ScJ53.

Geevar I., Menon D., and Meher Prasad A. (2020). “Strut-and-tie-based design and testing of reinforced concrete pier caps.“ ACI Structural Journal, 117

ScJ52.

Deepthi T.M., Saravanan U., and Meher Prasad A. (2019). “Algorithms to determine wheel loads and speed of trains using strains measured on bridge girders.“ Structural Control and Health Monitoring, 26

ScJ51.

Ronald J.A., Menon A., Prasad A.M., Menon D., and Magenes G. (2018). “Modelling and analysis of South Indian temple structures under earthquake loading.“ Sadhana - Academy Proceedings in Engineering Sciences, 43

ScJ50.

Anitha Priyadharshani S., Meher Prasad A., and Sundaravadivelu R. (2017). “Analysis of GFRP stiffened composite plates with rectangular cutout.“ Composite Structures, 169

ScJ49.

Cherian P., Paul S., Krishna S.R.G., Menon D., and Meher Prasad A. (2017). “Mass Housing Using GFRG Panels: A Sustainable, Rapid and Affordable Solution.“ Journal of The Institution of Engineers (India): Series A, 98

ScJ48.

Veletsos A.S., Prasad A.M., and Hahn G. (2017). “Fluid-structure interaction effects for offshore structures..“ Earthquake Engineering & Structural Dynamics

ScJ47.

Paul S., Cherian P., Menon D., and Prasad A.M. (2016). “Use of glass fibre reinforced gypsum panels with reinforced concrete infills for construction of walls and slabs.“ Indian Concrete Journal, 90

ScJ46.

Sarkar P., Prasad A.M., and Menon D. (2016). “Seismic evaluation of RC stepped building frames using improved pushover analysis.“ Earthquake and Structures, 10

ScJ45.

Varughese J.A., Menon D., and Prasad A.M. (2015). “Displacement-based seismic design of open ground storey buildings.“ Structural Engineering and Mechanics, 54

ScJ44.

Biswal A., Meher Prasad A., and Sengupta A.K. (2015). “Investigation of shear behaviour of vertical joints between precast concrete wall panels.“ Indian Concrete Journal, 89

ScJ43.

Balasubramanian S.R., Maheswari D., Cynthia A., Balaji Rao K., Prasad A.M., Goswami R., and Sivakumar P. (2015). “Experimental determination of statistical parameters associated with uniaxial compression behaviour of brick masonry.“ Current Science, 109

ScJ42.

Varughese J.A., Menon D., and Meher Prasad A. (2014). “Load Distribution Patterns for Displacement-based Seismic Design of RC Framed Buildings.“ Journal of The Institution of Engineers (India): Series A, 95

ScJ41.

Balasubramanian S.R., Balaji Rao K., Meher Prasad A., Goswami R., and Anoop M.B. (2014). “A methodology for development of seismic fragility curves for URBM buildings.“ Earthquake and Structures, 6

ScJ40.

Janardhana M., Robin Davis P., Ravichandran S.S., Prasad A.M., and Menon D. (2014). “Calibration of a hysteretic model for glass fiber reinforced gypsum wall panels.“ Earthquake Engineering and Engineering Vibration, 13

ScJ39.

Rama Raju K., Meher Prasad A., Muthumani K., Gopalakrishnan N., Iyer N.R., and Lakshmanan N. (2013). “Experimental studies on use of toggle brace mechanism fitted with magnetorheological dampers for seismic performance enhancement of three-storey steel moment-resisting frame model.“ Structural Control and Health Monitoring, 20

ScJ38.

Arun S., Menon D., and Prasad A.M. (2013). “Dynamic amplification factors for highway bridges: State-of-the-art.“ Journal of Structural Engineering (India), 40

ScJ37.

Unnikrishnan V.U., Prasad A.M., and Rao B.N. (2013). “Development of fragility curves using high-dimensional model representation.“ Earthquake Engineering and Structural Dynamics, 42

ScJ36.

Sreekala R., Prasad A.M., Muthumani K., Lakshmanan N., and Iyer N.R. (2013). “Near fault earthquakes and behaviour of liquid storage tanks.“ Journal of Structural Engineering (India), 40

ScJ35.

Mukherjee D., Rao B.N., and Prasad A.M. (2012). “Cut-HDMR-based fully equivalent operational model for analysis of unreinforced masonry structures.“ Sadhana - Academy Proceedings in Engineering Sciences, 37

ScJ34.

Varughese J.A., Menon D., and Prasad A.M. (2012). “Comparison of force-based and displacement-based methods for seismic design of buildings.“ Journal of Structural Engineering (India), 39

ScJ33.

Rama Raju K., Meher Prasad A., and Iyer N.R. (2011). “Neurosemiactive control of 3-storey moment resistant frame with magnetorheological dampers.“ Journal of Structural Engineering (Madras), 38

ScJ32.

Surya R., Menon D., and Prasad A.M. (2011). “Optimal design of prestressed concrete railtrack sleepers.“ Indian Concrete Journal, 85

ScJ31.

Mukherjee D., Rao B.N., and Meher Prasad A. (2011). “Global sensitivity analysis of unreinforced masonry structure using high dimensional model representation.“ Engineering Structures, 33

ScJ30.

Sreekala R., Lakshmanan N., Muthumani K., Gopalakrishnan N., and Meher Prasad A. (2011). “Development of a simplified damage model for beams aiding performance based seismic design.“ Advances in Structural Engineering, 14

ScJ29.

Chowdhury R., Rao B.N., and Meher Prasad A. (2010). “Hybrid high dimensional model representation for failure probability estimation.“ Journal of Structural Engineering (Madras), 37

ScJ28.

Sarkar P., Prasad A.M., and Menon D. (2010). “Vertical geometric irregularity in stepped building frames.“ Engineering Structures, 32

ScJ27.

Rao B.N., Chowdhury R., Prasad A.M., Singh R.K., and Kushwaha H.S. (2010). “Reliability analysis of 500MWe PHWR inner containment using high-dimensional model representation.“ International Journal of Pressure Vessels and Piping, 87

ScJ26.

Sreekala R., Muthumani K., Meher Prasad A., Gopalakrishnan N., and Sathishkumar K. (2010). “Towards a sustainable infrastructure through smart dampers.“ Journal of Structural Engineering (Madras), 37

ScJ25.

Chowdhury R., Rao B.N., and Prasad A.M. (2009). “Stochastic sensitivity analysis using HDMR and score function.“ Sadhana - Academy Proceedings in Engineering Sciences, 34

ScJ24.

Rajasankar J., Iyer N.R., and Meher Prasad A. (2009). “Quasi-static analysis of reinforced concrete frame structures using a continuum damage mechanics based model.“ Journal of Structural Engineering (Madras), 36

ScJ23.

Rao B.N., Chowdhury R., Prasad A.M., Singh R.K., and Kushwaha H.S. (2009). “Probabilistic characterization of AHWR Inner Containment using High Dimensional Model Representation.“ Nuclear Engineering and Design, 239

ScJ22.

Chowdhury R., Rao B.N., and Prasad A.M. (2009). “High-dimensional model representation for structural reliability analysis.“ Communications in Numerical Methods in Engineering, 25

ScJ21.

Chowdhury R., Rao B.N., and Prasad A.M. (2008). “High dimensional model representation for piece-wise continuous function approximation.“ Communications in Numerical Methods in Engineering, 24

ScJ20.

Gandhi P., Satish Kumar S.R., Meher Prasad A., and Ramachandra Murthy D.S. (2008). “Fatigue crack growth and fracture studies on straight pipes with circumferential surface notch.“ Journal of Structural Engineering (Madras), 35

ScJ19.

Meher Prasad A., and Menon D. (2008). “Earthquake resistant design practice and research in India.“ Structural Engineer, 86

ScJ18.

Chowdhury R., Rao B.N., and Meher Prasad A. (2008). “High dimensional model representation based higher order limit state function for reliability analysis.“ Journal of Structural Engineering (Madras), 34

ScJ17.

Chowdhury R., Rao B.N., and Meher Prasad A. (2007). “Development of a new bi-directional hysteresis model for RC structural element.“ Journal of Structural Engineering (Madras), 34

ScJ16.

Sriramula S., Menon D., and Prasad A.M. (2007). “Axle load variations and vehicle growth projection models for safety assessment of transportation structures.“ Transport, 22

ScJ15.

Srinivas S., Menon D., and Prasad A.M. (2006). “Multivariate simulation and multimodal dependence modeling of vehicle axle weights with copulas.“ Journal of Transportation Engineering, 132

ScJ14.

Uma S.R., and Prasad A.M. (2006). “Seismic behaviour of beam-column joints in RC moment resisting frames: A review.“ Indian Concrete Journal, 80

ScJ13.

Rama Raju K., Meher Prasad A., Abdul Malik S., and Ramesh M. (2005). “Effectiveness of nonlinear viscous fluid dampers with upper toggle brace mechanism in vibration control of a steel moment resistant frame model.“ Journal of Structural Engineering (Madras), 32

ScJ12.

Rama Raju K., Meher Prasad A., Lakshmanan N., Muthumani K., Jagadish D.R., and Amuthasheela R. (2005). “Optimum distribution of viscous fluid dampers in structural systems.“ Journal of the Institution of Engineers (India): Civil Engineering Division, 86

ScJ11.

Chandran S., Prasad A.M., and Menon D. (2005). “Structural distress of the corbelled vaults in the Ta Prohm temple of Angkor Wat.“ Journal of Structural Engineering (Madras), 32

ScJ10.

Jaya K.P., and Prasad A.M. (2004). “Dynamic behaviour of pile foundations in layered soil medium using cone frustums.“ Geotechnique, 54

ScJ9.

Uma S.R., and Meher Prasad A. (2003). “Analytical model for beam column joint in RC frames under seismic conditions.“ Journal of Structural Engineering (Madras), 30

ScJ8.

Unnithan G., KrishnaKumar R., and Prasad A. (2003). “Application of a shell-spring model for the optimization of radial tire contour using a genetic algorithm.“ Tire Science and Technology, 31

ScJ7.

Jaya K.P., and Meher Prasad A. (2002). “Embedded foundation in layered soil under dynamic excitations.“ Soil Dynamics and Earthquake Engineering, 22

ScJ6.

Madhavan Pillai T.M., and Meher Prasad A. (2000). “Fatigue reliability analysis in time domain for inspection strategy of fixed offshore structures.“ Ocean Engineering, 27

ScJ5.

Madhavan Pillai T.M., and Meher Prasad A. (1998). “Fatigue reliability analysis and inspection strategy of jacket structures.“ Journal of Structural Engineering (Madras), 25

ScJ4.

Prasad Varma Thampan C.K., Meher Prasad A., and Krishnamoorthy C.S. (1998). “Genetic algorithms-based methodology for reliability-based structural optimization.“ Journal of Structural Engineering (Madras), 25

ScJ3.

Veletsos A.S., Prasad A.M., and Wu W.H. (1997). “Transfer functions for rigid rectangular foundations.“ Earthquake Engineering and Structural Dynamics, 26

ScJ2.

Veletsos A.S., and Prasad A.M. (1989). “Seismic interaction of structures and soils: Stochastic approach.“ Journal of Structural Engineering (United States), 115

ScJ1.

Veletsos A.S., Prasad A.M., and Hahn G. (1988). “Fluid structure interaction effects for offshore structures.“ Earthquake Engineering & Structural Dynamics, 16

ScC14.

Adrija D., Geevar I., Menon D., and Prasad A.M. (2017). “Assessment of Strut-and-Tie Methods to Estimate Ultimate Strength of RC Deep Beams.“ Lecture Notes in Engineering and Computer Science

ScC13.

Arun S., Menon D., and Prasad A.M. (2014). “A numerical model including bridge vehicle interaction effects for probabilistic assessment of stress spectrum in highway bridges.“ Bridge Maintenance, Safety, Management and Life Extension - Proceedings of the 7th International Conference of Bridge Maintenance, Safety and Management, IABMAS 2014

ScC12.

Padhy T.K., Prasad A.M., and Menon D. (2013). “Reliability based seismic performance evaluation of open ground storey buildings.“ Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013

ScC11.

Jayalekshmi B.R., Menon D., and Meher Prasad A. (2011). “Effect of soil-structure interaction on along-wind response of tall RC chimneys.“ Computer Methods for Geomechanics: Frontiers and New Applications

ScC10.

Agarwal S.K., Narayanan G., Prasad A.M., and Sujatha C. (2011). “Effect of track on the dynamics of railway steel plate girder bridges.“ 18th International Congress on Sound and Vibration 2011, ICSV 2011

ScC9.

Unnithan V., Prasad A.M., and Rao B.N. (2010). “Fragility curves for RC buildings using High Dimensional Model Representation.“ 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium

ScC8.

Robin D.P., Padhy T.K., Menon D., and Prasad A.M. (2010). “Seismic fragility of open ground story buildings in India.“ 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium

ScC7.

Janardhana M., Prasad A.M., and Menon D. (2008). “Behaviour of glass fibre reinforced gypsum wall panel under cyclic lateral loading.“ Proceedings of the 4th International Structural Engineering and Construction Conference, ISEC-4 - Innovations in Structural Engineering and Construction

ScC6.

Rao B.N., Chowdhury R., and Prasad A.M. (2008). “Efficient reliability analysis using multi point response surface method.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC5.

Sriramula S., Menon D., and Prasad A.M. (2007). “Correlation measures: Robustness and performance in simulations.“ Applications of Statistics and Probability in Civil Engineering - Proceedings of the 10th International Conference on Applications of Statistics and Probability, ICASP10

ScC4.

Prathibha S., and Prasad A.M. (2006). “Performance based seismic evaluation of non ductile RCMRF buildings with brick infill.“ 8th US National Conference on Earthquake Engineering 2006

ScC3.

Janardhana M., Meher Prasad A., and Menon D. (2006). “Studies on the behavior of Glass fiber reinforced gypsum wall panels.“ 8th US National Conference on Earthquake Engineering 2006

ScC2.

Chowdhury R., Rao B.N., and Prasad A.M. (2006). “An improved meshfree method for fracture analysis of cracks.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

ScC1.

Chowdhury R., Rao B.N., and Meher Prasad A. (2005). “Hysteresis model for RC structural element accounting bi-directional lateral load interaction.“ American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP