Materials and Structures/Materiaux et Constructions, 41 |
|
ScJ7. |
Appa Rao G., Mahajan M., Gangaram M., and Eligehausen R. (2008). “Performance of nonseismically designed RC beam column joints strengthened by various schemes subjected to seismic loads - A review.“ Journal of Structural Engineering (Madras), 35 |
|
ScJ6. |
Appa Rao G., Injaganeri S.S., and Suresh P. (2007). “Investigation of size effect on shear strength of reinforced concrete beams.“ Journal of Structural Engineering (Madras), 33 |
|
ScJ5. |
Appa Rao G., and Raghu Prasad B.K. (2005). “Size effect and fracture process zone in high strength concrete.“ Journal of Structural Engineering (Madras), 32 |
|
ScJ4. |
Appa Rao G., and Raghu Prasad B.K. (2005). “Fracture energy of fiber reinforced high strength concrete.“ Journal of Structural Engineering (Madras), 31 |
|
ScJ3. |
Appa Rao G., and Raghu Prasad B.K. (2003). “Strength and fracture toughness of interface in high strength concrete.“ Journal of Structural Engineering (Madras), 30 |
|
ScJ2. |
Appa Rao G. (2001). “Long-term drying shrinkage of mortar- Influence of silica fume and size of fine aggregate.“ Cement and Concrete Research, 31 |
|
ScJ1. |
Appa Rao G. (2000). “Strength development in high strength mortars: Influence of mix proportions.“ Indian Concrete Journal, 74 |
| Conferences |
| Click on plus symbols ( ) |
| Scopus Indexed Conferences |
|
ScC8. |
Ramakrishnan K., and Appa Rao G. (2018). “Assessment of existing shear strength models for reinforced concrete deep beams.“ Proceedings of the 12th fib International PhD Symposium in Civil Engineering |
|
ScC7. |
Poluraju P., and Appa Rao G. (2013). “Seismic behaviour of precast reinforced concrete beam-column connections: A literature review.“ Applied Mechanics and Materials |
|
ScC6. |
Appa Rao G., and Kanaka Durga S. (2013). “Effect of bracing elements on mechanics and shear strength of exterior beam-column joints in moment resisting frames.“ Applied Mechanics and Materials |
|
ScC5. |
Leon R.J., and Appa Rao G. (2013). “Performance of RC deep beams with different combinations of web reinforcement.“ Applied Mechanics and Materials |
|
ScC4. |
Appa Rao G., and Arora J. (2013). “Strength and modes of failure of adhesive anchors in confined concrete under direct tensile loading.“ Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013 |
|
ScC3. |
Appa Rao G., Seshaiah K.V., and Kanaka Durga S. (2013). “Performance of RC beam-column joints with different joint detailing.“ Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013 |
|
ScC2. |
Anupadma R., Mathews M.S., Appa Rao G., and Satyamurthy T. (2012). “Modern repair technique for an ancient temple.“ Concrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012 |
|
ScC1. |
Appa Rao G., and Sreenivasa Rao A. (2009). “Toughness indices of steel fiber reinforced concrete under mode II loading.“ Materials and Structures/Materiaux et Constructions |