ScJ34.

Shariff M.N., Saravanan U., and Menon D. (2020). “Time-Dependent Strains in Axially Loaded Reinforced Concrete Columns.“ Journal of Engineering Mechanics, 146

ScJ33.

Ananthapadmanabhan S., and Saravanan U. (2020). “Numerical techniques for solving truss problems involving viscoelastic materials.“ International Journal of Non-Linear Mechanics, 122

ScJ32.

Gokulnath C., and Saravanan U. (2020). “Modeling the non-dissipative response of vulcanized unfilled rubber.“ International Journal of Engineering Science, 148

ScJ31.

Pitchai P., Saravanan U., and Goswami R. (2019). “Mechanics-based algorithms to determine the current state of a bridge using quasi-static loading and strain measurement.“ Structural Health Monitoring, 18

ScJ30.

Shariff M.N., Saravanan U., Menon D., and Rajagopal K.R. (2019). “Analysis of the ASTM C512 Spring-Loaded CREEP Frame.“ Journal of Materials in Civil Engineering, 31

ScJ29.

Deepa S., Saravanan U., and Murali Krishnan J. (2019). “On measurement of dynamic modulus for bituminous mixtures.“ International Journal of Pavement Engineering, 20

ScJ28.

Gokulnath C., Varaprasad D., and Saravanan U. (2019). “A three dimensional constitutive model for plain cement concrete.“ Construction and Building Materials, 203

ScJ27.

Vivek P.V., and Saravanan U. (2019). “Large deformation axial element for implicit constitutive relations.“ International Journal of Non-Linear Mechanics, 110

ScJ26.

Deepthi T.M., Saravanan U., and Meher Prasad A. (2019). “Algorithms to determine wheel loads and speed of trains using strains measured on bridge girders.“ Structural Control and Health Monitoring, 26

ScJ25.

Gouder C., and Saravanan U. (2018). “Modeling diffusion and reaction of sulfates with cement concrete using mixture theory.“ Acta Mechanica, 229

ScJ24.

Gokulnath C., Saravanan U., and Rajagopal K.R. (2017). “Representations for implicit constitutive relations describing non-dissipative response of isotropic materials.“ Zeitschrift fur Angewandte Mathematik und Physik, 68

ScJ23.

Mahalingam M., Ravindran P., Saravanan U., and Rajagopal K.R. (2017). “Two boundary value problems involving an inhomogeneous viscoelastic solid.“ Discrete and Continuous Dynamical Systems - Series S, 10

ScJ22.

Jahnavi S., Saravanan U., Arthi N., Bhuvaneshwar G.S., Kumary T.V., Rajan S., and Verma R.S. (2017). “Biological and mechanical evaluation of a Bio-Hybrid scaffold for autologous valve tissue engineering.“ Materials Science and Engineering C, 73

ScJ21.

Gouder C., and Saravanan U. (2016). “Modeling diffusion of sulfate through concrete using mixture theory.“ Acta Mechanica, 227

ScJ20.

Shankar L.S., Rajthilak S., and Saravanan U. (2016). “Numerical technique for solving truss and plane problems for a new class of elastic bodies.“ Acta Mechanica, 227

ScJ19.

Hariharaputhiran H., and Saravanan U. (2016). “A new set of biaxial and uniaxial experiments on vulcanized rubber and attempts at modeling it using classical hyperelastic models.“ Mechanics of Materials, 92

ScJ18.

Paranjothi K., and Saravanan U. (2015). “Identifying hyperelastic and isotropic materials by examining the variation of principal direction of left Cauchy-Green deformation tensor in uniaxial loading.“ International Journal of Solids and Structures, 63

ScJ17.

Saravanan U. (2014). “Mechanical experiments to identify homogeneous bodies.“ International Journal of Solids and Structures, 51

ScJ16.

Kumar S.A., Sarvanan U., Krishnan J.M., and Veeraragavan A. (2014). “Rheological characterisation of modified binders at mixing and compaction temperature.“ International Journal of Pavement Engineering, 15

ScJ15.

PrůrÅ¡a V., Rajagopal K.R., and Saravanan U. (2013). “Fidelity of the estimation of the deformation gradient from data deduced from the motion of markers placed on a body that is subject to an inhomogeneous deformation field.“ Journal of Biomechanical Engineering, 135

ScJ14.

Padmarekha A., Chockalingam K., Saravanan U., Deshpande A.P., and Krishnan J.M. (2013). “Large amplitude oscillatory shear of unmodified and modified bitumen.“ Road Materials and Pavement Design, 14

ScJ13.

Saravanan U. (2012). “On the use of linear viscoelastic constitutive relations to model asphalt.“ International Journal of Pavement Engineering, 13

ScJ12.

Reddy K.S., Umakanthan S., and Krishnan J.M. (2012). “Constant strain rate experiments and constitutive modeling for a class of bitumen.“ Mechanics of Time-Dependent Materials, 16

ScJ11.

Rajagopal K.R., and Saravanan U. (2012). “Extension, inflation and circumferential shearing of an annular cylinder for a class of compressible elastic bodies.“ Mathematics and Mechanics of Solids, 17

ScJ10.

Sreenath S., Saravanan U., and Kalyanaraman V. (2011). “Beam and shell element model for advanced analysis of steel structural members.“ Journal of Constructional Steel Research, 67

ScJ9.

Rajagopal K.R., and Saravanan U. (2011). “Spherical inflation of a class of compressible elastic bodies.“ International Journal of Non-Linear Mechanics, 46

ScJ8.

Saravanan U. (2011). “On large elastic deformation of prestressed right circular annular cylinders.“ International Journal of Non-Linear Mechanics, 46

ScJ7.

Chockalingam K., Saravanan U., and Murali Krishnan J. (2010). “Characterization of petroleum pitch using steady shear experiments.“ International Journal of Engineering Science, 48

ScJ6.

Saravanan U. (2008). “Representation for stress from a stressed reference configuration.“ International Journal of Engineering Science, 46

ScJ5.

Saravanan U., Baek S., Rajagopal K.R., and Humphrey J.D. (2006). “On the deformation of the circumflex coronary artery during inflation tests at constant length.“ Experimental Mechanics, 46

ScJ4.

Saravanan U., and Rajagopal K.R. (2005). “Inflation, extension, torsion and shearing of an inhomogeneous compressible elastic right circular annular cylinder.“ Mathematics and Mechanics of Solids, 10

ScJ3.

Saravanan U., and Rajagopal K.R. (2003). “On the role of inhomogeneities in the deformation of elastic bodies.“ Mathematics and Mechanics of Solids, 8

ScJ2.

Saravanan U., and Rajagopal K.R. (2003). “A comparison of the response of isotropic inhomogeneous elastic cylindrical and spherical shells and their homogenized counterparts.“ Journal of Elasticity, 71

ScJ1.

Saravanan U., Sivakumar S.M., and Kalyanaraman V. (2001). “A study on the design and behavior of smart antenna.“ Smart Materials and Structures, 10

ScC5.

Deepa S., Saravanan U., and Murali Krishnan J. (2016). “Issues related to measurement of dynamic modulus of bituminous mixtures.“ Functional Pavement Design - Proceedings of the 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016

ScC4.

Saravanan U. (2011). “On the adequacy of the existing restrictions on the constitutive relations to ensure reasonable elastic response of compressible bodies.“ Mechanics Research Communications

ScC3.

Paranjothi K., Saravanan U., KrishnaKumar R., and Balakrishnan K.R. (2011). “Mechanical properties of human saphenous vein.“ Conference Proceedings of the Society for Experimental Mechanics Series

ScC2.

Paranjothi K., Saravanan U., KrishnaKumar R., and Balakrishnan K.R. (2011). “Mechanical properties of abnormal human aortic and mitral valves.“ Conference Proceedings of the Society for Experimental Mechanics Series

ScC1.

Hariharaputhiran H., and Saravanan U. (2010). “Experiments to find constitutive relation for materials undergoing large deformation.“ Proceedings of SPIE - The International Society for Optical Engineering